Hi, Nishanth Menon, could you email me an workable zImage and dtb files for the B3 version the lateset factory 13.1 still cann't boot: openSUSE-Factory-ARM-JeOS-panda.armv7l-1.12.1-Build172.16.raw.xz U-Boot 2014.01 (Feb 05 2014 - 15:07:29) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment Net: No ethernet found. Hit any key to stop autoboot: 0 mmc0 is current device SD/MMC found on device 0 2127 bytes read in 3 ms (692.4 KiB/s) Running bootscript from mmc0 ... ## Executing script at 82000000 mmc0 is current device 4690024 bytes read in 215 ms (20.8 MiB/s) 68836649 bytes read in 3096 ms (21.2 MiB/s) 23288 bytes read in 6 ms (3.7 MiB/s) Kernel image @ 0x80000000 [ 0x000000 - 0x479068 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 68836585 Bytes = 65.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f88af7 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.3-1-default (geeko@buildhost) (gcc version 4.8.2 20140117 [gcc-4_8-branch revision 206703] (SUSE Linux) ) #1 SMP Fri Feb 14 12:50:30 ) [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP4 PandaBoard [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1796000 s14464 r8192 d14208 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: plymouth.enable=0 console=ttyO2 vram=16M showopts [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 941832K/1047552K available (5992K kernel code, 712K rwdata, 2604K rodata, 570K init, 964K bss, 105720K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc086e1f8 (8601 kB) [ 0.000000] .init : 0xc086f000 - 0xc08fd880 ( 571 kB) [ 0.000000] .data : 0xc08fe000 - 0xc09b0060 ( 713 kB) [ 0.000000] .bss : 0xc09b0060 - 0xc0aa122c ( 965 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=5 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] GIC physical location is 0x48241000 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating local timer... 349.06MHz. [ 0.059906] Calibrating delay loop... 1391.00 BogoMIPS (lpj=6955008) [ 0.099853] pid_max: default: 32768 minimum: 301 [ 0.100006] Security Framework initialized [ 0.100067] AppArmor: AppArmor initialized [ 0.100219] Mount-cache hash table entries: 512 [ 0.104614] Initializing cgroup subsys memory [ 0.104644] Initializing cgroup subsys devices [ 0.104644] Initializing cgroup subsys freezer [ 0.104644] Initializing cgroup subsys net_cls [ 0.104675] Initializing cgroup subsys blkio [ 0.104675] Initializing cgroup subsys perf_event [ 0.104766] CPU: Testing write buffer coherency: ok [ 0.105072] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.105133] Setting up static identity map for 0x805ad428 - 0x805ad480 [ 0.105316] L310 cache controller enabled [ 0.105346] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB [ 0.110351] CPU1: Booted secondary processor [ 0.149688] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.149810] Brought up 2 CPUs [ 0.149841] SMP: Total of 2 processors activated. [ 0.149841] CPU: All CPU(s) started in SVC mode. [ 0.150451] devtmpfs: initialized [ 0.153686] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.154296] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.154693] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.218505] pinctrl core: initialized pinctrl subsystem [ 0.218780] regulator-dummy: no parameters [ 0.220123] NET: Registered protocol family 16 [ 0.222930] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.223602] cpuidle: using governor ladder [ 0.223632] cpuidle: using governor menu [ 0.236450] OMAP GPIO hardware version 0.1 [ 0.240203] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.248962] No ATAGs? [ 0.248992] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.248992] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.249603] omap_init_mbox: hwmod doesn't have valid attrs [ 0.250213] OMAP DMA hardware revision 0.0 [ 0.251312] Serial: AMBA PL011 UART driver [ 0.257202] bio: create slab <bio-0> at 0 [ 0.258666] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.258666] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.269958] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.270538] hsusb1_reset: 3300 mV [ 0.270782] hsusb1_vbus: 3300 mV [ 0.270843] reg-fixed-voltage wl12xx_vmmc.11: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 0.270874] platform wl12xx_vmmc.11: Driver reg-fixed-voltage requests probe deferral [ 0.273742] SCSI subsystem initialized [ 0.274169] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 0.274169] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.274200] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 0.274230] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 0.274230] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 0.274261] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.274261] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 0.274291] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 0.275604] NetLabel: Initializing [ 0.275634] NetLabel: domain hash size = 128 [ 0.275634] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.275695] NetLabel: unlabeled traffic allowed by default [ 0.275817] Switched to clocksource 32k_counter [ 0.287536] AppArmor: AppArmor Filesystem Enabled [ 0.297760] NET: Registered protocol family 2 [ 0.298431] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.298522] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.298645] TCP: Hash tables configured (established 8192 bind 8192) [ 0.298736] TCP: reno registered [ 0.298767] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.298797] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.299133] NET: Registered protocol family 1 [ 0.300415] Unpacking initramfs... [ 5.699707] Freeing initrd memory: 67216K (c2001000 - c61a5000) [ 5.699798] NetWinder Floating Point Emulator V0.97 (extended precision) [ 5.700164] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 5.701782] Initialise system trusted keyring [ 5.702026] audit: initializing netlink socket (disabled) [ 5.702056] type=2000 audit(5.685:1): initialized [ 5.885559] bounce pool size: 64 pages [ 5.885864] zbud: loaded [ 5.886169] VFS: Disk quotas dquot_6.5.2 [ 5.886322] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.886871] msgmni has been set to 1476 [ 5.887054] Key type big_key registered [ 5.887878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 5.888000] io scheduler noop registered [ 5.888000] io scheduler deadline registered [ 5.888031] io scheduler cfq registered (default) [ 5.889343] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 5.889526] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 5.891235] OMAP DSS rev 4.0 [ 5.892608] connector-dvi connector-dvi.0: Failed to get I2C adapter, bus 2 [ 5.892639] platform connector-dvi.0: Driver connector-dvi requests probe deferral [ 5.893676] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 5.899993] Serial: IMX driver [ 5.900543] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 5.901031] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 5.901458] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 6.733825] console [ttyO2] enabled [ 6.737915] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 6.748352] Non-volatile memory driver v1.3 [ 6.752777] [drm] Initialized drm 1.1.0 20060810 [ 6.759796] mousedev: PS/2 mouse device common for all mice [ 6.770233] ledtrig-cpu: registered to indicate activity on CPUs [ 6.776580] hidraw: raw HID events driver (C) Jiri Kosina [ 6.783264] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.790191] [drm] No driver support for vblank timestamp query. [ 6.796386] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 6.803527] TCP: cubic registered [ 6.807067] NET: Registered protocol family 10 [ 6.812469] Key type dns_resolver registered [ 6.817230] cpu cpu0: dummy supplies not allowed [ 6.822052] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 6.827941] cpufreq_cpu0: failed to get cpu0 clock: -2 [ 6.833312] cpufreq-cpu0: probe of cpufreq-cpu0.0 failed with error -2 [ 6.840240] Power Management for TI OMAP4+ devices. [ 6.845367] Power Management for TI OMAP4. [ 6.849639] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 6.856994] big.LITTLE switcher initializing [ 6.856994] bL_switcher_halve_cpus: no CPU pairing possible [ 6.867309] big.LITTLE switcher initialization failed [ 6.867309] SmartReflex Class3 initialized [ 6.877349] Loading compiled-in X.509 certificates [ 6.877349] registered taskstats version 1 [ 6.886779] AppArmor: AppArmor sha1 policy hashing enabled [ 6.893218] omapdrm omapdrm.0: DMM not available, disable DMM support [ 6.900115] omapdss HDMI error: can't get VDDA_HDMI_DAC regulator [ 6.906585] omapdrm omapdrm.0: could not connect display: hdmi [ 6.913024] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.920013] [drm] No driver support for vblank timestamp query. [ 6.926239] omapdrm omapdrm.0: No connectors reported connected with modes [ 6.926330] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.961364] Console: switching to colour frame buffer device 128x48 [ 6.970214] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 6.984313] omapdrm omapdrm.0: registered panic notifier [ 6.984313] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [ 6.996093] Error: Driver 'tfp410' is already registered, aborting... [ 7.003875] vwl1271: 1800 mV [ 7.014862] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 7.024780] twl 0-0048: PIH (irq 39) nested IRQs [ 7.031158] twl_rtc rtc.12: Enabling TWL-RTC [ 7.038391] twl_rtc rtc.12: rtc core: registered rtc.12 as rtc0 [ 7.045166] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 7.051177] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 7.057189] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 7.063171] VMMC: 1200 <--> 3000 mV at 3000 mV [ 7.068603] VPP: 1800 <--> 2500 mV at 1900 mV [ 7.073974] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 7.079010] VDAC: 1800 mV [ 7.079376] VANA: 2100 mV [ 7.086059] VCXIO: 1800 mV [ 7.086090] VUSB: 3300 mV [ 7.092864] V1V8: 1800 mV [ 7.096374] V2V1: 2100 mV [ 7.108398] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 7.115051] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 7.127166] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 7.133422] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 7.140411] twl_rtc rtc.12: setting system clock to 2000-01-01 00:09:05 UTC (946685345) [ 7.148834] sr_init: No PMIC hook to init smartreflex [ 7.148895] sr_init: platform driver register failed for SR [ 7.160156] imx-drm imx-drm: No connectors reported connected with modes [ 7.165802] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.180023] imx-drm imx-drm: fb1: frame buffer device [ 7.185852] omap_uart 48020000.serial: no wakeirq for uart2 [ 7.192291] Freeing unused kernel memory: 568K (c086f000 - c08fd000) [ 8.136169] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 8.175994] hw-breakpoint: CPU 0 failed to disable vector catch setterm: cannot (un)set powersave mode: Inappropriate ioctl for device /usr/sbin/klogconsole Thu Feb 27 00:00:00 UTC 2014 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org