https://bugzilla.novell.com/show_bug.cgi?id=775746 https://bugzilla.novell.com/show_bug.cgi?id=775746#c17 --- Comment #17 from John Langley <j.langley@gmx.net> 2012-11-09 15:09:52 UTC --- Created an attachment (id=512689) --> (http://bugzilla.novell.com/attachment.cgi?id=512689) dmesg log 16.10.2012 Attached is another dmesg file, i will add 2 more later. Regarding hardware error i swapped all parts (different PC, different ATA cables) except hard disks. The errors persist. But i ordered 2 new hard disks which will arrive this week. I will inform you if the errors persist. In fact one hard disk (sda) is reporting a smartd error since some days (refer to dmesg output). Is it possible that the errors are related to the weird way i set up my raid arrays? Instead of having 1 partition per hard disk configured as raid device and the raid device partitioned for file systems - as done with hardware raids, i did it the other way round: Each hard disk with 4 patitions and only (sda2,sdb2) or (sda4,sdb4) respectively is assembled to an raid array: (sda2,sdb2)=>md0, (sda4,sdb4)=>md1 Device Boot Start End Blocks Id System /dev/sda1 2048 2105343 1051648 82 Linux swap / Solaris /dev/sda2 * 2105344 85995519 41945088 fd Linux raid autodetect /dev/sda3 85995520 98574335 6289408 a0 IBM Thinkpad hibernation /dev/sda4 98574336 976773119 439099392 fd Linux raid autodetect -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.