http://bugzilla.novell.com/show_bug.cgi?id=594199 http://bugzilla.novell.com/show_bug.cgi?id=594199#c15 --- Comment #15 from Dan Elder <delder@novacoast.com> 2010-04-07 15:34:54 UTC --- file -k *.raw zenboot.x86_64-0.7.0.raw: x86 boot sector; GRand Unified Bootloader, stage1 version 0x3, stage2 address 0x2000, stage2 segment 0x200, GRUB version 0.97; partition 1: ID=0x83, active, starthead 1, startsector 63, 1654632 sectors zenboot.x86_64-0.7.1.raw: x86 boot sector; partition 1: ID=0x83, active, starthead 1, startsector 63, 1654632 sectors I apologize for not responding sooner, these time zones keep getting in my way. I was able to move the images to my local machine and qemu does run them just fine. Putting zenboot.x86_64-0.7.1.raw on usb stick though still fails while zenboot.x86_64-0.7.0.raw works. I will try testing this on some different hardware to see if there might be a BIOS related issue causing the issue and also test with different USB sticks. /sbin/sfdisk -l *.raw Disk zenboot.x86_64-0.7.0.raw: cannot get geometry Disk zenboot.x86_64-0.7.0.raw: 103 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System zenboot.x86_64-0.7.0.raw1 * 0+ 102 103- 827316 83 Linux zenboot.x86_64-0.7.0.raw2 0 - 0 0 0 Empty zenboot.x86_64-0.7.0.raw3 0 - 0 0 0 Empty zenboot.x86_64-0.7.0.raw4 0 - 0 0 0 Empty Disk zenboot.x86_64-0.7.1.raw: cannot get geometry Disk zenboot.x86_64-0.7.1.raw: 103 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System zenboot.x86_64-0.7.1.raw1 * 0+ 102 103- 827316 83 Linux zenboot.x86_64-0.7.1.raw2 0 - 0 0 0 Empty zenboot.x86_64-0.7.1.raw3 0 - 0 0 0 Empty zenboot.x86_64-0.7.1.raw4 0 - 0 0 0 Empty -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.