Re: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

newer
RE: [suse-autoinstall] Automatic...

Durk S.

30 Sep 2004 30 Sep '04

12:13

Hi there, I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install. The last lines of y2log: 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help ) I hope there's a solution. Durk

...

Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

Show replies by thread

Durk S.

30 Sep 30 Sep

14:12

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Addition: I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source. The structure of the source looks like this: sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt I'm still figuring out this issue. Durk

...

Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

Andreas Vetter

19:23

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi! Your source should look a bit different.

...

From /usr/share/doc/packages/yast2-instserver/network-install.pdf:

...

Addition:

I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source.

The structure of the source looks like this:

sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt

I'm still figuring out this issue.

Durk

...
Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- Andreas Vetter Universitaet Wuerzburg, Theoretische Physik 1 Am Hubland, 97074 Wuerzburg, Deutschland / Germany

Durk S.

1 Oct 1 Oct

07:09

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hey thanks! I've already found that PDF file, but this saves me a bit reading! ;-) Let's see if I can make a working network install this time. :-) Durk

...

Hi!

Your source should look a bit different.

From /usr/share/doc/packages/yast2-instserver/network-install.pdf:

LINUX Enterprise Server 9 CD1 = SLES CD1

LINUX Enterprise Server 9 CD2 = CORE CD1 LINUX Enterprise Server 9 CD3 = CORE CD2 LINUX Enterprise Server 9 CD4 = CORE CD3 LINUX Enterprise Server 9 CD5 = CORE CD4 LINUX Enterprise Server 9 CD6 = CORE CD5

. |-- sles9-i386 | |-- CD1 | |-- boot | |-- docu | |-- media.1 | |-- suse | `-- yast |-- core9-i386 | |-- CD1 | |-- CD2 | `-- CD3 |-- boot -> sles9-i386/CD1/boot |-- media.1 -> sles9-i386/CD1/media.1 |-- content -> sles9-i386/CD1/content |-- control.xml -> sles9-i386/CD1/control.xml `-- yast SLES9 Network Install

You have to set up a multisource installation as described in the PDF.

Best regards, Andreas

On Thu, 30 Sep 2004, Durk S. wrote:

...
Addition:

I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source.

The structure of the source looks like this:

sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt

I'm still figuring out this issue.

Durk

...
Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- Andreas Vetter Universitaet Wuerzburg, Theoretische Physik 1 Am Hubland, 97074 Wuerzburg, Deutschland / Germany

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

Aaron McSorley

16:12

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Is this network-install.pdf located online somewhere? I dont have SLES9 installed yet because it is not working, and I dont think I should have to install a SUSE package on my Debian system just to get this document. -Aaron On Fri, 1 Oct 2004, Durk S. wrote:

...

Hey thanks!

I've already found that PDF file, but this saves me a bit reading! ;-)

Let's see if I can make a working network install this time. :-)

Durk

...
Hi!

Your source should look a bit different.

From /usr/share/doc/packages/yast2-instserver/network-install.pdf:

LINUX Enterprise Server 9 CD1 = SLES CD1

LINUX Enterprise Server 9 CD2 = CORE CD1 LINUX Enterprise Server 9 CD3 = CORE CD2 LINUX Enterprise Server 9 CD4 = CORE CD3 LINUX Enterprise Server 9 CD5 = CORE CD4 LINUX Enterprise Server 9 CD6 = CORE CD5

. |-- sles9-i386 | |-- CD1 | |-- boot | |-- docu | |-- media.1 | |-- suse | `-- yast |-- core9-i386 | |-- CD1 | |-- CD2 | `-- CD3 |-- boot -> sles9-i386/CD1/boot |-- media.1 -> sles9-i386/CD1/media.1 |-- content -> sles9-i386/CD1/content |-- control.xml -> sles9-i386/CD1/control.xml `-- yast SLES9 Network Install

You have to set up a multisource installation as described in the PDF.

Best regards, Andreas

On Thu, 30 Sep 2004, Durk S. wrote:

...
Addition:

I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source.

The structure of the source looks like this:

sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt

I'm still figuring out this issue.

Durk

...
Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- Andreas Vetter Universitaet Wuerzburg, Theoretische Physik 1 Am Hubland, 97074 Wuerzburg, Deutschland / Germany

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

Anas Nashif

2 Oct 2 Oct

03:37

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

http://www.novell.com/documentation/sles9/index.html Aaron McSorley wrote:

...

Is this network-install.pdf located online somewhere? I dont have SLES9 installed yet because it is not working, and I dont think I should have to install a SUSE package on my Debian system just to get this document.

-Aaron

On Fri, 1 Oct 2004, Durk S. wrote:

...
Hey thanks!

I've already found that PDF file, but this saves me a bit reading! ;-)

Let's see if I can make a working network install this time. :-)

Durk

...
Hi!

Your source should look a bit different.

From /usr/share/doc/packages/yast2-instserver/network-install.pdf:

LINUX Enterprise Server 9 CD1 = SLES CD1

LINUX Enterprise Server 9 CD2 = CORE CD1 LINUX Enterprise Server 9 CD3 = CORE CD2 LINUX Enterprise Server 9 CD4 = CORE CD3 LINUX Enterprise Server 9 CD5 = CORE CD4 LINUX Enterprise Server 9 CD6 = CORE CD5

. |-- sles9-i386 | |-- CD1 | |-- boot | |-- docu | |-- media.1 | |-- suse | `-- yast |-- core9-i386 | |-- CD1 | |-- CD2 | `-- CD3 |-- boot -> sles9-i386/CD1/boot |-- media.1 -> sles9-i386/CD1/media.1 |-- content -> sles9-i386/CD1/content |-- control.xml -> sles9-i386/CD1/control.xml `-- yast SLES9 Network Install

You have to set up a multisource installation as described in the PDF.

Best regards, Andreas

On Thu, 30 Sep 2004, Durk S. wrote:

...
Addition:

I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source.

The structure of the source looks like this:

sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt

I'm still figuring out this issue.

Durk

...
Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- Andreas Vetter Universitaet Wuerzburg, Theoretische Physik 1 Am Hubland, 97074 Wuerzburg, Deutschland / Germany

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

Durk S.

4 Oct 4 Oct

09:31

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Okay peeps, as I already concluded earlier, my installation source wasn't completely okay. After some corrections, the AutoYaST install went like it should. Durk

...

Hey thanks!

I've already found that PDF file, but this saves me a bit reading! ;-)

Let's see if I can make a working network install this time. :-)

Durk

...
Hi!

Your source should look a bit different.

From /usr/share/doc/packages/yast2-instserver/network-install.pdf:

LINUX Enterprise Server 9 CD1 = SLES CD1

LINUX Enterprise Server 9 CD2 = CORE CD1 LINUX Enterprise Server 9 CD3 = CORE CD2 LINUX Enterprise Server 9 CD4 = CORE CD3 LINUX Enterprise Server 9 CD5 = CORE CD4 LINUX Enterprise Server 9 CD6 = CORE CD5

. |-- sles9-i386 | |-- CD1 | |-- boot | |-- docu | |-- media.1 | |-- suse | `-- yast |-- core9-i386 | |-- CD1 | |-- CD2 | `-- CD3 |-- boot -> sles9-i386/CD1/boot |-- media.1 -> sles9-i386/CD1/media.1 |-- content -> sles9-i386/CD1/content |-- control.xml -> sles9-i386/CD1/control.xml `-- yast SLES9 Network Install

You have to set up a multisource installation as described in the PDF.

Best regards, Andreas

On Thu, 30 Sep 2004, Durk S. wrote:

...
Addition:

I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source.

The structure of the source looks like this:

sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt

I'm still figuring out this issue.

Durk

...
Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- Andreas Vetter Universitaet Wuerzburg, Theoretische Physik 1 Am Hubland, 97074 Wuerzburg, Deutschland / Germany

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

Aaron McSorley

5 Oct 5 Oct

16:55

New subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

I just cant get my network install to see the core distribution files. It installs the SLES Admin guide then goes to "Finishing Basic Installation" and hangs at "Creating initrd..." I've followed http://yast2.suse.com/multiplesource/multiplesource.pdf as closely as possible. Here is my directory ls -ld * lrwxrwxrwx 1 root root 22 Oct 5 11:03 boot -> sles9-x86_64/CD1/boot/ lrwxrwxrwx 1 root root 24 Oct 5 11:03 content -> sles9-x86_64/CD1/content lrwxrwxrwx 1 root root 28 Oct 5 11:04 control.xml -> sles9-x86_64/CD1/control.xml drwxr-xr-x 6 root root 4096 Oct 5 11:03 core9-x86_64 lrwxrwxrwx 1 root root 25 Oct 5 11:04 media.1 -> sles9-x86_64/CD1/media.1/ drwxr-xr-x 3 root root 4096 Oct 5 11:03 sles9-x86_64 drwxr-xr-x 2 root root 4096 Oct 5 11:27 yast ls core9-x86_64/ sles9-x86_64/ yast/ core9-x86_64/: CD1 CD2 CD3 CD4 sles9-x86_64/: CD1 yast/: instorder order cat yast/order /sles9-x86_64/CD1 /sles9-x86_64/CD1 /core9-x86_64/CD1 /core9-x86_64/CD1 cat yast/instorder /sles9-x86_64/CD1 /core9-x86_64/CD1 I can attach my y2log if anyone wants to see it. Thanks for any help Aaron On Mon, 4 Oct 2004, Durk S. wrote:

...

Okay peeps, as I already concluded earlier, my installation source wasn't completely okay. After some corrections, the AutoYaST install went like it should.

Durk

...
Hey thanks!

I've already found that PDF file, but this saves me a bit reading! ;-)

Let's see if I can make a working network install this time. :-)

Durk

...
Hi!

Your source should look a bit different.

From /usr/share/doc/packages/yast2-instserver/network-install.pdf:

LINUX Enterprise Server 9 CD1 = SLES CD1

LINUX Enterprise Server 9 CD2 = CORE CD1 LINUX Enterprise Server 9 CD3 = CORE CD2 LINUX Enterprise Server 9 CD4 = CORE CD3 LINUX Enterprise Server 9 CD5 = CORE CD4 LINUX Enterprise Server 9 CD6 = CORE CD5

. |-- sles9-i386 | |-- CD1 | |-- boot | |-- docu | |-- media.1 | |-- suse | `-- yast |-- core9-i386 | |-- CD1 | |-- CD2 | `-- CD3 |-- boot -> sles9-i386/CD1/boot |-- media.1 -> sles9-i386/CD1/media.1 |-- content -> sles9-i386/CD1/content |-- control.xml -> sles9-i386/CD1/control.xml `-- yast SLES9 Network Install

You have to set up a multisource installation as described in the PDF.

Best regards, Andreas

On Thu, 30 Sep 2004, Durk S. wrote:

...
Addition:

I did a test with a floppy (for the profile) and SLES 9 CDs (as installation source)... This actually works! So there must be something wrong with my NFS installation source... or configuration to find that source.

The structure of the source looks like this:

sles9 sles9/boot sles9/boot/root sles9/boot/directory.yast sles9/boot/README sles9/boot/modules1 sles9/boot/modules2 sles9/boot/modules3 sles9/boot/modules4 sles9/boot/modules5 sles9/boot/LIESMICH sles9/boot/rescuefloppy sles9/boot/loader sles9/boot/loader/linux sles9/boot/loader/10240768.spl sles9/boot/loader/06400480.spl sles9/boot/loader/memtest sles9/boot/loader/message sles9/boot/loader/12801024.spl sles9/boot/loader/isolinux.bin sles9/boot/loader/isolinux.cfg sles9/boot/loader/initrd sles9/boot/loader/16001200.spl sles9/boot/loader/14001050.spl sles9/boot/loader/bootlogo sles9/boot/loader/08000600.spl sles9/boot/README.DOS sles9/boot/rescue sles9/boot/LIESMICH.DOS sles9/boot/bootdsk1 sles9/boot/bootdsk2 sles9/boot/bootdsk3 sles9/boot/modules1.txt sles9/boot/modules2.txt sles9/boot/modules3.txt sles9/boot/modules4.txt sles9/boot/modules5.txt sles9/sles9-i386/CD1/... (contents of SLES 9 CD 1) sles9/sles9-i386/CD2/... (contents of SLES 9 CD 2) sles9/sles9-i386/CD3/... (contents of SLES 9 CD 3) sles9/sles9-i386/CD4/... (contents of SLES 9 CD 4) sles9/sles9-i386/CD5/... (contents of SLES 9 CD 5) sles9/sles9-i386/CD6/... (contents of SLES 9 CD 6) sles9/yast sles9/yast/order sles9/yast/instorder sles9/content sles9/media.1 sles9/media.1/directory.yast sles9/media.1/media sles9/media.1/products sles9/media.1/info.txt

I'm still figuring out this issue.

Durk

...
Hi there,

I've got exactly the same problem with a HP DL360 G3 using a network AutoYaST2 install.

The last lines of y2log:

2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":`ext2, "device":"/dev/cciss/c 0d0p7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[516, 16917], "type":`logical, "used_fs":`ext2, "uuid":"7f ca98f4-1cf7-4862-81c0-93866245ea3d"] dev=$["disk":"/dev/cciss/c0d0", "nr":7] 2004-09-30 13:57:50 <1> linux(697) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-30 13:57:50 <1> linux(697) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":" 0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-30 13:57:50 <1> linux(697) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-30 13:57:50 <3> linux(697) [libscr] Bootloader.ycp:361 No SCR instance found 2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["cciss"] 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:294 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:296 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:313 No SCR instance found2004-09-30 13:57:50 <1> linux(697) [YCP] Initrd.ycp:316 Writing modules cciss 2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:317 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:318 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:323 No SCR instance found2004-09-30 13:57:50 <3> linux(697) [libscr] Initrd.ycp:326 No SCR instance found2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(createRichText):857 Invalid arguments for the Label RichText: `RichText (`opt (`plainText), nil) 2004-09-30 13:57:50 <3> linux(736) [ui] YUI_widgets.cc(widgetWithId):2426 No widget with `id( `ok_help ) 2004-09-30 13:57:50 <3> linux(736) [libycp] Initrd.ycp:254 No widget with `id( `ok_help )

I hope there's a solution.

Durk

...
Date: Wed, 29 Sep 2004 10:01:15 +0200 Message-ID: From: Subject: [suse-autoinstall] SLES9 autoinstall hangs at creating initrd

Hi,

I've run into a problem when doing an autoinstall (SLES9) from a CD that I created using the YaST2 tools. Everything runs smooth up to the point where it is "Creating initrd...", at this point the installation just hangs. I'm trying to install on an HP DL380 G3 with the cciss hardware raid driver. Anyone has the same experience?

Regards, Anders

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- Andreas Vetter Universitaet Wuerzburg, Theoretische Physik 1 Am Hubland, 97074 Wuerzburg, Deutschland / Germany

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

7152

Age (days ago)

7157

Last active (days ago)

List overview

Download

7 comments

4 participants

participants (4)

Aaron McSorley
Anas Nashif
Andreas Vetter
Durk S.