[opensuse-arm] Problems with latest image openSUSE-Tumbleweed-JeOS.aarch64-15.1.0-RaspberryPi-Build62.3.raw.xz
The latest image for the Raspberry Pi 4B from Matthias Brugger appears to be very slow when installing packages. It shows a lot of errors like: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 8192 bytes), total 512 (slots), used 507 ... dec 03 17:59:27 localhost kernel: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 4096 bytes), total 512 (slots), used 511 ... I could not find a parameter to increase the buffers. Is it OK to report issues like these on this list? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On Wed, Jan 08, Freek de Kruijf wrote:
The latest image for the Raspberry Pi 4B from Matthias Brugger appears to be very slow when installing packages.
Matthias told you several times to use the official images, why are you still using this outdated ones?
It shows a lot of errors like: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 8192 bytes), total 512 (slots), used 507 ... dec 03 17:59:27 localhost kernel: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 4096 bytes), total 512 (slots), used 511 ...
I could not find a parameter to increase the buffers.
Is it OK to report issues like these on this list?
For this we have bugzilla, it's known and people are working on fixing it. Use the official images and you don't have this problems ;) Thorsten -- Thorsten Kukuk, Distinguished Engineer, Senior Architect SLES & MicroOS SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany Managing Director: Felix Imendoerffer (HRB 36809, AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op woensdag 8 januari 2020 15:56:55 CET schreef Thorsten Kukuk:
On Wed, Jan 08, Freek de Kruijf wrote:
The latest image for the Raspberry Pi 4B from Matthias Brugger appears to be very slow when installing packages.
Matthias told you several times to use the official images, why are you still using this outdated ones?
I do use the official ones also, but these are unusable; no ethernet, no keyboard and no mouse support; access only via a serial connection. This support should be available in kernel 5.4, which is used in the images of Matthias. I do see daily new images generated by Matthias, so I would not qualify these as outdated. In fact these are the ones that currently can be used on a RPi4B. I even did add enough packages to have a workable XFCE system and most likely could have a workable KDE system. It lacks however support for sound and support for video output is poor. To avoid the problem I reported on in this thread, I needed to convert the image of Matthias into a system without btrfs. I am using ext4 for BOOT and ROOT and added a xfs partition for /home.
It shows a lot of errors like: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 8192 bytes), total 512 (slots), used 507 ... dec 03 17:59:27 localhost kernel: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 4096 bytes), total 512 (slots), used 511 ...
I could not find a parameter to increase the buffers.
Is it OK to report issues like these on this list?
For this we have bugzilla, it's known and people are working on fixing it. Use the official images and you don't have this problems ;)
My only intention is to assist in getting a proper working system on the RPi4B. My understanding is that bugzilla is for the "official" images and not for the images Matthias is working on.
Thorsten
-- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On Thu, Jan 09, Freek de Kruijf wrote:
Op woensdag 8 januari 2020 15:56:55 CET schreef Thorsten Kukuk:
On Wed, Jan 08, Freek de Kruijf wrote:
The latest image for the Raspberry Pi 4B from Matthias Brugger appears to be very slow when installing packages.
Matthias told you several times to use the official images, why are you still using this outdated ones?
I do use the official ones also, but these are unusable; no ethernet, no keyboard and no mouse support; access only via a serial connection. This support should be available in kernel 5.4,
The official Pi4 images are using 5.4.7? which is used in the images of
Matthias. I do see daily new images generated by Matthias, so I would not qualify these as outdated. In fact these are the ones that currently can be used on a RPi4B. I even did add enough packages to have a workable XFCE system and most likely could have a workable KDE system. It lacks however support for sound and support for video output is poor. To avoid the problem I reported on in this thread, I needed to convert the image of Matthias into a system without btrfs. I am using ext4 for BOOT and ROOT and added a xfs partition for /home.
It shows a lot of errors like: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 8192 bytes), total 512 (slots), used 507 ... dec 03 17:59:27 localhost kernel: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 4096 bytes), total 512 (slots), used 511 ...
I could not find a parameter to increase the buffers.
Is it OK to report issues like these on this list?
For this we have bugzilla, it's known and people are working on fixing it. Use the official images and you don't have this problems ;)
My only intention is to assist in getting a proper working system on the RPi4B. My understanding is that bugzilla is for the "official" images and not for the images Matthias is working on.
Thorsten
-- fr.gr.
member openSUSE Freek de Kruijf
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
-- Thorsten Kukuk, Distinguished Engineer, Senior Architect SLES & MicroOS SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany Managing Director: Felix Imendoerffer (HRB 36809, AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 09/01/2020 13:06, Thorsten Kukuk wrote:
On Thu, Jan 09, Freek de Kruijf wrote:
Op woensdag 8 januari 2020 15:56:55 CET schreef Thorsten Kukuk:
On Wed, Jan 08, Freek de Kruijf wrote:
The latest image for the Raspberry Pi 4B from Matthias Brugger appears to be very slow when installing packages.
Matthias told you several times to use the official images, why are you still using this outdated ones?
I do use the official ones also, but these are unusable; no ethernet, no keyboard and no mouse support; access only via a serial connection. This support should be available in kernel 5.4,
The official Pi4 images are using 5.4.7?
There are quite some patches added to my kernel on top of 5.4: https://build.opensuse.org/package/view_file/home:mbrugger:branches:RPi4/ker... These are all part of v5.5 but submission is stuck because of some infrastructure problems for quite some time now.
which is used in the images of
Matthias. I do see daily new images generated by Matthias, so I would not
They are getting generated whenever a package changes. Because they are build against openSUSE:Factory:ARM
qualify these as outdated. In fact these are the ones that currently can be used on a RPi4B. I even did add enough packages to have a workable XFCE system and most likely could have a workable KDE system. It lacks however support for sound and support for video output is poor. To avoid the problem I reported on in this thread, I needed to convert the image of Matthias into a system without btrfs. I am using ext4 for BOOT and ROOT and added a xfs partition for /home.
It shows a lot of errors like: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 8192 bytes), total 512 (slots), used 507 ... dec 03 17:59:27 localhost kernel: sdhci-iproc fe340000.emmc2: swiotlb buffer is full (sz: 4096 bytes), total 512 (slots), used 511 ...
I could not find a parameter to increase the buffers.
Is it OK to report issues like these on this list?
For this we have bugzilla, it's known and people are working on fixing it. Use the official images and you don't have this problems ;)
My only intention is to assist in getting a proper working system on the RPi4B. My understanding is that bugzilla is for the "official" images and not for the images Matthias is working on.
Just try to delete swiotlb=512 from the kernelcmdline, that should fix the issue. This should land in the official image (maybe it already did). Regards, Matthias -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Freek de Kruijf -
Matthias Brugger -
Thorsten Kukuk