http://bugzilla.novell.com/show_bug.cgi?id=601543 http://bugzilla.novell.com/show_bug.cgi?id=601543#c8 --- Comment #8 from Mario Guzman <mario_bz@mgtech.com> 2010-05-25 17:28:35 UTC --- The boot and yast logs are not there and here is the command you wanted, keep in mind it was done on 11.2 but I assume you just want to see the card info. linux112:/home/mario # hwinfo --gfxcard 25: PCI 500.0: 0300 VGA compatible controller (VGA) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_10de_295 Unique ID: Ddhb.d6lyQT5hTz3 Parent ID: vSkL.k6YHya1epLD SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:05:00.0 SysFS BusID: 0000:05:00.0 Hardware Class: graphics card Model: "ASUSTeK GeForce 7950 GT" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0295 "G71 [GeForce 7950 GT]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8225 "GeForce 7950 GT" Revision: 0xa1 Driver: "nvidia" Driver Modules: "nvidia" Memory Range: 0xef000000-0xefffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable) Memory Range: 0xee000000-0xeeffffff (rw,non-prefetchable) I/O Ports: 0xec00-0xec7f (rw) Memory Range: 0xedfe0000-0xedffffff (ro,prefetchable,disabled) IRQ: 16 (50984 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000295sv00001043sd00008225bc03sc00i00" Driver Info #0: Driver Status: nvidiafb is not active Driver Activation Cmd: "modprobe nvidiafb" Driver Info #1: Driver Status: nvidia is active Driver Activation Cmd: "modprobe nvidia" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) Primary display adapter: #25 linux112:/home/mario # -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.