[opensuse-arm] Raspberry Pi Zero boot broken after update
Hi, Updating my Raspberry Pi Zero to latest Tumbleweed plus staging U-Boot, I get an exception in GRUB. Could this be related to the native builds? U-Boot 2017.07-rc3 (Jul 10 2017 - 12:54:03 +0000) DRAM: 416 MiB RPI Zero (0x900093) MMC: sdhci@7e300000: 0 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 21968 bytes read in 249 ms (85.9 KiB/s) Found EFI removable media binary efi/boot/bootarm.efi reading efi/boot/bootarm.efi 105984 bytes read in 30 ms (3.4 MiB/s) ## Starting EFI application at 01000000 ... Scanning disk sdhci@7e300000.blk... Found 1 disks Welcome to GRUB! data abort pc : [<18b36628>] lr : [<18b4e178>] reloc pc : [<febda628>] lr : [<febf2178>] sp : 19b5c150 ip : 00000074 fp : 00000001 r10: 18b58cb8 r9 : 00000000 r8 : 18b360e4 r7 : 18b36080 r6 : 00000000 r5 : 18b36978 r4 : 19b5c290 r3 : 00000000 r2 : 00000000 r1 : 18b4e478 r0 : 18b36080 Flags: nZCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Am 23.07.2017 um 03:20 schrieb Andreas Färber <afaerber@suse.de>:
Hi,
Updating my Raspberry Pi Zero to latest Tumbleweed plus staging U-Boot, I get an exception in GRUB. Could this be related to the native builds?
U-Boot 2017.07-rc3 (Jul 10 2017 - 12:54:03 +0000)
DRAM: 416 MiB RPI Zero (0x900093) MMC: sdhci@7e300000: 0 reading uboot.env
** Unable to read "uboot.env" from mmc0:1 ** Using default environment
In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 21968 bytes read in 249 ms (85.9 KiB/s) Found EFI removable media binary efi/boot/bootarm.efi reading efi/boot/bootarm.efi 105984 bytes read in 30 ms (3.4 MiB/s) ## Starting EFI application at 01000000 ... Scanning disk sdhci@7e300000.blk... Found 1 disks Welcome to GRUB!
data abort
Data abort does not sound like an illegal instruction - hmm
pc : [<18b36628>] lr : [<18b4e178>] reloc pc : [<febda628>] lr : [<febf2178>]
If I had to guess I'd say this is within the grub binary. Alex
sp : 19b5c150 ip : 00000074 fp : 00000001 r10: 18b58cb8 r9 : 00000000 r8 : 18b360e4 r7 : 18b36080 r6 : 00000000 r5 : 18b36978 r4 : 19b5c290 r3 : 00000000 r2 : 00000000 r1 : 18b4e478 r0 : 18b36080 Flags: nZCv IRQs off FIQs off Mode SVC_32 Resetting CPU ...
resetting ...
Regards, Andreas
-- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (2)
-
Alexander Graf -
Andreas Färber