https://bugzilla.novell.com/show_bug.cgi?id=656642 https://bugzilla.novell.com/show_bug.cgi?id=656642#c0 Summary: wlan does not work after upgrade to milestone 4 Classification: openSUSE Product: openSUSE 11.4 Version: Milestone 4 of 6 Platform: 32bit OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: harmie@opensuse.fi QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; fi-FI; rv:1.9.2.10) Gecko/20100914 SUSE/3.6.10-3.4 Firefox/3.6.10 After upgrading from opensuse 11.2 milestone 2 to milestone 3 & 4 my wireless stops working. It will connect after boot for short time but after a few minutes it drops the connection and keeps asking the wireless password without connecting it again. It works in milestone 2 which I have installed in separate partition. I have this in /var/log/messages Nov 30 20:53:01 compaq kernel: [ 334.579202] b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 Nov 30 20:53:01 compaq kernel: [ 334.579250] b43-phy0 ERROR: This device does not support DMA on your system. It will now be switched to PIO. Nov 30 20:53:01 compaq kernel: [ 334.579263] b43-phy0: Controller RESET (DMA error) ... Nov 30 20:53:01 compaq kernel: [ 334.579283] b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 Nov 30 20:53:01 compaq kernel: [ 334.579287] b43-phy0 ERROR: This device does not support DMA on your system. It will now be switched to PIO. Nov 30 20:53:01 compaq kernel: [ 334.579299] b43-phy0: Controller RESET (DMA error) ... Nov 30 20:53:01 compaq kernel: [ 334.822751] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) Nov 30 20:53:03 compaq kernel: [ 336.898460] b43-phy0: Controller restarted Nov 30 20:53:04 compaq kernel: [ 337.122738] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) Nov 30 20:53:06 compaq kernel: [ 339.207657] b43-phy0: Controller restarted Nov 30 20:53:17 compaq kernel: [ 350.505091] ieee80211 phy0: wlan0: No probe response from AP 00:24:01:e7:ff:1c after 500ms, disconnecting. Nov 30 20:53:17 compaq kernel: [ 350.521898] cfg80211: Calling CRDA to update world regulatory domain Nov 30 20:53:17 compaq kernel: [ 350.534410] cfg80211: World regulatory domain updated: Nov 30 20:53:17 compaq kernel: [ 350.534423] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 30 20:53:17 compaq kernel: [ 350.534427] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 30 20:53:17 compaq kernel: [ 350.534439] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 30 20:53:17 compaq kernel: [ 350.534442] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 30 20:53:17 compaq kernel: [ 350.534454] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 30 20:53:17 compaq kernel: [ 350.534457] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 30 20:53:18 compaq kernel: [ 351.954775] wlan0: authenticate with 00:24:01:e7:ff:1c (try 1) Nov 30 20:53:19 compaq kernel: [ 352.154102] wlan0: authenticate with 00:24:01:e7:ff:1c (try 2) Nov 30 20:53:19 compaq kernel: [ 352.354071] wlan0: authenticate with 00:24:01:e7:ff:1c (try 3) Nov 30 20:53:19 compaq kernel: [ 352.554103] wlan0: authentication with 00:24:01:e7:ff:1c timed out Nov 30 20:53:33 compaq avahi-daemon[1670]: Withdrawing address record for 10.10.10.10 on wlan0. Nov 30 20:53:33 compaq avahi-daemon[1670]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.10.10.10. Nov 30 20:53:33 compaq avahi-daemon[1670]: Interface wlan0.IPv4 no longer relevant for mDNS. Here is more details about the hw 25: PCI 600.0: 0282 WLAN controller [Created at pci.318] Unique ID: y9sn.YXxFBNiV6c8 Parent ID: WL76.MLkyAiVHgf0 SysFS ID: /devices/pci0000:00/0000:00:09.0/0000:06:00.0 SysFS BusID: 0000:06:00.0 Hardware Class: network Model: "Broadcom BCM4312 802.11b/g" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4315 "BCM4312 802.11b/g" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x1508 Revision: 0x01 Driver: "b43-pci-bridge" Driver Modules: "ssb" Device File: wlan0 Features: WLAN Memory Range: 0x92000000-0x92003fff (rw,non-prefetchable) IRQ: 17 (no events) HW Address: 90:4c:e5:6e:d4:c5 Link detected: no WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v000014E4d00004315sv0000103Csd00001508bc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #5 (PCI bridge) These are the installed packages rpm -qa | grep -i network NetworkManager-0.8.1-1.7.i586 kdenetwork4-filesharing-4.5.1-1.4.i586 NetworkManager-glib-0.8.1-1.7.i586 NetworkManager-openvpn-0.8.1-1.6.i586 NetworkManager-pptp-kde4-0.9.svn1161677-1.1.i586 glib-networking-2.25.0-1.3.i586 yast2-network-2.19.38-1.2.i586 NetworkManager-vpnc-kde4-0.9.svn1161677-1.1.i586 libproxy1-networkmanager-0.4.6-2.4.i586 NetworkManager-vpnc-0.8.1-1.6.i586 NetworkManager-kde4-libs-0.9.svn1161677-1.1.i586 NetworkManager-kde4-0.9.svn1161677-1.1.i586 NetworkManager-pptp-0.8.1-1.6.i586 NetworkManager-openvpn-kde4-0.9.svn1161677-1.1.i586 Reproducible: Always Steps to Reproduce: 1.upgrade from milestone 2 to milestone 3 or 4 2.boot the upgraded opensuse 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.