[Bug 205509] Suspend to disk error (on SUSE 10.0 was working)

https://bugzilla.novell.com/show_bug.cgi?id=205509 ------- Comment #10 from fazerxlo@o2.pl 2006-10-15 04:46 MST ------- here is my dmesg meybe this can help Linux version 2.6.18-rc5-git6-2-default (geeko@buildhost) (gcc version 4.1.2 20060829 (prerelease) (SUSE Linux)) #1 SMP Fri Sep 1 22:19:04 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001deb0000 (usable) BIOS-e820: 000000001deb0000 - 000000001deb8000 (ACPI data) BIOS-e820: 000000001deb8000 - 000000001df00000 (ACPI NVS) BIOS-e820: 000000001df00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 478MB LOWMEM available. found SMP MP-table at 000f64d0 On node 0 totalpages: 122544 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 118448 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 PTLTD ) @ 0x000f64a0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1deb3c1c ACPI: FADT (v001 VN800 FIC_LM7R 0x06040000 PTL_ 0x000f4240) @ 0x1deb7eec ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1deb7f60 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1deb7fb0 ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1deb3d91 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1deb3c54 ACPI: DSDT (v001 FIC LM7R 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dffe0000) Detected 1507.675 MHz processor. Built 1 zonelists. Total pages: 122544 Kernel command line: root=/dev/sda5 vga=791 resume=/dev/sda7 splash=silent pci=usepirqmask irqpoll showopts bootsplash: silent mode. Misrouted IRQ fixup and polling support enabled This may significantly impact system performance mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 479464k/490176k available (1737k kernel code, 10120k reserved, 696k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3027.48 BogoMIPS (lpj=6054974) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 2487k freed ACPI: Core revision 20060707 not found! CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 Total of 1 processors activated (3027.48 BogoMIPS). ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1 .MP-BIOS bug: 8254 timer not connected to IO-APIC ..trying to set up timer (IRQ0) through the 8259A ... failed. ..trying to set up timer as Virtual Wire IRQ... works. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *8 ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d1000000-d1ffffff PREFETCH window: f0000000-f3ffffff PCI: Bus 2, cardbus bridge: 0000:00:0c.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:0c.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Machine check exception polling timer started. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1160914962.876:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Bypassing VIA 8237 APIC De-Assert Message vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 6144k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: protected mode interface info at c000:aa85 vesafb: pmi: set display start = c00caad3, set palette = c00cab44 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 62426 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 196k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (49 C) libata version 2.00 loaded. sata_via 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 185 sata_via 0000:00:0f.0: routed to hard irq line 9 sata_via 0000:00:0f.0: enabling SATA channels (0x32) ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1426 bmdma 0x1400 irq 185 ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1422 bmdma 0x1408 irq 185 scsi0 : sata_via Time: acpi_pm clocksource has been installed. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) input: AT Translated Set 2 keyboard as /class/input/input1 ata1.00: ATA-7, max UDMA7, 78140160 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_via ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x142F Vendor: ATA Model: SAMSUNG HM040HI Rev: YA10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<6>input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 185 PCI: VIA IRQ fixup for 0000:00:0f.1, from 0 to 9 sd 0:0:0:0: Attached scsi generic sg0 type 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide1: BM-DMA at 0x1418-0x141f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide1... hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... ACPI: Fan [FAN] (on) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume input: PS/2 Mouse as /class/input/input4 input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode reiserfs: using flush barriers ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names lp: driver loaded but no devices found hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: Initialized config rom entry `ip1394' usbcore: registered new driver usbfs via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193 eth0: VIA Rhine II at 0x12000, 00:40:ca:da:a6:a0, IRQ 193. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. PCI: Enabling device 0000:00:0c.2 (0010 -> 0012) ACPI: PCI Interrupt 0000:00:0c.2[C] -> GSI 18 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:0c.2 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[d0002000-d00027ff] Max Packet=[2048] IR/IT contexts=[4/8] Yenta: CardBus bridge found at 0000:00:0c.0 [1734:109b] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0c.0, mfunc 0x01ac1b22, devctl 0x64 usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ieee80211_crypt: module not supported by Novell, setting U taint flag. ieee80211_crypt: registered algorithm 'NULL' Linux agpgart interface v0.101 (c) Dave Jones Yenta: ISA IRQ mask 0x0cf8, PCI irq 177 Socket status: 30000006 ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 1 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 209, io mem 0xd0002800 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18-rc5-git6-2-default ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ieee80211: module not supported by Novell, setting U taint flag. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ieee80211softmac: module not supported by Novell, setting U taint flag. ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 209, io base 0x00001440 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18-rc5-git6-2-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 209, io base 0x00001460 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18-rc5-git6-2-default uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected agpgart: Detected VIA P4M800CE chipset agpgart: AGP aperture is 256M @ 0xe0000000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 PCI: Enabling device 0000:00:11.5 (0000 -> 0001) ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:11.5 to 64 bcm43xx: module not supported by Novell, setting U taint flag. bcm43xx driver usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: new device found, idVendor=04b4, idProduct=0033 usb 2-2: new device strings: Mfr=2, Product=1, SerialNumber=0 usb 2-2: Product: USB Scroll Mouse usb 2-2: Manufacturer: ARESON usb 2-2: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040ca0134101cd4] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 201 bcm43xx: Chip ID 0x4318, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) bcm43xx: Radio turned off bcm43xx: Radio turned off usbcore: registered new driver hiddev input: ARESON USB Scroll Mouse as /class/input/input6 input: USB HID v1.10 Mouse [ARESON USB Scroll Mouse] on usb-0000:00:10.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Adding 1317288k swap on /dev/sda7. Priority:-1 extents:1 across:1317288k device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com loop: loaded (max 8 devices) ReiserFS: sda6: found reiserfs format "3.6" with standard journal ReiserFS: sda6: using ordered data mode reiserfs: using flush barriers ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1160914986.406:2): AppArmor (version 2.0-19.43r6320) initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (3829 buckets, 30632 max) - 228 bytes per conntrack ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Lid Switch [LID] audit(1160907795.427:3): audit_pid=2823 old=0 by auid=4294967295 IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com> bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. powernow: This module only works with AMD K7 CPUs bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 17 bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.