Re: [suse-autoinstall] SLES9: Howto bypass 256 chars boot-kernel parameter limit?
some problems whith linefeeds last mail. I don't like this client.
"Jochen Schaefer" <jschaef@novell.com> 01/16 9:48 pm >>> Hi, I don't think you need the ramdisk_size parameter, netdevice parm, BOOT_IMAGE parm, initrd parm. What does SuSE=xxxx? Take a SLES9Type at the prompt: hostip=..., gateway=..., netmask ..., hostip ... autoyast=..., install=... .That should be enough. And with DHCP you don't need the hostip, gateway and netmask. parms. I don't understand your question. The infois AFAIK the autoyastfile and you configured your environment to get it from network: autoyast=nfs://192.168.1.202/nfssrc/profiles/ If you want to read a grub menu.lst over network get the grub bootfrom www.suse.de/~nashif and configure it somethink like this: color white/blue black/lightdefault 0 timeout 8 framebuffer 1 #gfxmenu (fd0)/boot/message title harddisk root (hd0) chainloader +1 title SUSE grub network disk i386 dhcp ifconfig -configfile (nd)/sles9/i386/grub/menu.lst you have to configure your tftpfor the second entry. And the grubdoesn't work with every networkcard. Jochen
Hans Kamm <hans753@hotmail.com> 01/16 8:56 pm >>> Hi,
I want to install SLES9 using autoyast. Inserting a CD to get the bootloader and then I want to install via network (autoinst.xml and CDs on NFS). The kernelparameter has a limitation of 256 chars, I' ve tried to reduce the size and get still a length of 250 chars, see below: BOOT_IMAGE=linux SuSE=,1203200100,EC360BE5., initrd=initrd ramdisk_size=65536 textmode=1 splash=silent netdevice=eth0 hostip=192.168.1.201/24 gateway=192.168.1.1 autoyast=nfs://192.168.1.202/nfssrc/profiles/ install=nfs://192.168.1.202/nfssrc/sles9/ Any ideas how to bypass the liimitations? Is there a way to put a 'info' file somewhere on the network (not on floppy). Greets Hans _________________________________________________________________ Tun Sie Ihrem Rechner 'was Gutes. MSN Hotmail mit McAfee® Anti http://www.msn.de/email/antivirus/ Jetzt kostenlos anmelden! -- To unsubscribe, esuse For additional commands, esuse
Hi, I will not be able to use DHCP or not in all cases. I havent set these commands "BOOT_IMAGE=linux SuSE=,1203200100,EC360BE5., initrd=initrd ramdisk_size=65536 textmode=1 splash=silent", these are the defaults of the CD-bootloader? I see these parameters after hitting "Installation", for a short time you can see all kernel command line parameters. No way to change them. => Only about 180 chars for my commands which are not enough in all cases. I' ll lookout for a workaround. -- Hans
From: "Jochen Schaefer" <jschaef@novell.com> To: <hans753@hotmail.com>, "Jochen Schaefer" <jschaef@novell.com>,<suse-autoinstall@suse.com> Subject: Re: [suse-autoinstall] SLES9: Howto bypass 256 charsboot-kernel parameter limit? Date: Sun, 16 Jan 2005 21:53:44 +0100
some problems whith linefeeds last mail. I don't like this client.
"Jochen Schaefer" <jschaef@novell.com> 01/16 9:48 pm >>> Hi, I don't think you need the ramdisk_size parameter, netdevice parm, BOOT_IMAGE parm, initrd parm. What does SuSE=xxxx? Take a SLES9Type at the prompt: hostip=..., gateway=..., netmask ..., hostip ... autoyast=..., install=... .That should be enough. And with DHCP you don't need the hostip, gateway and netmask. parms. I don't understand your question. The infois AFAIK the autoyastfile and you configured your environment to get it from network: autoyast=nfs://192.168.1.202/nfssrc/profiles/ If you want to read a grub menu.lst over network get the grub bootfrom www.suse.de/~nashif and configure it somethink like this: color white/blue black/lightdefault 0 timeout 8 framebuffer 1 #gfxmenu (fd0)/boot/message title harddisk root (hd0) chainloader +1 title SUSE grub network disk i386 dhcp ifconfig -configfile (nd)/sles9/i386/grub/menu.lst you have to configure your tftpfor the second entry. And the grubdoesn't work with every networkcard. Jochen
Hans Kamm <hans753@hotmail.com> 01/16 8:56 pm >>> Hi,
I want to install SLES9 using autoyast. Inserting a CD to get the bootloader and then I want to install via network (autoinst.xml and CDs on NFS). The kernelparameter has a limitation of 256 chars, I' ve tried to reduce the size and get still a length of 250 chars, see below: BOOT_IMAGE=linux SuSE=,1203200100,EC360BE5., initrd=initrd ramdisk_size=65536 textmode=1 splash=silent netdevice=eth0 hostip=192.168.1.201/24 gateway=192.168.1.1 autoyast=nfs://192.168.1.202/nfssrc/profiles/ install=nfs://192.168.1.202/nfssrc/sles9/
Any ideas how to bypass the liimitations? Is there a way to put a 'info' file somewhere on the network (not on floppy).
Greets Hans
_________________________________________________________________ Tun Sie Ihrem Rechner 'was Gutes. MSN Hotmail mit McAfee® Anti http://www.msn.de/email/antivirus/ Jetzt kostenlos anmelden!
-- To unsubscribe, esuse For additional commands, esuse
-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com
_________________________________________________________________ So einfach geht das. MSN Toolbar mit Pop-up-Blocker. http://toolbar.msn.de/ Jetzt kostenlos downloaden und gut ist!
participants (2)
-
Hans Kamm -
Jochen Schaefer