Third try :)

I cant reproduce this. Works fine for me. Can you send me the y2log files please.

I attach the last lines (I have tried to send the entire file, but mailer daemon doesn't allow big messages) of: /var/log/YaST/y2log: (...) 2003-10-08 08:51:18 <1> linux(398) [Interpreter] clients/autoinst_setup.ycp:20 Loading YCP module Timezone 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Timezone.ycp(Set):168 Set default timezone: <Europe/Madrid> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Timezone.ycp(Set):171 Set timezone:Europe/Madrid sel:0 name:Europa / España 2003-10-08 08:51:20 <1> linux(398) [Interpreter] clients/autoinst_setup.ycp:24 Loading YCP module Bootloader 2003-10-08 08:51:20 <1> linux(398) [Interpreter] modules/Bootloader.ycp:24 Loading YCP module BootCommon 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/lilolike.ycp:22 Loading YCP module BootCommon 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:19 Loading YCP module BootGRUB 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:20 Loading YCP module BootLILO 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:21 Loading YCP module BootSILO 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:22 Loading YCP module BootMILO 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:23 Loading YCP module BootABOOT 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:24 Loading YCP module BootELILO 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:26 Loading YCP module BootS390 2003-10-08 08:51:20 <1> linux(398) [Interpreter] routines/switcher.ycp:27 Loading YCP module BootPPC 2003-10-08 08:51:20 <1> linux(398) [Interpreter] clients/autoinst_setup.ycp:28 Loading YCP module AutoinstStorage 2003-10-08 08:51:20 <1> linux(398) [Interpreter] modules/AutoinstStorage.ycp:16 Loading YCP module Summary 2003-10-08 08:51:20 <1> linux(398) [Interpreter] clients/autoinst_setup.ycp:29 Loading YCP module AutoinstScripts 2003-10-08 08:51:20 <1> linux(398) [Interpreter] clients/autoinst_setup.ycp:30 Loading YCP module AutoinstGeneral 2003-10-08 08:51:20 <1> linux(398) [Interpreter] clients/autoinst_setup.ycp:31 Loading YCP module AutoinstSoftware 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/AutoinstGeneral.ycp(AutoinstGeneral::Write):183 Writing general settings: keymap -> spanish, timezone -> Europe/Madrid 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):794 Setting keyboard to: <spanish> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):805 Description for keyboard <spanish>: <[_("Spanish"), $["ncurses":"es.map.gz"]]> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):809 Retranslating for: es_ES 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):818 x11data=$["Apply":"xfree86:complete:complete:en_US(pc102)+es:pc(pc102)", "MapName":"Standard Keyboard [ pc102 ]", "Protocol":"Standard", "XkbLayout":"es", "XkbModel":"pc102"] 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(Keyboard::SetConsole):982 Setting console keyboard to: <spanish> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(Keyboard::SetConsole):984 loadkeys command: </bin/loadkeys es.map.gz> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):794 Setting keyboard to: <spanish> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):805 Description for keyboard <spanish>: <[_("Spanish"), $["ncurses":"es.map.gz"]]> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):809 Retranslating for: es_ES 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(SetLanguage):818 x11data=$["Apply":"xfree86:complete:complete:en_US(pc102)+es:pc(pc102)", "MapName":"Standard Keyboard [ pc102 ]", "Protocol":"Standard", "XkbLayout":"es", "XkbModel":"pc102"] 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(Keyboard::SetX11):1016 Setting X11 keyboard to: <spanish> 2003-10-08 08:51:20 <1> linux(398) [YCP] modules/Keyboard.ycp(Keyboard::SetX11):1032 Setting X keyboard: /usr/X11R6/bin/xkbset -l "xfree86:complete:complete:en_US(pc102)+es:pc(pc102)" 2003-10-08 08:51:22 <1> linux(398) [YCP] modules/Timezone.ycp(Timezone::Set):171 Set timezone:Europe/Madrid sel:0 name:Europa / España 2003-10-08 08:51:22 <1> linux(398) [agent-system] SystemAgent.cc(Execute):1077 mkdir /tmp/YaST2-00398-7FC2eY/pre-scripts 2003-10-08 08:51:22 <1> linux(398) [agent-system] SystemAgent.cc(Execute):1077 mkdir /tmp/YaST2-00398-7FC2eY/pre-scripts/logs 2003-10-08 08:51:22 <1> linux(398) [YCP] modules/AutoinstStorage.ycp(AutoinstStorage::Write):127 Initial Target map: $["/dev/hda":$["bios_id":"0x80", "bus":"IDE", "cyl_count":2490, "cyl_size":8224768, "label":"msdos", "max_primary":4, "model":"ST320423A", "name":"1. IDE, 19.07 GB, /dev/hda, ST320423A", "partitions":[$["detected_fs":`unknown, "device":"/dev/hda1", "fsid":12, "fstype":"Win95 FAT32 LBA", "nr":1, "region":[0, 383], "type":`primary, "used_fs":`unknown], $["detected_fs":`reiser, "device":"/dev/hda2", "fsid":130, "fstype":"Linux swap", "nr":2, "region":[383, 39], "type":`primary, "used_fs":`reiser, "uuid":"78505d8d-80d9-47fc-933f-76270d7190cb"], $["detected_fs":`unknown, "device":"/dev/hda3", "fsid":131, "fstype":"Linux native", "nr":3, "region":[422, 893], "type":`primary, "used_fs":`unknown]], "scrpath":.hda, "unique":"nBbg.6HsYcc+W4l7"]] 2003-10-08 08:51:22 <1> linux(398) [YCP] modules/AutoinstStorage.ycp(AutoinstStorage::Write):137 Drives=[$["device":"/dev/hda", "size":8224768]] 2003-10-08 08:51:22 <1> linux(398) [YCP] modules/AutoinstStorage.ycp(AutoinstStorage::Write):161 New Auto-Install tagetMap: $["/dev/hda":$["partitions":[$["create":false, "format":true, "mount":"/", "partition_id":131], $["create":false, "filesystem":`swap, "format":true, "mount":"swap", "partition_id":130]]]] 2003-10-08 08:51:22 <1> linux(398) [YCP] modules/AutoinstStorage.ycp(AutoinstStorage::Write):211 Creating partition plans for /dev/hda 2003-10-08 08:51:22 <1> linux(398) [YCP] modules/Partitions.ycp(PrepBoot):177 ret:false 2003-10-08 08:51:23 <1> linux(398) [YCP] modules/BootCommon.ycp(BootCommon::getLoaderType):452 Bootloader detection returned grub 2003-10-08 08:51:23 <1> linux(398) [YCP] modules/Storage.ycp(GetSubDevFilterList):1953 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/hda1", "fsid":12, "fstype":"Win95 FAT32 LBA", "nr":1, "region":[0, 383], "type":`primary, "used_fs":`unknown], $["detected_fs":`reiser, "device":"/dev/hda2", "fsid":130, "fstype":"Linux swap", "nr":2, "region":[383, 39], "type":`primary, "used_fs":`reiser, "uuid":"78505d8d-80d9-47fc-933f-76270d7190cb"], $["detected_fs":`unknown, "device":"/dev/hda3", "fsid":131, "fstype":"Linux native", "nr":3, "region":[422, 893], "type":`primary, "used_fs":`unknown]] 2003-10-08 08:51:23 <1> linux(398) [YCP] modules/Storage.ycp(GetSubDevFilterList):1953 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/hda1", "fsid":12, "fstype":"Win95 FAT32 LBA", "nr":1, "region":[0, 383], "type":`primary, "used_fs":`unknown], $["detected_fs":`reiser, "device":"/dev/hda2", "fsid":130, "fstype":"Linux swap", "nr":2, "region":[383, 39], "type":`primary, "used_fs":`reiser, "uuid":"78505d8d-80d9-47fc-933f-76270d7190cb"], $["detected_fs":`unknown, "device":"/dev/hda3", "fsid":131, "fstype":"Linux native", "nr":3, "region":[422, 893], "type":`primary, "used_fs":`unknown]] 2003-10-08 08:51:23 <1> linux(398) [YCP] modules/Storage.ycp(CheckForLvmRootFs):968 root=$[] dev=$["nr":0] 2003-10-08 08:51:23 <1> linux(398) [YCP] modules/Storage.ycp(CheckForLvmRootFs):971 ret=false 2003-10-08 08:51:23 <1> linux(398) [YCP] modules/Storage.ycp(GetSubDevFilterList):1953 GetSubDevFilterList partitions [$["detected_fs":`unknown, "device":"/dev/hda1", "fsid":12, "fstype":"Win95 FAT32 LBA", "nr":1, "region":[0, 383], "type":`primary, "used_fs":`unknown], $["detected_fs":`reiser, "device":"/dev/hda2", "fsid":130, "fstype":"Linux swap", "nr":2, "region":[383, 39], "type":`primary, "used_fs":`reiser, "uuid":"78505d8d-80d9-47fc-933f-76270d7190cb"], $["detected_fs":`unknown, "device":"/dev/hda3", "fsid":131, "fstype":"Linux native", "nr":3, "region":[422, 893], "type":`primary, "used_fs":`unknown] (The first one seems to have been generated after the partitioning fail, but I don't really sure). Do you need any other log file or specific information? -------- Fermín