https://bugzilla.novell.com/show_bug.cgi?id=337003#c14 --- Comment #14 from Bernard Delley <bernard.delley@psi.ch> 2007-11-16 02:35:59 MST --- Created an attachment (id=183654) --> (https://bugzilla.novell.com/attachment.cgi?id=183654) lspci out for identifying network chips I replaced the rtl8139 by an intel pro1000GT (PWLA8391GTBLK) pci card after setup by yast (+reboot) this eth2 works reliably (1h experience) this older intel Gb/s chip does 630Mb/s which is about half of the expected for more current onboard chips. trying e1000e for the onboard chip. rmmod e1000 modprobe e1000e yast knows neither of the ethernet controllers, so modprobe e1000 yast, specify hardware e1000e rmmod e1000 double check with lsmod : no e1000 is listed, just e1000e this gives ethernet connection. But, its unreliable again, maybe slightly better than with e1000 for now, the system is used with the intel pci card. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.