https://bugzilla.novell.com/show_bug.cgi?id=660420 https://bugzilla.novell.com/show_bug.cgi?id=660420#c1 Joerg Reuter <jreuter@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WONTFIX --- Comment #1 from Joerg Reuter <jreuter@novell.com> 2011-04-02 18:57:18 UTC --- Sorry for the late reply, it took a while to test it myself. I have no GPS reception in the office, and only very poor reception at home... And while I actually own such a device, I've been running it in data logger mode only so far. The Holux m-241 needs "gpsd" started with the "-b" ("broken device") mode, and only works after setting the baudrate to the correct value: stty 38400 </dev/ttyUSB0 gpsd -b /dev/ttyUSB0 Trying to access the device with a different baudrate than 38400 requires it being unplugged before attempting again (at least with the firmware version on my device). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.