Testing Leap 15.3 on a Raspi4
Greetings, I wrote a post on the blog of our association yesterday regarding the Beta that came out on the 3rd March. I grabbed the ISO and burnt it to a USB key with Etcher. Could not get it to boot as per https://en.opensuse.org/HCL:AArch64_EFI so went into the process via Raspbian to update eeprom: sudo rpi-eeprom-update -d -f /lib/firmware/raspberrypi/bootloader/latest/pieeprom-2021-02-16.bin OK, update went fine and checked with: vcgencmd bootloader_version Now, it appears that there might be some more steps, I also used RASPI-CONFIG to set boot order with USB as priority instead of SD. Has someone created a RASPI4 image by any chance please? Best wishes, Jimmy
Am Donnerstag, 11. März 2021, 12:38:54 CET schrieb jimmypierre.rouen.france@gmail.com:
Has someone created a RASPI4 image by any chance please?
I have made one for our (GNUHealth) testing, feel free to download: https://www.axxite.com/gnuhealth38-Leap15.3-raspi4-20210308.img.xz Cheers Axel PS: Sound enabled ;-)
Hi Jimmy,
-----Original Message----- From: jimmypierre.rouen.france@gmail.com <jimmypierre.rouen.france@gmail.com> Sent: 11 March 2021 12:39 To: arm@lists.opensuse.org Subject: Testing Leap 15.3 on a Raspi4
Greetings,
I wrote a post on the blog of our association yesterday regarding the Beta that came out on the 3rd March.
I grabbed the ISO and burnt it to a USB key with Etcher.
Could not get it to boot as per https://en.opensuse.org/HCL:AArch64_EFI so went into the process via Raspbian to update eeprom:
sudo rpi-eeprom-update -d -f /lib/firmware/raspberrypi/bootloader/latest/pieeprom-2021-02-16.bin
OK, update went fine and checked with:
vcgencmd bootloader_version
Now, it appears that there might be some more steps, I also used RASPI-CONFIG to set boot order with USB as priority instead of SD.
I did not try to boot the ISO on Raspberry Pi yet. But that should work since the ISO should be a hybrid ISO, able to boot on Raspberry Pi 3/4.
Has someone created a RASPI4 image by any chance please?
The official Raspberry Pi image (for RPi3 and RPi4) for upcoming Leap 15.3 is available here: http://download.opensuse.org/distribution/leap/15.3/appliances/openSUSE-Leap... Cheers, Guillaume IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Op donderdag 11 maart 2021 13:14:31 CET schreef Guillaume Gardet:
Hi Jimmy,
The official Raspberry Pi image (for RPi3 and RPi4) for upcoming Leap 15.3 is available here: http://download.opensuse.org/distribution/leap/15.3/appliances/openSUSE-Lea p-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz
Cheers, Guillaume
I got a 404 on this URL. -- fr.gr. member openSUSE Freek de Kruijf
Hi,
-----Original Message----- From: Freek de Kruijf <freek@opensuse.org> Sent: 11 March 2021 14:33 To: arm@lists.opensuse.org Subject: Re: Testing Leap 15.3 on a Raspi4
Op donderdag 11 maart 2021 13:14:31 CET schreef Guillaume Gardet:
Hi Jimmy,
The official Raspberry Pi image (for RPi3 and RPi4) for upcoming Leap 15.3 is available here: http://download.opensuse.org/distribution/leap/15.3/appliances/openSUS E-Lea p-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz
Cheers, Guillaume
I got a 404 on this URL.
This is likely a mirror issue. You can try this mirror: http://opensuse.mirrors.proxad.net/opensuse/distribution/leap/15.3/appliance... Cheers, Guillaume IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Op donderdag 11 maart 2021 14:47:16 CET schreef u:
Hi,
-----Original Message----- From: Freek de Kruijf <freek@opensuse.org> Sent: 11 March 2021 14:33 To: arm@lists.opensuse.org Subject: Re: Testing Leap 15.3 on a Raspi4
Op donderdag 11 maart 2021 13:14:31 CET schreef Guillaume Gardet:
Hi Jimmy,
The official Raspberry Pi image (for RPi3 and RPi4) for upcoming Leap 15.3 is available here: http://download.opensuse.org/distribution/leap/15.3/appliances/openSUS E-Lea p-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz
Cheers, Guillaume
I got a 404 on this URL.
This is likely a mirror issue. You can try this mirror: http://opensuse.mirrors.proxad.net/opensuse/distribution/leap/15.3/applianc es/openSUSE-Leap-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz
Tested the XFCE and KDE image. @XFCE: expanding the partition ROOT was only partly done. The system started with the original size. Not sure if after a reboot this partition was at the maximum size. @KDE: no login screen like Tumbleweed. Currently nothing for this system on packman. -- fr.gr. member openSUSE Freek de Kruijf
Hi, Am Freitag, 12. M?rz 2021, 18:16:00 CET schrieb Freek de Kruijf:
Op donderdag 11 maart 2021 14:47:16 CET schreef u:
This is likely a mirror issue. You can try this mirror: http://opensuse.mirrors.proxad.net/opensuse/distribution/leap/15.3/applianc es/openSUSE-Leap-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz
Tested the XFCE and KDE image. @XFCE: expanding the partition ROOT was only partly done. The system started with the original size. Not sure if after a reboot this partition was at the maximum size.
That's https://bugzilla.suse.com/show_bug.cgi?id=1182963, a fix is on the way. Cheers, Fabian
@KDE: no login screen like Tumbleweed. Currently nothing for this system on packman.
Greetings, Not sure if the following is a bug, or it's me! Thanks to Axel who shared his 32GB image with me. Despite several attempts, the burning failed. For Guillaume, thanks for the link, I figured out the mirror issue BTW, the live image would start alright but would not install nor upgrade. So I went for the "migration" path. I grabbed a openSUSE 15.2 image and used the ISO to boot and migrated. It took all night. I just checked, ssh worked and I can ping domains on the Internet and FireFox works well.. Now serious matters : ***************** os152:~ # zypper ref ***************** Warning: The /etc/products.d/baseproduct symlink is dangling or missing! The link must point to your core products .prod file in /etc/products.d. Repository 'openSUSE-Leap-15.3-1' is up to date. Repository 'Non-OSS Repository' is up to date. Repository 'Main Repository' is up to date. Repository 'Main Update Repository' is up to date. Repository 'Update Repository (Non-Oss)' is up to date. All repositories have been refreshed. ***************** os152:~ # zypper up ***************** Warning: The /etc/products.d/baseproduct symlink is dangling or missing! The link must point to your core products .prod file in /etc/products.d. The target filesystem is mounted as read-only. Please make sure the target filesystem is writeable. os152:~ # ************************** Yast2 : System Keyboard Layout ************************** ===> French Keyboard Caller: /usr/lib64/ruby/gems/2.5.0/gems/cheetah-0.5.2/lib/cheetah.rb:670:in `check_errors' Details: Execution of "localectl set-keymap fr-latin1" failed with status 1: Failed to set keymap: Failed to set virtual console keymap: Read-only file system.system) ***************** 19 Updates available ***************** Subprocess failed. Error: RPM failed: error: can't create transaction lock on /usr/lib/sysimage/rpm/.rpm.lock (Read-only file system) Does all this ring a bell please? Cheers, Jimmy
Hello Jimmy, Am Samstag, 13. März 2021, 11:45:53 CET schrieb jimmypierre.rouen.france@gmail.com:
Not sure if the following is a bug, or it's me! Thanks to Axel who shared his 32GB image with me. Despite several attempts, the burning failed.
Sorry to hear. I just x-checked with a second SD card, and that one worked as well. To burn the image: xzcat gnuhealth38-Leap15.3-raspi4-20210308.img.xz | dd bs=4M of=/dev/mmcblk0 iflag=fullblock oflag=direct status=progress; sync (resp. check with lsblk where your SD card is) Check the md5 sum. it should be: e0d51c1746e240655268fe0267cb409d gnuhealth38-Leap15.3-raspi4-20210308.img.xz HTH Axel
Greetings, @Axel : I have news for you, I guessed that my stock of 32 GB USB keys are KO. I discovered that there was a new version, so I downloaded the Beta image directly. Installation went fine, and no errors were detected as previously. So, I am quite happy for now. I have not deleted old installation though. Thanking you! Best wishes, Jimmy
On 11/03/2021 14:32, Freek de Kruijf wrote:
Op donderdag 11 maart 2021 13:14:31 CET schreef Guillaume Gardet:
Hi Jimmy,
The official Raspberry Pi image (for RPi3 and RPi4) for upcoming Leap 15.3 is available here: http://download.opensuse.org/distribution/leap/15.3/appliances/openSUSE-Lea p-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz
Cheers, Guillaume
I got a 404 on this URL.
I just tested and it worked. Please retry and make sure the URL is not broken up in two. Regards, Matthias
participants (6)
-
Axel Braun -
Fabian Vogt -
Freek de Kruijf -
Guillaume Gardet -
jimmypierre.rouen.france＠gmail.com -
Matthias Brugger