https://bugzilla.novell.com/show_bug.cgi?id=739344 https://bugzilla.novell.com/show_bug.cgi?id=739344#c2 Jan Pospisil <j.pospis@volny.cz> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |j.pospis@volny.cz --- Comment #2 from Jan Pospisil <j.pospis@volny.cz> 2012-01-03 21:52:18 UTC --- OK,digging deeper into the issue revealed it may be linked to the following in dmesg output: [ 1.707279] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.707304] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.707314] ata2.01: link offline, clearing class 3 to NONE [ 1.711383] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX01, max UDMA/100 [ 1.716254] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.716278] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.733353] ata2.00: configured for UDMA/100 [ 1.833846] ata2.00: TEST_UNIT_READY failed (err_mask=0x2) [ 6.701947] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 6.701949] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.721143] ata1.00: configured for UDMA/133 [ 7.462120] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.462144] ata2.01: SATA link down (SStatus 0 SControl 300) [ 7.462154] ata2.01: link offline, clearing class 3 to NONE [ 7.503170] ata2.00: configured for UDMA/100 [ 12.497707] ata2.00: qc timeout (cmd 0xa0) [ 12.497711] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 12.497716] ata2.00: limiting SATA link speed to 1.5 Gbps [ 12.497719] ata2.00: limiting speed to UDMA/100:PIO3 [ 13.257909] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 13.257933] ata2.01: SATA link down (SStatus 0 SControl 300) [ 13.257943] ata2.01: link offline, clearing class 3 to NONE [ 13.298958] ata2.00: configured for UDMA/100 [ 18.293455] ata2.00: qc timeout (cmd 0xa0) [ 18.293459] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 18.293462] ata2.00: disabled [ 18.293481] ata2.00: hard resetting link [ 18.598112] ata2.01: hard resetting link [ 19.053671] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 19.053696] ata2.01: SATA link down (SStatus 0 SControl 300) [ 19.053706] ata2.01: link offline, clearing class 3 to NONE [ 19.053708] ata2: EH complete There is apparently a problem when the DVD drive is connected to SATA3 port. Moving it to SATA2 cleared the issue and helped opensuse 12.1 detect the drive. There are more people out there having the same issue as I found out and they claim some other distros do not have this problem. Did not have time to check this yet. However, in my humble opinion, this should be fixed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.