Where is this 169.254.0.0/16 network coming from when I build a system
via autoinstall? I don't have it defined in my config file, but it
magically appears whenever I use autoinstall to build a SLES9 machine.
I don't have this problem using autoinstall and SLES8.
Also, would this phantom network have something to do with my gateway
not working when the machine comes up? I have the gateway defined in
the config file, but it never seems to make it over to the system at the
end of the install.
Here's a netstat from a freshly built machine:
teeth:~ # netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
10.150.1.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
lo
Here's the network portion of the config file:
<networking>
<dns>
This is Zeroconf, it is configured by default and has nothing to do with your autoyast configuration. http://en.wikipedia.org/wiki/Zeroconf Anas Jon Thorson wrote:
Where is this 169.254.0.0/16 network coming from when I build a system via autoinstall? I don't have it defined in my config file, but it magically appears whenever I use autoinstall to build a SLES9 machine. I don't have this problem using autoinstall and SLES8.
Also, would this phantom network have something to do with my gateway not working when the machine comes up? I have the gateway defined in the config file, but it never seems to make it over to the system at the end of the install.
Here's a netstat from a freshly built machine:
teeth:~ # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.150.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
Here's the network portion of the config file:
<networking> <dns>
false false <domain>srttel.com</domain> <hostname>teeth</hostname> <nameservers config:type="list"> <nameserver>10.150.1.3</nameserver> </nameservers> <searchlist config:type="list"> <search>srttel.com</search> <search>srtnet.com</search> <search>ndak.net</search> <search>minot.com</search> </searchlist> </dns> <interfaces config:type="list"> <interface> <bootproto>static</bootproto> <broadcast>10.150.1.255</broadcast> <device>eth0</device> <ipaddr>10.150.1.111</ipaddr> <netmask>255.255.255.0</netmask> <network>10.150.1.0</network> <startmode>onboot</startmode> </interface> </interfaces> <modules config:type="list"><device>eth0</device> </modules> <routing config:type="list"> <route> <destination>default</destination> <device>eth0</device> <gateway>10.150.1.1</gateway> <netmask>255.255.255.0</netmask> </route>false </routing> </networking>Is there a way to keep this network from appearing? Is this network the reason why my gateway doesn't show up? I could put something in the post-install to clean this mess up, but that seems like a hack. Surely there is an elegant way to fix this.
Thanks.
-j
Ok, so I'll live with that network existing. Any idea as to why my default route isn't being configured? Thanks. -j On Wed, 2005-01-05 at 15:32 -0500, Anas Nashif wrote:
This is Zeroconf, it is configured by default and has nothing to do with your autoyast configuration.
http://en.wikipedia.org/wiki/Zeroconf
Anas
Jon Thorson wrote:
Where is this 169.254.0.0/16 network coming from when I build a system via autoinstall? I don't have it defined in my config file, but it magically appears whenever I use autoinstall to build a SLES9 machine. I don't have this problem using autoinstall and SLES8.
Also, would this phantom network have something to do with my gateway not working when the machine comes up? I have the gateway defined in the config file, but it never seems to make it over to the system at the end of the install.
Here's a netstat from a freshly built machine:
teeth:~ # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.150.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
Here's the network portion of the config file:
<networking> <dns>
false false <domain>srttel.com</domain> <hostname>teeth</hostname> <nameservers config:type="list"> <nameserver>10.150.1.3</nameserver> </nameservers> <searchlist config:type="list"> <search>srttel.com</search> <search>srtnet.com</search> <search>ndak.net</search> <search>minot.com</search> </searchlist> </dns> <interfaces config:type="list"> <interface> <bootproto>static</bootproto> <broadcast>10.150.1.255</broadcast> <device>eth0</device> <ipaddr>10.150.1.111</ipaddr> <netmask>255.255.255.0</netmask> <network>10.150.1.0</network> <startmode>onboot</startmode> </interface> </interfaces> <modules config:type="list"><device>eth0</device> </modules> <routing config:type="list"> <route> <destination>default</destination> <device>eth0</device> <gateway>10.150.1.1</gateway> <netmask>255.255.255.0</netmask> </route>false </routing> </networking>Is there a way to keep this network from appearing? Is this network the reason why my gateway doesn't show up? I could put something in the post-install to clean this mess up, but that seems like a hack. Surely there is an elegant way to fix this.
Thanks.
-j
On Wed, Jan 05, 2005 at 03:15:46PM -0600, Jon Thorson wrote: Hi,
Jon Thorson wrote:
Where is this 169.254.0.0/16 network coming from when I build a system via autoinstall? I don't have it defined in my config file, but it magically appears whenever I use autoinstall to build a SLES9 machine. I don't have this problem using autoinstall and SLES8.
<offtopic> Change the Variable LINKLOCAL_INTERFACES in /etc/sysconfig/network/config. The Script, which is used here, is /etc/sysconfig/network/scripts/ifup-route. </offtopic> frank -- /usr/sbin/thinkd: killed by signal 14, rebooting ERROR: unknown file format: /var/brain/memory thinkd aborted. no brain services available
On Wed, Jan 05, 2005 at 03:15:46PM -0600, Jon Thorson wrote:
Ok, so I'll live with that network existing. Any idea as to why my default route isn't being configured?
Here's the network portion of the config file:
<networking> ... <routing config:type="list"> <route> <destination>default</destination> <device>eth0</device> <gateway>10.150.1.1</gateway> <netmask>255.255.255.0</netmask> </route>
false </routing> </networking>
Well, look at the docs:
http://www.suse.de/~nashif/autoinstall/9.1/html/CreateProfile.Network.html#C...
<routing>
participants (4)
-
Anas Nashif
-
Frank Hollmann
-
Jon Thorson
-
Martin Vidner