Hello! Im trying to follow the PXE HOW-TO for installing SuSE 9.2 on my brand new IBM Thinkpad X40. I have set up the tftp-server, copied pxegrub to the tftpboot directory, added the suggested lines to the dhcp server configuration (Im pretty sure the bootp client gets an ID, dhcp server allows IPs 192.168.0.200-204), copied the kernel and the initrd to to the tftp directory and created the sample menu.lst in the tftp boot directory. The first suggested change of the menu.lst is not done yet, since I havent found out the module name of the network card yet, but I still think that the actions above would present me with a grub bootloader screen on my X40 when booting over LAN. As connection between my X40 and my server I use a cross-connected TP cable. Now to the problem. When I boot my X40 over LAN I get the following messages: _____messages_start___________________________________________ Intel(R) Boot Agent GE v1.2.17 Copyright (C) 1997-2003, Intel Corporation Intel(R) Boot Agent PXE Base Code (BA1217BC) Copyright (C) 1997-2003, Intel Corporation CLIENT MAC ADDR: <macaddr> GUID: <guid> CLIENT IP: 192.168.0.203 MASK: 255.255.255.0 DHCP IP: 192.168.0.2 GATEWAY IP: 192.168.0.2 Probing...[RTL8139] - The PCI BIOS has not enabled this service! Updating PCI command 0106->0107. pci_bus 00 pci_device_fn 00 PCI latency timer (CFLT) is unreasonably low at 0. Setting to 32 clocks. ioaddr 0X0000, addr AA:AA:00:00:AA:AA 10Mbps full-duplex _____messages_end_____________________________________________ It seems that the dhcp service works since the client gets an IP of 192.168.0.203, but after that Im completely at a loss. Can anyone please help me figure out what is wrong and why I dont get the menu screen? What is the client probing for, and what is RTL8139? I cannot find anything about it in the BIOS, so haw do I enable it? Any help at all would be greatfully appreciated! Sincerely, Magnus Gedda