Up& running now with the new u-boot , thanks! Have ethernet, plasma Don't have wifi, sound Let's way for further improvements Regards El jue., 26 nov. 2020 9:55, Nicolas Saenz Julienne escribió:

Hi,

On Thu, 2020-11-26 at 09:41 +0100, Giant Sand Fans wrote:

...

Hi, I've tried opensuse tumbleweed and leap and both have problems , tumbleweed doesn't boot (endless loop with some lines that cannot read) and leap got kde log screen but then neither keyboard and mouse don't work.

Any suggestions?

We're still working on getting support for Pi400. In the meantime you can try replacing the u-boot.bin file in your sd card's EFI partition with the one I attached.

Regards, Nicolas

On Fri, 2020-11-27 at 10:02 +0100, Giant Sand Fans wrote:

Up& running now with the new u-boot , thanks! Have ethernet, plasma  Don't have wifi, sound

Yes Wifi it's just missing a firmware file, which will be soon available. If you're interested I can provide some instructions on how to get it in place. As for HDMI sound, it'll be available once v5.10 of Linux is released. Regards, Nicolas

Sure, I'll try that firmware with your instructions. Regarding the sound , hdmi sound means no usb/jack/... sound ? El vie., 27 nov. 2020 10:55, Nicolas Saenz Julienne escribió:

On Fri, 2020-11-27 at 10:02 +0100, Giant Sand Fans wrote:

...

Up& running now with the new u-boot , thanks! Have ethernet, plasma Don't have wifi, sound

Yes Wifi it's just missing a firmware file, which will be soon available. If you're interested I can provide some instructions on how to get it in place. As for HDMI sound, it'll be available once v5.10 of Linux is released.

Regards, Nicolas

On Fri, 2020-11-27 at 12:46 +0100, Giant Sand Fans wrote:

Sure, I'll try that firmware with your instructions.

I attached an rpm package which contains the firmware files. It'll hopefully be available in the Tumbleweed repos, and through upgrades in a week or two. You can install it by running: zypper in --oldpackage bcm43xx-firmware-20180314-45.1.noarch.rpm

Regarding the sound , hdmi sound means no usb/jack/... sound ?

Well Pi400 has no jack, so that shouldn't be a problem. USB sound should work (as in an external USB sound card). Once Linux v5.10 shows up, if you're using some other means for sound you'll have to configure it the same way you'd do it on an intel machine. Regards, Nicolas