Hi, I'm having a "small" problem concerning PXE installation. The installation and everything works fine But as it comes to a reboot of the machine the installation starts again. Ok that's still ok, because the pxe setup has to be changed to local boot for the client. But I don't want to do it by hand, cause for more than 200 clients it is a litle bit to much work. In the autoyast manual it is recommended to check the syslog for an initial transmitted RAM disk. The problem is that I can't find the appropriate line, even if I start the tftp-servecie with -v option. Could anyone give some advice, how to configure the tftpd and how to scan the syslog (example shell/perlscript ??)? Any help would be appreciated. cheers fp +----------------------------------------------------------+ | Max-Planck-Institut für Radioastronomie | | Abt.1 (wissenschaftliche DV) | | | | Frank Pascher | +----------------------------------------------------------+ | Auf dem Huegel 69 Tel.: +49 (228) 525 359 | | 53121 Bonn Fax.: +49 (228) 535 229 | +----------------------------------------------------------+ | Email: mailto:fpascher@mpifr-bonn.mpg.de | | WWW: http://www.mpifr-bonn.mpg.de | | PGP Fingerprint: 13D1 8C86 57B3 2850 F158 4879 E5F3 7E20 | +----------------------------------------------------------+