Hi. I'm using autoyast to install SLES9 on a machine. The install itself works. But I have a problem with the network configuration. During the install the machine obtains a dhcp address and performs the install. When the install is applying the static ipadress defined in the autoyast xml configuration file the dhcp address isn't released and I get something looking like this: 2: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:17:a4:f8:19:7d brd ff:ff:ff:ff:ff:ff inet 10.73.18.249/24 brd 10.255.255.255 scope global eth0 inet 10.73.18.55/24 brd 10.73.18.255 scope global secondary eth0 inet6 fe80::217:a4ff:fef8:197d/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether 00:17:a4:f8:19:7c brd ff:ff:ff:ff:ff:ff The address 10.73.18.249 is provided by the DHCP during install. The address 10.73.18.55 is defined in the autoyast configuration file. This gives problems later on when mounting NFS shares, because the NFS shares is restricted to the address 10.73.18.55 and the machine connects to the NFS server as 10.73.18.249 How is this resolveable? Is this a known bug? -- Kind regards Jacob Emcken -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org