Hi, according to bootloader/routines/misc.ycp, the mountby-setting for the device should be transferred to the bootloader config: /** FATE #302219 - Use and choose persistent device names for disk devices * Converts a device name to the corresponding device name it should be * mounted by, according to the "mountby" setting for the device from * yast2-storage. However, although I've chosen to mount by device in my profile (and fstab correctly contains the /dev/sdx stuff), the lilo.conf still contains the /dev/disk/by-id entries. I find a lot of 2009-04-22 15:58:12 <1> cantor(4418) [YCP] bootloader/routines/misc.ycp:630 Dev2MountByDev: /dev/sda2 2009-04-22 15:58:12 <1> cantor(4418) [YCP] bootloader/routines/misc.ycp:640 Default mount by is `id entries in y2log, so obviously the setting is not fetched correctly from the storage module in the Dev2MountByDev function. Could the 2009-04-22 15:48:34 <1> cantor(4418) [YCP] AutoinstStorage.ycp:274 unknown mountby parameter '`device' will be ignored message be related with this? Adding to my wishlist for a driverupdate :-) cu, Frank -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. * -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org