https://bugzilla.novell.com/show_bug.cgi?id=731537 https://bugzilla.novell.com/show_bug.cgi?id=731537#c0 Summary: speednetwork limit 10Mbit with sky2 driver Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: markes.albert@gmail.com QAContact: qa@suse.de Found By: --- Blocker: --- Created an attachment (id=463025) --> (http://bugzilla.novell.com/attachment.cgi?id=463025) dmesg complete User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 New installation on Laptop, network speed limit is set to 10Mbit, on same PC openSUSE 11.4 speed limit is correctly set accori switch (10/100/1000Mbit). This is extract from dmesg [ 10.086040] sky2: driver version 1.29 [ 10.086149] sky2 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 10.086233] sky2 0000:07:00.0: setting latency timer to 64 [ 10.092508] sky2 0000:07:00.0: Yukon-2 Optima chip revision 1 [ 10.093395] sky2 0000:07:00.0: irq 43 for MSI/MSI-X [ 10.095425] sky2 0000:07:00.0: eth0: addr 00:24:54:84:61:af [ 14.894743] sky2 0000:07:00.0: eth0: enabling interface [ 16.668082] sky2 0000:07:00.0: eth0: Link is up at 10 Mbps, full duplex, flow control both ethtool eth0 output is Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pg Wake-on: g Current message level: 0x000000ff (255) drv probe link timer ifdown ifup rx_err tx_err with follow command ethtool -s eth0 speed 100 duplex full network speed is set correctly. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.