"Stephens, Bill PBSG" <Bill.Stephens@pbsg.com> 24/01/2008 17:06 >>> Is there a way to set up 2 bond networks using 4 nic's through autoyast, without knowing the macaddresses ahead of time? Our config is 2 broadcom onboard nics, and a dual port Intel PCI nic. The goal is to bond the first ports (eth0 and eth2) to our intranet lan, and the second
AFAIK has each NIC vendor its own range of mac address. Thus if you know the vendor you can figured out the starting of the mac address and create a rule on that. I do not know if autoyast is able to create bonded network channels at all.. ports (eth1 and 3) to a private subnet. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org