[opensuse-autoinstall] Yast auto installation error codes
Hi All, I'm getting an occasional error when I install using autoyast. The error is Install program error code is 135 What does the error code 135 mean? I've searched the internet for error code definitions but no luck. The log files have no errors and stop after loading ncurses. The error occurs near the start of the autoinstallation process. Thanks Greg -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
On 21.02.2012 20:39, Kent, Gregory wrote:
I'm getting an occasional error when I install using autoyast. The error is Install program error code is 135
What does the error code 135 mean? I've searched the internet for error code definitions but no luck. The log files have no errors and stop after loading ncurses. The error occurs near the start of the autoinstallation process.
but yast already started and the XML file was read? Then maybe your XML is not okay, like a missing 'config:type="list"' or so. Then yast crashes and that can lead to such an error. -- ciao, Uwe Gansert SUSE LINUX Products GmbH, HRB 16746 (AG Nürnberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer Home: http://www.suse.de/~ug - Blog: http://suse.gansert.net listening to: "Simple Machines" by Dismantled -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
The installation succeeds most of the time so I think its not an issue with the xml. Below is the contents of the y2start.log Stage [1]: YaST2 startup level (1)... Stage [1]: ========================== |-- export AutoYaST="http://naisl-vtc.vtc.englab.netapp.com/10.96.99.17.xml" |-- export BOOT_IMAGE="/boot/sles-11-sp1-x86_64/linux" |-- export Broadcast="10.96.99.255" |-- export Cmdline="auto" |-- export ConfigureNetwork="0" |-- export Device="eth0" |-- export Display="Color" |-- export Domain="naisl-vtc" |-- export EFI="0" |-- export ESCDELAY="10" |-- export Gateway="10.96.98.1" |-- export HOME="/" |-- export HWAddr="00:50:56:00:63:11" |-- export HasPCMCIA="0" |-- export Hostname="10.96.99.17" |-- export IP="10.96.99.17" |-- export InitrdID="2010-05-20.accb7091" |-- export InitrdModules="hwmon thermal_sys thermal cdrom mptbase scsi_mod mptscsih scsi_transport_spi mptspi libata ata_piix ata_generic ide-core piix ide-pci-generic parport parport_pc ppa" |-- export InstMode="http" |-- export InstsysURL="boot/x86_64/root" |-- export Keyboard="1" |-- export LD_LIBRARY_PATH=":/y2update/lib64:/y2update/lib:/y2update/plugin" |-- export Locale="en_US" |-- export Manual="0" |-- export MemFree="3947716" |-- export Nameserver="192.168.110.2" |-- export NetCardName="VMware PRO/1000 MT Single Port Adapter" |-- export NetConfig="dhcp" |-- export NetUniqueID="rBUF.5dU8kR7eh2C" |-- export Netdevice="eth0" |-- export Netmask="255.255.254.0" |-- export Network="10.96.98.0" |-- export NoPCMCIA="0" |-- export OLDPWD |-- export Options="loop max_loop=64" |-- export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11/bin:/lbin" |-- export PWD="/" |-- export RepoURL="http://naisl-vtc.vtc.englab.netapp.com/sles11sp1-x86_64?device=eth0" |-- export SHLVL="3" |-- export Server="naisl-vtc.vtc.englab.netapp.com" |-- export Serverdir="sles11sp1-x86_64" |-- export SourceType="dir" |-- export Sourcemounted="0" |-- export StartShell="0" |-- export TERM="linux" |-- export Textmode="1" |-- export UpdateDir="/linux/suse/x86_64-sles11" |-- export UseSSH="0" |-- export UseSax2="0" |-- export VNC="0" |-- export WithiSCSI="0" |-- export XCURSOR_THEME="DMZ" |-- export Y2GDB="0" |-- export YAST2_SSH="false" |-- export YAST_DEBUG="/debug/yast.debug" |-- export YaST2update="0" |-- export autoyast="http://naisl-vtc.vtc.englab.netapp.com/10.96.99.17.xml" |-- export gateway="10.96.98.1" |-- export hostip="10.96.99.17" |-- export initrd="/boot/sles-11-sp1-x86_64/initrd" |-- export install="http://naisl-vtc.vtc.englab.netapp.com/sles11sp1-x86_64" |-- export kexec_reboot="0" |-- export nameserver="10.96.98.5" |-- export netdevice="eth0" |-- export textmode="1" |-- export xxxZyppRepoURL="(null)" |-- Creating hook script list: preFirstStage... |-- Level 1 stages: |-- F02-hwinfo |-- F03-umount |-- F04-language |-- F05-cmdline |-- F06-terminal |-- F08-logging |-- F09-start |-- F10-cleanup Stage [1]: Starting F02-hwinfo... Stage [1]: ====================== |-- Hardware detection for arch: x86_64 Stage [1]: Starting F03-umount... Stage [1]: ====================== |-- Trying to umount inst-sys exits with code: 1 Stage [1]: Starting F04-language... Stage [1]: ======================== |-- Language set to: en_US.UTF-8 |-- Starting UTF-8 mode... Stage [1]: Starting F05-cmdline... Stage [1]: ======================= Stage [1]: Starting F06-terminal... Stage [1]: ======================== |-- Setup virtual console: |-- Lines: |-- Columns: |-- Type: linux Stage [1]: Starting F08-logging... Stage [1]: ======================= |-- Set YaST2 LOG parameters: |-- Maximum log size: 1243788 Kb |-- Maximum log count: 5 Stage [1]: Starting F09-start... Stage [1]: ===================== |-- Creating hook script list: preFirstCall... |-- Delegate program call to YaST2.call installation initial Stage [call]: Starting prequalification checks... Stage [call]: =================================== |-- Gtk plugin check failed -> Medium Gtk disabled |-- No SSH daemon running -> Medium SSH disabled Stage [call]: Evaluate medium selection... Stage [call]: ============================ |-- Medium Textmode (ncurses) has been selected Stage [call]: Check selected medium... Stage [call]: ======================== |-- Wished medium is: NCURSES |-- Selected medium is: NCURSES |-- Check for FB-I-terminal: RUN_FBITERM = 0 |-- Allow big memory allocation: overcommit_memory=1 |-- Starting YaST2: |-- MODULE_NAME: installation |-- MODE_FLAGS: |-- MODULE_ARGS: ("initial") |-- MODE: ncurses |-- UI_ARGS: |-- QT_IM_MODULE: xim |-- YaST procedure ended successfully |-- Reset memory allocation: overcommit_memory=0 |-- Copy first level log file to installed system |-- Creating hook script list: postFirstCall... Stage [1]: Starting F10-cleanup... Stage [1]: ======================= |-- YaST2 exit code on level (1): 135 |-- Stopping UTF-8 mode... |-- Creating hook script list: postFirstStage... -----Original Message----- From: Uwe Gansert [mailto:ug@suse.de] Sent: Wednesday, February 22, 2012 12:56 AM To: opensuse-autoinstall@opensuse.org Subject: Re: [opensuse-autoinstall] Yast auto installation error codes On 21.02.2012 20:39, Kent, Gregory wrote:
I'm getting an occasional error when I install using autoyast. The error is Install program error code is 135
What does the error code 135 mean? I've searched the internet for error code definitions but no luck. The log files have no errors and stop after loading ncurses. The error occurs near the start of the autoinstallation process.
but yast already started and the XML file was read? Then maybe your XML is not okay, like a missing 'config:type="list"' or so. Then yast crashes and that can lead to such an error. -- ciao, Uwe Gansert SUSE LINUX Products GmbH, HRB 16746 (AG Nürnberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer Home: http://www.suse.de/~ug - Blog: http://suse.gansert.net listening to: "Simple Machines" by Dismantled -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
On 22.02.2012 21:10, Kent, Gregory wrote:
The installation succeeds most of the time so I think its not an issue with the xml. Below is the contents of the y2start.log
I need to see the /var/log/YaST2/y2log file then -- ciao, Uwe Gansert SUSE LINUX Products GmbH, HRB 16746 (AG Nürnberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer Home: http://www.suse.de/~ug - Blog: http://suse.gansert.net listening to: "Load '*',8,1" by Eisenfunk -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
On 22.02.2012 21:10, Kent, Gregory wrote:
The installation succeeds most of the time so I think its not an issue with the xml. Below is the contents of the y2start.log
I need to see the /var/log/YaST2/y2log file then
Here's my y2log file 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [liby2] genericfrontend.cc(main):648 Launched YaST2 component 'y2base' 'installation' '("initial")' 'ncurses' 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ui-component] YUIComponentCreator.cc(createInternal):113 Creating UI component for "" 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ui-component] YUIComponentCreator.cc(createInternal):128 Returning existing UI component for "ncurses" 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(SetLanguage):503 GET encoding for en_US.UTF-8: UTF-8 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Wizard) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ui-component] YUIComponentCreator.cc(createInternal):128 Returning existing UI component for "" 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Label) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Popup) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Mode) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Directory) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (String) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Icon) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (SuSERelease) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Stage) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Report) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2WFMComponent.cc(import):749 Y2WFMComponent::import (Summary) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [wfm] Y2CCWFM.cc(createInLevel):148 Parsing finished 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [liby2] genericfrontend.cc(main):802 YAST_IS_RUNNING is instsys 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ui] YUI.cc(YUI):62 Creating UI with threads 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] YNCursesUI.cc(YNCursesUI):60 Start YNCursesUI 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] YNCursesUI.cc(YNCursesUI):76 setenv LC_CTYPE: en_US.UTF-8 encoding: UTF-8 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):192 Launch NCurses...(ui-ncurses-2.17.17) 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):197 TERM=linux 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):210 isatty(stdin)yes 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):218 mytty: /dev/console 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(RedirectToLog):574 isatty(stderr)yes 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(RedirectToLog):583 isatty(stdout)yes 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):288 have color = 1 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):313 screen size 23 x 80 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCstyle.cc(NCstyle):308 Init linux using color => 4 styles in linux 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(SetTitle):479 Draw title called 2012-02-21 07:17:22 <1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):324 NCurses ready Thanks
-- ciao, Uwe Gansert
SUSE LINUX Products GmbH, HRB 16746 (AG Nürnberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer Home: http://www.suse.de/~ug - Blog: http://suse.gansert.net listening to: "Load '*',8,1" by Eisenfunk -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
On 23.02.2012 19:12, Kent, Gregory wrote:
I need to see the /var/log/YaST2/y2log file then
Here's my y2log file 2012-02-21 07:17:22<1> 10.96.99.17(3676) [ncurses] NCurses.cc(SetTitle):479 Draw title called 2012-02-21 07:17:22<1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):324 NCurses ready
if that is all, then it's not really much. Yast dies for a reason I don't know yet. Please pass Y2DEBUG=1 to linuxrc. I hope to see more in the y2log then. For the moment I'm in the dark but it's not autoyast related. Yast itself can not even start on your machine. do you force the ncurses UI by textmode=1? does it happen in QT too? looks like it something hardware dependent -- ciao, Uwe Gansert SUSE LINUX Products GmbH, HRB 16746 (AG Nürnberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer Home: http://www.suse.de/~ug - Blog: http://suse.gansert.net listening to: "Tunnel" by Kiew -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
On 23.02.2012 19:12, Kent, Gregory wrote:
I need to see the /var/log/YaST2/y2log file then
Here's my y2log file 2012-02-21 07:17:22<1> 10.96.99.17(3676) [ncurses] NCurses.cc(SetTitle):479 Draw title called 2012-02-21 07:17:22<1> 10.96.99.17(3676) [ncurses] NCurses.cc(init):324 NCurses ready
if that is all, then it's not really much. Yast dies for a reason I don't know yet. Please pass Y2DEBUG=1 to linuxrc. I hope to see more in the y2log then.
I've attached my y2log with debug enabled.
For the moment I'm in the dark but it's not autoyast related. Yast itself can not even start on your machine.
do you force the ncurses UI by textmode=1? does it happen in QT too?
Yes, we force textmode. I haven't tried it in QT yet.
looks like it something hardware dependent
The hardware is vmware ESXi4 and ESXi5. The problem doesn't occur when installing SLES10-SP1/2/3. It only started occurring with SLES11-SP1. I haven't tried it with SLES11-SP0. Thanks Greg
-- ciao, Uwe Gansert
SUSE LINUX Products GmbH, HRB 16746 (AG Nürnberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer Home: http://www.suse.de/~ug - Blog: http://suse.gansert.net listening to: "Tunnel" by Kiew -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner@opensuse.org
participants (2)
-
Kent, Gregory -
Uwe Gansert