hi, i have a problem with a few workstations over here. The workstations have Nvidia Quadro FX 540 graphix cards, and Dell 1905FP LCD Displays. I setup everything in my autoyast installation. Here is how: <color_depth config:type="integer">16</color_depth> <configure_x11 config:type="boolean">true</configure_x11> <display_manager>kdm</display_manager> <enable_3d config:type="boolean">true</enable_3d> <monitor> <display> <frequency config:type="integer">60</frequency> <height config:type="integer">1024</height> <max_hsync config:type="integer">82</max_hsync> <max_vsync config:type="integer">62</max_vsync> <min_hsync config:type="integer">31</min_hsync> <min_vsync config:type="integer">58</min_vsync> <width config:type="integer">1280</width> </display> <monitor_device>1280X1024@60HZ</monitor_device> <monitor_vendor>--> LCD</monitor_vendor> </monitor> <resolution>1280x1024</resolution> <window_manager>kde</window_manager> </x11> If i use a Analog Cable VGA Cable everything works ok. The workstation comes up with 1280x1024, but if i use a Digital DVI Cable, it comes up with 1024x768. I can do what i want it doesnt work. Any suggestions or tips? mfg Florian Zuegner Junior Network Assistance Honda Research Institute Europe GmbH