[Fwd: Re: [suse-autoinstall] Additional rpm packages are not found on media? (error 11283)]
Hard to believe, but it works! Thanks Jan. However, it would be really helpful to know, why it has to be i586 and not "noarch". Furthermore, I'd like to specify my own subdirs, like "uni" or something similar ... isn't that possible? Stephan A. Rickauer ---------------------------- Institut für Neuroinformatik IT-Koordinator Universität / ETH Zürich Winterthurerstr. 190 CH-8057 Zürich Tel: +41 1 635 30 50 Sek: +41 1 635 30 52 Fax: +41 1 635 30 53 http://www.ini.unizh.ch ------------------------ Jan-Marc Pilawa wrote:
Schon probiert die rpms in i586 abzulegen? Meine habe ich dort angelegt und genau das getan, was in der Mail beschrieben stand.
Mit freundlichen Gruessen / Sincerely
Jan Pilawa
-------- Original Message -------- Subject: Re: [suse-autoinstall] Additional rpm packages are not found on media? (error 11283) Date: Thu, 8 Jul 2004 14:22:12 +0200 From: Jan-Marc Pilawa <j.pilawa@tu-bs.de> Organization: Rechenzentrum To: Stephan A. Rickauer References: <40ED38D7.7020101@ini.phys.ethz.ch> Schon probiert die rpms in i586 abzulegen? Meine habe ich dort angelegt und genau das getan, was in der Mail beschrieben stand. Mit freundlichen Gruessen / Sincerely Jan Pilawa -- + Kontakt ----------------------------------------------------+ + Systembetreuung Rechenzentrum TU Braunschweig + + Hans-Sommer-Str. 65, D-38092 Braunschweig + + Tel: +49 531 391-5548 E-Mail: j.pilawa@tu-bs.de ____________+
maybe cause apt and apt-libs are not noarch? Anas Stephan A. Rickauer wrote:
Hard to believe, but it works! Thanks Jan. However, it would be really helpful to know, why it has to be i586 and not "noarch". Furthermore, I'd like to specify my own subdirs, like "uni" or something similar ... isn't that possible?
Stephan A. Rickauer
---------------------------- Institut für Neuroinformatik IT-Koordinator
Universität / ETH Zürich Winterthurerstr. 190 CH-8057 Zürich
Tel: +41 1 635 30 50 Sek: +41 1 635 30 52 Fax: +41 1 635 30 53
http://www.ini.unizh.ch ------------------------
Jan-Marc Pilawa wrote:
Schon probiert die rpms in i586 abzulegen? Meine habe ich dort angelegt und genau das getan, was in der Mail beschrieben stand.
Mit freundlichen Gruessen / Sincerely
Jan Pilawa
-------- Original Message -------- Subject: Re: [suse-autoinstall] Additional rpm packages are not found on media? (error 11283) Date: Thu, 8 Jul 2004 14:22:12 +0200 From: Jan-Marc Pilawa <j.pilawa@tu-bs.de> Organization: Rechenzentrum To: Stephan A. Rickauer References: <40ED38D7.7020101@ini.phys.ethz.ch>
Schon probiert die rpms in i586 abzulegen? Meine habe ich dort angelegt und genau das getan, was in der Mail beschrieben stand.
Mit freundlichen Gruessen / Sincerely
Jan Pilawa
Hi, I has been trying to install a ppc64 Squadron partition using autoyast. I am stuck at the following errors at the" install boot manager" stage with the following error message: Error Occurred while installing yaboot: ERROR:boot=/dev/null is not a valid block device Can someone shed some light on what could cause the error ? The last part of the yast log is as follows. Thanks, Joseph 2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(poolSetInstalled):221 installed objects set! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):351 START 10 Selectables 2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(ClearSaveState):538 SaveState cleared! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):391 END 0 Selectables 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):683 Calling closeDatabase: RpmDb[V4(Xcm)V3(---): '(/mnt)/var/lib/rpm'] 2004-09-29 14:14:17 <1> linux(762) [librpmDb] librpmDb.cc(blockAccess):327 Block access 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):711 closeDatabase: RpmDb[NO_INIT] 2004-09-29 14:14:17 <1> linux(762) [Y2PM] Y2PM.cc(instTargetClose):329 InstTarget down 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1516 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/evms/sda1", "fstype":"EVMS", "id":64, "nr":"sda1", "region":[0, 1], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda2", "fstype":"EVMS", "id":26, "nr":"sda2", "region":[0, 1024], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda3", "fstype":"EVMS", "id":367, "nr":"sda3", "region":[0, 33674], "type":`evms], $["device":"/dev/sda1", "fsid":5, "nr":1, "region":[0, 17357], "type":`extended], $["device":"/dev/sda5", "fs_options":$[], "fsid":65, "fstype":"PPC PReP Boot", "mount":"", "nr":5, "prep_install":true, "region":[0, 8], "type":`logical, "used_fs":nil], $["device":"/dev/sda6", "fs_options":$[], "fsid":130, "mount":"swap", "nr":6, "region":[8, 512], "type":`logical], $["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil]] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil] dev=$["disk":"/dev/sda", "nr":7] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-29 14:14:17 <1> linux(762) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":"0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-29 14:14:17 <1> linux(762) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["ipr"] 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:316 Writing modules ipr 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:408 Saving configuration files 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/misc.ycp:955 Saving: glob: [$["key":"default", "value":"linux"], $["key":"timeout", "value":100], $["changed":true, "key":"boot", "value":"/dev/null"], $["changed":true, "key":"activate", "value":true]], sec: [[$["key":"image", "value":"/boot/vmlinux"], $["key":"label", "value":"linux"], $["key":"root", "value":"/dev/sda7"], $["changed":true, "key":"append", "value":"selinux=0 elevator=cfq"], $["key":"__intern__", "value":$["auto":true, "changed":false, "devs":["/dev/sda7"], "type":"linux"]]]] 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:451 Calling bootloader executable 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:428 Running command /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:433 Exit code of /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1: 1
Hi, On these systems you need the root partition to be primary. Add <partition_type>primary</partition_type> to your partitions and it should work. Anas Joseph H Zhao wrote:
Hi,
I has been trying to install a ppc64 Squadron partition using autoyast. I am stuck at the following errors at the" install boot manager" stage with the following error message:
Error Occurred while installing yaboot: ERROR:boot=/dev/null is not a valid block device
Can someone shed some light on what could cause the error ? The last part of the yast log is as follows.
Thanks, Joseph
2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(poolSetInstalled):221 installed objects set! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):351 START 10 Selectables 2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(ClearSaveState):538 SaveState cleared! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):391 END 0 Selectables 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):683 Calling closeDatabase: RpmDb[V4(Xcm)V3(---): '(/mnt)/var/lib/rpm'] 2004-09-29 14:14:17 <1> linux(762) [librpmDb] librpmDb.cc(blockAccess):327 Block access 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):711 closeDatabase: RpmDb[NO_INIT] 2004-09-29 14:14:17 <1> linux(762) [Y2PM] Y2PM.cc(instTargetClose):329 InstTarget down 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1516 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/evms/sda1", "fstype":"EVMS", "id":64, "nr":"sda1", "region":[0, 1], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda2", "fstype":"EVMS", "id":26, "nr":"sda2", "region":[0, 1024], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda3", "fstype":"EVMS", "id":367, "nr":"sda3", "region":[0, 33674], "type":`evms], $["device":"/dev/sda1", "fsid":5, "nr":1, "region":[0, 17357], "type":`extended], $["device":"/dev/sda5", "fs_options":$[], "fsid":65, "fstype":"PPC PReP Boot", "mount":"", "nr":5, "prep_install":true, "region":[0, 8], "type":`logical, "used_fs":nil], $["device":"/dev/sda6", "fs_options":$[], "fsid":130, "mount":"swap", "nr":6, "region":[8, 512], "type":`logical], $["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil]] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil] dev=$["disk":"/dev/sda", "nr":7] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-29 14:14:17 <1> linux(762) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":"0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-29 14:14:17 <1> linux(762) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["ipr"] 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:316 Writing modules ipr 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:408 Saving configuration files 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/misc.ycp:955 Saving: glob: [$["key":"default", "value":"linux"], $["key":"timeout", "value":100], $["changed":true, "key":"boot", "value":"/dev/null"], $["changed":true, "key":"activate", "value":true]], sec: [[$["key":"image", "value":"/boot/vmlinux"], $["key":"label", "value":"linux"], $["key":"root", "value":"/dev/sda7"], $["changed":true, "key":"append", "value":"selinux=0 elevator=cfq"], $["key":"__intern__", "value":$["auto":true, "changed":false, "devs":["/dev/sda7"], "type":"linux"]]]] 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:451 Calling bootloader executable 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:428 Running command /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:433 Exit code of /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1: 1
Hi,
I has been trying to install a ppc64 Squadron partition using autoyast. I am stuck at the following errors at the" install boot manager" stage with the following error message:
Error Occurred while installing yaboot: ERROR:boot=/dev/null is not a valid block device
Can someone shed some light on what could cause the error ? The last
of the yast log is as follows.
Thanks, Joseph
2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(poolSetInstalled):221 installed objects set! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):351 START 10 Selectables 2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(ClearSaveState):538 SaveState cleared! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):391 END 0 Selectables 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):683 Calling closeDatabase: RpmDb[V4(Xcm)V3(---): '(/mnt)/var/lib/rpm'] 2004-09-29 14:14:17 <1> linux(762) [librpmDb]
Anas, When I using the control file with primary partition type fpr prep, the error message changed to "image=/boot/vmlinux ist not a regular file". When I check the /boot directory, there is no vmlinux file there. Joseph Anas Nashif <nashif@suse.de> To 09/02/2004 01:32 Joseph H PM Zhao/Rochester/Contr/IBM@IBMUS cc suse-autoinstall@suse.com Subject [suse-autoinstall] Re: Error when autoyast install ppc64 partition (Squadron system) Hi, On these systems you need the root partition to be primary. Add <partition_type>primary</partition_type> to your partitions and it should work. Anas Joseph H Zhao wrote: part librpmDb.cc(blockAccess):327
Block access 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):711 closeDatabase: RpmDb[NO_INIT] 2004-09-29 14:14:17 <1> linux(762) [Y2PM] Y2PM.cc(instTargetClose):329 InstTarget down 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1516 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/evms/sda1", "fstype":"EVMS", "id":64, "nr":"sda1", "region":[0, 1], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda2", "fstype":"EVMS", "id":26, "nr":"sda2", "region":[0, 1024], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda3", "fstype":"EVMS", "id":367, "nr":"sda3", "region":[0, 33674], "type":`evms], $["device":"/dev/sda1", "fsid":5, "nr":1, "region":[0, 17357], "type":`extended], $["device":"/dev/sda5", "fs_options":$[], "fsid":65, "fstype":"PPC PReP Boot", "mount":"", "nr":5, "prep_install":true, "region":[0, 8], "type":`logical, "used_fs":nil], $["device":"/dev/sda6", "fs_options":$[], "fsid":130, "mount":"swap", "nr":6, "region":[8, 512], "type":`logical], $["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil]] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1573 CheckForLvmRootFs root=$["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil] dev=$["disk":"/dev/sda", "nr":7] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1576 CheckForLvmRootFs ret=false 2004-09-29 14:14:17 <1> linux(762) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US", "RebootMsg":"0", "Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-29 14:14:17 <1> linux(762) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["ipr"] 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:316 Writing modules ipr 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:408 Saving configuration files 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/misc.ycp:955 Saving: glob: [$["key":"default", "value":"linux"], $["key":"timeout", "value":100], $["changed":true, "key":"boot", "value":"/dev/null"], $["changed":true, "key":"activate", "value":true]], sec: [[$["key":"image", "value":"/boot/vmlinux"], $["key":"label", "value":"linux"], $["key":"root", "value":"/dev/sda7"], $["changed":true, "key":"append", "value":"selinux=0 elevator=cfq"], $["key":"__intern__", "value":$["auto":true, "changed":false, "devs":["/dev/sda7"], "type":"linux"]]]] 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:451 Calling bootloader executable 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:428 Running command /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:433 Exit code of /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1: 1
-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com
You might need to change the bootloader configuration accordingly. Especially <prep_boot_partition>. If it still does not work, send me the log files and the control file in a private email. Thanks, Anas Joseph H Zhao wrote:
Anas,
When I using the control file with primary partition type fpr prep, the error message changed to "image=/boot/vmlinux ist not a regular file". When I check the /boot directory, there is no vmlinux file there.
Joseph
Anas Nashif <nashif@suse.de> To 09/02/2004 01:32 Joseph H PM Zhao/Rochester/Contr/IBM@IBMUS cc suse-autoinstall@suse.com Subject [suse-autoinstall] Re: Error when autoyast install ppc64 partition (Squadron system)
Hi, On these systems you need the root partition to be primary. Add <partition_type>primary</partition_type> to your partitions and it should work.
Anas
Joseph H Zhao wrote:
Hi,
I has been trying to install a ppc64 Squadron partition using autoyast.
I
am stuck at the following errors at the" install boot manager" stage with the following error message:
Error Occurred while installing yaboot: ERROR:boot=/dev/null is not a valid block device
Can someone shed some light on what could cause the error ? The last
part
of the yast log is as follows.
Thanks, Joseph
2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(poolSetInstalled):221 installed objects set! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):351 START 10 Selectables 2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(ClearSaveState):538 SaveState cleared! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):391 END 0 Selectables 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):683 Calling closeDatabase: RpmDb[V4(Xcm)V3(---): '(/mnt)/var/lib/rpm'] 2004-09-29 14:14:17 <1> linux(762) [librpmDb]
librpmDb.cc(blockAccess):327
Block access 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):711 closeDatabase: RpmDb[NO_INIT] 2004-09-29 14:14:17 <1> linux(762) [Y2PM] Y2PM.cc(instTargetClose):329 InstTarget down 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1516 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/evms/sda1", "fstype":"EVMS", "id":64, "nr":"sda1", "region":[0, 1], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda2", "fstype":"EVMS", "id":26, "nr":"sda2", "region":[0, 1024], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda3", "fstype":"EVMS", "id":367, "nr":"sda3", "region":[0, 33674], "type":`evms], $["device":"/dev/sda1", "fsid":5, "nr":1, "region":[0, 17357], "type":`extended], $["device":"/dev/sda5", "fs_options":$[], "fsid":65, "fstype":"PPC PReP Boot", "mount":"",
"nr":5,
"prep_install":true, "region":[0, 8], "type":`logical, "used_fs":nil], $["device":"/dev/sda6", "fs_options":$[], "fsid":130, "mount":"swap", "nr":6, "region":[8, 512], "type":`logical], $["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil]] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1573
CheckForLvmRootFs
root=$["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil] dev=$["disk":"/dev/sda", "nr":7] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1576
CheckForLvmRootFs
ret=false 2004-09-29 14:14:17 <1> linux(762) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US",
"RebootMsg":"0",
"Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-29 14:14:17 <1> linux(762) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["ipr"] 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:316 Writing modules
ipr
2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:408 Saving configuration files 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/misc.ycp:955 Saving: glob: [$["key":"default", "value":"linux"], $["key":"timeout", "value":100], $["changed":true, "key":"boot", "value":"/dev/null"], $["changed":true, "key":"activate", "value":true]], sec:
[[$["key":"image",
"value":"/boot/vmlinux"], $["key":"label", "value":"linux"], $["key":"root", "value":"/dev/sda7"], $["changed":true, "key":"append", "value":"selinux=0 elevator=cfq"], $["key":"__intern__", "value":$["auto":true, "changed":false, "devs":["/dev/sda7"], "type":"linux"]]]] 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:451 Calling bootloader executable 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:428 Running command /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:433 Exit code of /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1: 1
-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com
Hi, Your control file is wrong: <packages> <package>lsvpd</package> </packages> should be <packages config:type="list"> <package>lsvpd</package> </packages> Anas Joseph H Zhao wrote:
Anas,
When I using the control file with primary partition type fpr prep, the error message changed to "image=/boot/vmlinux ist not a regular file". When I check the /boot directory, there is no vmlinux file there.
Joseph
Anas Nashif <nashif@suse.de> To 09/02/2004 01:32 Joseph H PM Zhao/Rochester/Contr/IBM@IBMUS cc suse-autoinstall@suse.com Subject [suse-autoinstall] Re: Error when autoyast install ppc64 partition (Squadron system)
Hi, On these systems you need the root partition to be primary. Add <partition_type>primary</partition_type> to your partitions and it should work.
Anas
Joseph H Zhao wrote:
Hi,
I has been trying to install a ppc64 Squadron partition using autoyast.
I
am stuck at the following errors at the" install boot manager" stage with the following error message:
Error Occurred while installing yaboot: ERROR:boot=/dev/null is not a valid block device
Can someone shed some light on what could cause the error ? The last
part
of the yast log is as follows.
Thanks, Joseph
2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(poolSetInstalled):221 installed objects set! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):351 START 10 Selectables 2004-09-29 14:14:17 <1> linux(762) [packagemanager++] PMManager.cc(ClearSaveState):538 SaveState cleared! 2004-09-29 14:14:17 <1> linux(762) [packagemanager] PMManager.cc(poolAdjust):391 END 0 Selectables 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):683 Calling closeDatabase: RpmDb[V4(Xcm)V3(---): '(/mnt)/var/lib/rpm'] 2004-09-29 14:14:17 <1> linux(762) [librpmDb]
librpmDb.cc(blockAccess):327
Block access 2004-09-29 14:14:17 <1> linux(762) [rpmdb] RpmDb.cc(closeDatabase):711 closeDatabase: RpmDb[NO_INIT] 2004-09-29 14:14:17 <1> linux(762) [Y2PM] Y2PM.cc(instTargetClose):329 InstTarget down 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1516 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/evms/sda1", "fstype":"EVMS", "id":64, "nr":"sda1", "region":[0, 1], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda2", "fstype":"EVMS", "id":26, "nr":"sda2", "region":[0, 1024], "type":`evms], $["detected_fs":`unknown, "device":"/dev/evms/sda3", "fstype":"EVMS", "id":367, "nr":"sda3", "region":[0, 33674], "type":`evms], $["device":"/dev/sda1", "fsid":5, "nr":1, "region":[0, 17357], "type":`extended], $["device":"/dev/sda5", "fs_options":$[], "fsid":65, "fstype":"PPC PReP Boot", "mount":"",
"nr":5,
"prep_install":true, "region":[0, 8], "type":`logical, "used_fs":nil], $["device":"/dev/sda6", "fs_options":$[], "fsid":130, "mount":"swap", "nr":6, "region":[8, 512], "type":`logical], $["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil]] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1573
CheckForLvmRootFs
root=$["detected_fs":nil, "device":"/dev/sda7", "fs_options":$[], "fsid":131, "mount":"/", "nr":7, "region":[520, 2560], "type":`logical, "used_fs":nil] dev=$["disk":"/dev/sda", "nr":7] 2004-09-29 14:14:17 <1> linux(762) [YCP] Storage.ycp:1576
CheckForLvmRootFs
ret=false 2004-09-29 14:14:17 <1> linux(762) [YCP] Misc.ycp:146 WriteYaSTInf($["Keytable":"us.map.gz", "Language":"en_US",
"RebootMsg":"0",
"Root":"reboot"]) = Keytable: us.map.gz Language: en_US RebootMsg: 0 Root: reboot 2004-09-29 14:14:17 <1> linux(762) [YCP] Bootloader.ycp:316 Writing bootloader configuration 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:269 Initrd::Write called, changed: true, list: ["ipr"] 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:304 Modules [] were added to initrd not using Initrd module 2004-09-29 14:14:18 <1> linux(762) [YCP] Initrd.ycp:316 Writing modules
ipr
2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:408 Saving configuration files 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/misc.ycp:955 Saving: glob: [$["key":"default", "value":"linux"], $["key":"timeout", "value":100], $["changed":true, "key":"boot", "value":"/dev/null"], $["changed":true, "key":"activate", "value":true]], sec:
[[$["key":"image",
"value":"/boot/vmlinux"], $["key":"label", "value":"linux"], $["key":"root", "value":"/dev/sda7"], $["changed":true, "key":"append", "value":"selinux=0 elevator=cfq"], $["key":"__intern__", "value":$["auto":true, "changed":false, "devs":["/dev/sda7"], "type":"linux"]]]] 2004-09-29 14:14:18 <1> linux(762) [YCP] Bootloader.ycp:451 Calling bootloader executable 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:428 Running command /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1 2004-09-29 14:14:18 <1> linux(762) [YCP] bootloader/routines/lilolike.ycp:433 Exit code of /sbin/lilo >> /var/log/YaST2/y2loglilo 2>&1: 1
-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com
participants (3)
-
Anas Nashif -
Joseph H Zhao -
Stephan A. Rickauer