Hi, I have a system with hardware RAID and virtual media (CD and Floppy). If I boot the system with SLES 10 SP 1, the RAID drive is seen as /dev/sda. However, if I boot the same system from the network (PXE), the drive is shown as /dev/sdc. Does anybody know why virtual media is detected first when I boot from the network? Is there a way to make it detect the RAID drive first and shown as /dev/sda when I boot from network? Thanks! "Tumbleweed Communications <tumbleweed.com>" made the following annotations on 12/16/07, 20:28:57 ------------------------------------------------------------------------------ === Tumbleweed Communications Disclaimer === This e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately. Tumbleweed Communications Corp., an industry leader in managed file transfer and content security, provides enterprise-class solutions to organizations of all sizes. Tumbleweed's innovative products enable organizations to effectively manage and protect business-critical Internet communications, with capabilities that span secure file transfer, encryption, data loss prevention, and email security. ============================================================================== -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org