Dear fellow SuSE fans (sometimes a little bit victim!!) I have a Dynalink 1456 intern PCI modem, a conexant SoftK56 data, fax, TAMPCI modem with Vendor ID = 127a and Device ID = 1025 on my computer. After installation of SuSE 9.0 and configuration of Kinternet, as given below, and configuration of the modem with Yast as ppp0 I could not make contact with my provider. No way! I tried to install hsfmodem-6.03.00lnxt03091800free_k2.4.20_4GB-1suse-i586 from Linuxant but got the message "existing driver modules found under /lib/modules/2.4.21-99-athlon/misc/" where I found 8 files hsf*.0 In information center I got the following: PCI 00:07.0 Communication controller Rockwell International HCF 56k Data/Fax?Voice/Spkp Subsystem: Rockwell International HCF 56k Data/Fax?Voice/Spkp(w/Handset)Modem Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at dffe0000 (32-bit, non prefetchable)(size = 64k) I/O ports at c 400 [size = 8] Capabilities: <availble only to root> Meanwhile a understood from the Linuxant site that my modem could run under a hcf or a hsf driver Can anybody tell me what to do? Thanks, Andre den Oudsten The Kinternet configuration looks now as follows: ask-password no auto-dns yes auto-reconnect no auto-reconnect-delay 15 auto-reconnect-exits 8 baud-rate 56700 chat-script wvdial connection-type modem default-route yes demand no device /dev/modem dial-command ATDT dns1 dns2 endpoint random idle-seconds 300 ifcfg-filename ifcfg-ppp0 init1 ATZ init2 AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 init8 ATMT local-ip max-number-of-links 1 modify-dns yes modify-ip yes multilink no password <hidden> phone 0676002505 pppd-options ppp-mode ppp provider-filename provider0 remote-ip stupid-mode no username andredo wvdial.conf looks as follows: [Dialer Defaults] Modem = /dev/modem Baud = 57600 Init1 = ATZ Init2 = AT Q0 V1 E1 S0=0 &C1 &D2 Init3 = Area Code = Phone = Username = Password = Ask Password = Dial Command = ATDT Stupid Mode = 1 Compuserve = 0 Force Address = Idle Seconds = 300 Dial Message1 = Dial Message2 = ISDN = 0 Auto DNS = 1