[opensuse-arm] Raspberry Pi3 fail to boot
Hello, the last Tumbleweed image[1] of Raspberry Pi 3 fails to boot with the message: [ 5.646965] Initramfs unpacking failed: write error [ 5.901972] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 5.901972] [ 5.911609] CPU: 2 PID: 1 Comm: init Not tainted 4.14.4-1-default #1 [ 5.918290] Hardware name: raspberrypi rpi/rpi, BIOS 2017.11 11/16/2017 [ 5.925244] Call trace: [ 5.927832] [<ffff000008089ea8>] dump_backtrace+0x0/0x248 [ 5.933514] [<ffff00000808a114>] show_stack+0x24/0x30 [ 5.938833] [<ffff0000089192d4>] dump_stack+0x9c/0xc0 [ 5.944149] [<ffff0000080ce688>] panic+0x12c/0x2ac [ 5.949193] [<ffff0000080d3b04>] do_exit+0x99c/0x9a0 [ 5.954417] [<ffff0000080d3b98>] do_group_exit+0x40/0xb0 [ 5.960008] [<ffff0000080e021c>] get_signal+0x2dc/0x548 [ 5.965505] [<ffff000008089178>] do_signal+0x70/0x3f0 [ 5.970820] [<ffff000008089770>] do_notify_resume+0xd0/0x120 [ 5.976772] Exception stack(0xffff00000802bec0 to 0xffff00000802c000) [ 5.983547] bec0: 0000ffffaa00b688 0000000000000000 0000000000000978 0000ffffaa00b680 [ 5.991781] bee0: 0000ffffaa00c000 0000ffffaa00b688 0000000000000003 756e696c65736269 [ 6.000016] bf00: 00000000000000de 0000fffff5ec40e0 0000000000042a98 000000000002f000 [ 6.008251] bf20: 0000fffff5ec40e0 0000000000040688 0000ffffaa2908f8 0000000000000887 [ 6.016484] bf40: 0000ffffaa290f88 0000ffffaa276c18 0000000000000001 0000000000000000 [ 6.024718] bf60: 0000000000000004 0000ffffaa290000 0000000000000000 0000000000000002 [ 6.032952] bf80: 0000ffffaa28cc20 0000fffff5ec40b0 0000fffff5ec4490 0000fffff5ec44d0 [ 6.041186] bfa0: 0000000000000002 0000fffff5ec4240 0000ffffaa26679c 0000fffff5ec4080 [ 6.049421] bfc0: 0000ffffaa27924c 0000000020000000 0000ffffaa00a000 00000000ffffffff [ 6.057655] bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.065890] [<ffff0000080836c0>] work_pending+0x8/0x10 [ 6.071299] SMP: stopping secondary CPUs [ 6.075431] Kernel Offset: disabled [ 6.079100] CPU features: 0x002004 [ 6.082675] Memory Limit: none [ 6.085893] Rebooting in 90 seconds.. [1] openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3.aarch64-2017.12.04-Build2.8.raw.xz Regards, Manu
On 10.12.17 17:08, Manu Maier wrote:
Hello,
the last Tumbleweed image[1] of Raspberry Pi 3 fails to boot with the message:
[ 5.646965] Initramfs unpacking failed: write error
That sounds like the initrd grew too big? Can you check out the initrd on the image with lsinitrd and see if you can find new files that might have caused this? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hello Alex, i found in the initrd.vmx python3.6 (about 30MiB) that was not present in a previous version. Regards, Manu Am 11.12.2017 um 09:51 schrieb Alexander Graf:
On 10.12.17 17:08, Manu Maier wrote:
Hello,
the last Tumbleweed image[1] of Raspberry Pi 3 fails to boot with the message:
[ 5.646965] Initramfs unpacking failed: write error That sounds like the initrd grew too big? Can you check out the initrd on the image with lsinitrd and see if you can find new files that might have caused this?
Alex
N�����r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�����Ǩ�
Op maandag 11 december 2017 11:02:41 CET schreef Manu Maier:
Hello Alex,
i found in the initrd.vmx python3.6 (about 30MiB) that was not present in a previous version.
Regards, Manu
Am 11.12.2017 um 09:51 schrieb Alexander Graf:
On 10.12.17 17:08, Manu Maier wrote:
Hello,
the last Tumbleweed image[1] of Raspberry Pi 3 fails to boot with the message:
[ 5.646965] Initramfs unpacking failed: write error
That sounds like the initrd grew too big? Can you check out the initrd on the image with lsinitrd and see if you can find new files that might have caused this?
Alex
N�����r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�������Ǩ�
I just tried openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3.aarch64-2017.12.04-Build4.5.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ RaspberryPi3/images No problems booting this image. Do not update kernel-default to 4.14.1-1.3, this gives problems with DMA (buffer full). -- fr.gr. Freek de Kruijf member openSUSE -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Alexander Graf -
Freek de Kruijf -
Manu Maier