[opensuse-arm] imx6 (sabrelite) Ethernet problem
Hi, I am testing the latest Tumbleweed image on the Sabrelite (imx6q board) and the board freeze if I plug an Ethernet cable! And as soon as I unplug the cable, the board reboot. If I do a 'ifconfig eth0 down' before plugging the cable, all is fine, until I run 'ifconfig eth0 up'. So, I guess it is a driver problem. Does anyone already see a similar problem with imx6 boards? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
El 2017-01-13 15:45, Guillaume Gardet escribió:
Hi,
I am testing the latest Tumbleweed image on the Sabrelite (imx6q board) and the board freeze if I plug an Ethernet cable! And as soon as I unplug the cable, the board reboot.
If I do a 'ifconfig eth0 down' before plugging the cable, all is fine, until I run 'ifconfig eth0 up'. So, I guess it is a driver problem.
Does anyone already see a similar problem with imx6 boards?
Hi, Mine (Udoo, imx6q) works fine, but it needs a patch that is not yet in mainline[1]. Don't know if that patch is needed for the Sabrelite too. 1: https://lkml.org/lkml/2016/8/15/136 -- Cheers
Hi, Am 13.01.2017 um 15:45 schrieb Guillaume Gardet:
I am testing the latest Tumbleweed image on the Sabrelite (imx6q board) and the board freeze if I plug an Ethernet cable! And as soon as I unplug the cable, the board reboot.
If I do a 'ifconfig eth0 down' before plugging the cable, all is fine, until I run 'ifconfig eth0 up'. So, I guess it is a driver problem.
Does anyone already see a similar problem with imx6 boards?
I am observing my Udoo Neo getting stuck on boot, whether the network cable is in or not. Happens with all of 4.9.0 and 4.10.rc3 and 4.10.rc3.next.20170112 but not with my old self-built linux-next kernel. As this is a new .dts, it might be an unrelated problem. But since you say you are testing the latest image, can you try enabling USE_EFI for sabrelite please? Works fine on the Udoo Neo. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Andreas Färber
-
Guillaume Gardet
-
Oscar C