"No products to register" after autoyast installation

25 Aug 2006

      Hey,
After an autoyast installation registration of the system (and hence
automaticupdates) fail.

blade5-eth0:~ # suse_register
No products to register
blade5-eth0:~ # ls /var/lib/zypp/db/products 
blade5-eth0:~ #

We used our own installation source (copy from the DVDs) but we nerver
had these problem in a manual installation.

Any ideas? (Is there a default location for the autoyast-logfile? Does
someone want to have a look at it?)

Regards
Jan

--

Autoyast config file follows:

<?xml version="1.0"?>
<!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns"
xmlns:config="http://www.suse.com/1.0/configns">
  <bootloader>
    <activate config:type="boolean">true</activate>
    <global>
      <embed_stage1.5 config:type="boolean">true</embed_stage1.5>
      <lines_cache_id>0</lines_cache_id>
      <prompt>1</prompt>
      <stage1_dev>/dev/sda1</stage1_dev>
      <timeout config:type="integer">8</timeout>
    </global>
    <initrd_modules config:type="list">
      <initrd_module>
        <module>amd74xx</module>
      </initrd_module>
      <initrd_module>
        <module>cciss</module>
      </initrd_module>
      <initrd_module>
        <module>qla2xxx</module>
      </initrd_module>
      <initrd_module>
        <module>processor</module>
      </initrd_module>
      <initrd_module>
        <module>thermal</module>
      </initrd_module>
      <initrd_module>
        <module>fan</module>
      </initrd_module>
      <initrd_module>
        <module>reiserfs</module>
      </initrd_module>
    </initrd_modules>
    <loader_device></loader_device>
    <loader_type>grub</loader_type>
    <location>mbr</location>
    <repl_mbr config:type="boolean">false</repl_mbr>
    <sections config:type="list">
      <section>
        <append>resume=/dev/sda2  splash=silent showopts</append>
        <initial>1</initial>
        <initrd>/boot/initrd</initrd>
        <kernel>/boot/vmlinuz</kernel>
        <lines_cache_id>1</lines_cache_id>
        <name>SUSE Linux 10.1</name>
        <original_name>linux</original_name>
        <root>/dev/sda1</root>
        <type>image</type>
      </section>
      <section>
        <append>showopts ide=nodma apm=off acpi=off noresume nosmp
noapic maxcpus=0 edd=off 3</append>
        <initrd>/boot/initrd</initrd>
        <kernel>/boot/vmlinuz</kernel>
        <lines_cache_id>2</lines_cache_id>
        <name>Failsafe -- SUSE Linux 10.1</name>
        <original_name>failsafe</original_name>
        <root>/dev/sda1</root>
        <type>image</type>
      </section>
      <section>
        <append>resume=/dev/sda2  splash=silent showopts</append>
        <initrd>/boot/initrd-xen</initrd>
        <kernel>/boot/vmlinuz-xen</kernel>
        <lines_cache_id>3</lines_cache_id>
        <name>Xen -- </name>
        <original_name>Xen -- </original_name>
        <root>/dev/sda1</root>
        <type>image</type>
        <xen>/boot/xen.gz</xen>
        <xen_append></xen_append>
      </section>
    </sections>
  </bootloader>
  <general>
    <mode>
      <confirm config:type="boolean">false</confirm>
    </mode>
    <mouse>
      <id>none</id>
    </mouse>
    <signature-handling/>
  </general>
  <groups config:type="list"/>
  <networking>
    <dhcp_options>
      <dhclient_additional_options></dhclient_additional_options>
      <dhclient_client_id></dhclient_client_id>
      <dhclient_hostname_option>AUTO</dhclient_hostname_option>
    </dhcp_options>
    <dns>
      <dhcp_hostname config:type="boolean">true</dhcp_hostname>
      <dhcp_resolv config:type="boolean">true</dhcp_resolv>
      <domain>site</domain>
      <hostname>linux-uqg5</hostname>
      <nameservers config:type="list">
        <nameserver>192.168.16.254</nameserver>
        <nameserver>212.117.68.10</nameserver>
        <nameserver>212.117.64.86</nameserver>
      </nameservers>
      <searchlist config:type="list">
        <search>mwrl.net</search>
      </searchlist>
    </dns>
    <interfaces config:type="list">
      <interface>
        <bootproto>dhcp</bootproto>
        <device>eth-id-00:14:c2:3d:2c:a2</device>
        <name>Compaq NC7782 Gigabit Server Adapter (PCI-X,
10,100,1000-T)</name>
        <netmask>255.255.255.0</netmask>
        <startmode>auto</startmode>
        <usercontrol>no</usercontrol>
      </interface>
    </interfaces>
    <managed config:type="boolean">false</managed>
    <modules config:type="list">
      <module_entry>
        <device>bus-pci-0000:02:02.0</device>
        <module>tg3</module>
        <options></options>
      </module_entry>
    </modules>
    <routing>
      <ip_forward config:type="boolean">false</ip_forward>
    </routing>
  </networking>
  <nfs config:type="list">
    <nfs_entry>
      <mount_point>/home</mount_point>
      <nfs_options>defaults</nfs_options>
      <server_path>guam:/home</server_path>
    </nfs_entry>
    <nfs_entry>
      <mount_point>/data</mount_point>
      <nfs_options>defaults</nfs_options>
      <server_path>blade6:/mnt/san_v17</server_path>
    </nfs_entry>
  </nfs>
  <nis>
    <nis_broadcast config:type="boolean">false</nis_broadcast>
    <nis_broken_server config:type="boolean">false</nis_broken_server>
    <nis_by_dhcp config:type="boolean">false</nis_by_dhcp>
    <nis_domain>research.lab</nis_domain>
    <nis_local_only config:type="boolean">false</nis_local_only>
    <nis_options></nis_options>
    <nis_other_domains config:type="list"/>
    <nis_servers config:type="list">
      <nis_server>guam</nis_server>
    </nis_servers>
    <start_autofs config:type="boolean">false</start_autofs>
    <start_nis config:type="boolean">true</start_nis>
  </nis>
  <online_update>
    <autoget config:type="boolean">false</autoget>
    <enable_autoupdate config:type="boolean">true</enable_autoupdate>
    <skipPre config:type="boolean">true</skipPre>
    <update_time>
      <day config:type="integer">0</day>
      <hour config:type="integer">0</hour>
      <minute config:type="integer">0</minute>
      <random_time config:type="boolean">true</random_time>
      <timing>weekly</timing>
    </update_time>
  </online_update>
  <partitioning config:type="list">
    <drive>
      <device>/dev/sda</device>
      <partitions config:type="list">
        <partition>
          <filesystem config:type="symbol">reiser</filesystem>
          <format config:type="boolean">true</format>
          <mount>/</mount>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">1</partition_nr>
          <partition_type>primary</partition_type>
          <size>7304015872</size>
        </partition>
        <partition>
          <filesystem config:type="symbol">swap</filesystem>
          <format config:type="boolean">true</format>
          <mount>swap</mount>
          <partition_id config:type="integer">130</partition_id>
          <partition_nr config:type="integer">2</partition_nr>
          <partition_type>primary</partition_type>
          <size>1077511168</size>
        </partition>
      </partitions>
      <use>all</use>
    </drive>
  </partitioning>
  <report>
    <errors>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </errors>
    <messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </messages>
    <warnings>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </warnings>
    <yesno_messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </yesno_messages>
  </report>
  <runlevel>
    <default>3</default>
  </runlevel>
  <software>
    <addons config:type="list">
      <addon>X11</addon>
      <addon>Min</addon>
    </addons>
    <base>Minimal+X11</base>
    <packages config:type="list">
      <package>yast2-trans-en_US</package>
(...)
      <package>xen</package>
    </packages>
  </software>
  <user_defaults>
    <expire></expire>
    <group>100</group>
    <groups>video,dialout</groups>
    <home>/home</home>
    <inactive>-1</inactive>
    <shell>/bin/bash</shell>
    <skel>/etc/skel</skel>
  </user_defaults>
  <users config:type="list">
        <user>
            <encrypted config:type="boolean">false</encrypted>
            <user_password>(..)</user_password>
            <username>root</username>
        </user>
    </users>
</profile>

--
Jan Steinkuehler
Ericsson Research

Ericsson GmbH, Eurolab
EDD/XR/N
Ericsson Allee 1
D-52134 Herzogenrath
jan.steinkuehler@ericsson.com

"No products to register" after autoyast installation

Jan Steinkuehler (AC/EDD)