Hi Guys, I still having problem using autoinstall on SuSE 10 PPC on IBM LPAR. I have tftpboot set up pointing to inst64 image and parameters passed: mkzimage_cmdline -a 1 -c -s "insmod=ibmveth hostip=10.1.245.201 netmask=255.255.0.0 install=nfs://10.1.5.130/images/SUSE10PPC autoyast=nfs://10.1.5.130/images/SUSE10PPC/autoinst.xml" inst64 I use a very simple profile file (I've tried a few combinations): <?xml version="1.0"?> <!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd"> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <partitioning config:type="list"> <drive> <use>all</use> </drive> </partitioning> <software> <base>default</base> </software> <users config:type="list"> <user> <encrypted config:type="boolean">false</encrypted> <user_password>test123</user_password> <username>root</username> </user> </users> </profile> The partition boots, and I can see in the logs that the NFS partition gets mounted and the a get the error below. Search on Google for the error didn't shed any light on the source of the problem. [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.16.21-0.8-ppc64 (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon Jul 3 18:25:39 UTC 2006 [boot]0012 Setup Arch Node 0 Memory: Node 1 Memory: Node 2 Memory: 0x0-0x28000000 Node 3 Memory: 0x28000000-0x40000000 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 7168 bytes Using shared processor idle loop [boot]0015 Setup Done Built 4 zonelists Kernel command line: insmod=ibmveth hostip=10.1.245.201 netmask=255.255.0.0 install=nfs://10.1.5.130/images/SUSE10PPC autoyast=nfs://10.1.5.130/images/SUSE10PPC/autoinst.xml [boot]0020 XICS Init xics: no ISA interrupt controller [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 238.055000 MHz . . . . Found a kterm terminal on /dev/console (80 columns x 24 lines). *** Starting YaST2 *** /usr/lib/YaST2/startup/YaST2.call: line 306: 2938 Aborted (core dumped) $OPT_FBITERM y2base "$Y2_MODULE_NAME" $Y2_MODE_FLAGS $Y2_MODULE_ARGS $Y2_MODE $Y2_UI_ARGS *** An error occurred during the installation. Any ideas? Thanks in advance, Gabriel