Hello! I have an interesting problem on my Radxa RockPi 5B (Rockchip RK3588) SOC: I have Leap Micro 5.5 running (Kernel 5.14.21-150500.55.36-default) and VMs cannot have more than one vCPU. When I boot a VM (here: Leap 15.5) with e.g. 2 vCPUs, I get the following error message: [ 0.003395][ T1] psci: failed to boot CPU1 (-22) [ 0.003409][ T1] CPU1: failed to boot: -22 And then after some time the system boots, but only with one CPU: # cat /proc/cpuinfo processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdh p cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 0 I also observe that one full core is constantly busy on the hypervisor, or more specifically by the qemu-system-aarch64 process therein. Anyone an idea what's going on here? Best, phoenix
Hi Phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Friday, December 1, 2023 9:09 AM To: arm@lists.opensuse.org Subject: Only one CPU on RockPi 5B
Hello! I have an interesting problem on my Radxa RockPi 5B (Rockchip RK3588) SOC: I have Leap Micro 5.5 running (Kernel 5.14.21-150500.55.36-default) and VMs cannot have more than one vCPU.
When I boot a VM (here: Leap 15.5) with e.g. 2 vCPUs, I get the following error message:
[ 0.003395][ T1] psci: failed to boot CPU1 (-22) [ 0.003409][ T1] CPU1: failed to boot: -22
And then after some time the system boots, but only with one CPU:
# cat /proc/cpuinfo processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdh p cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 0
I also observe that one full core is constantly busy on the hypervisor, or more specifically by the qemu-system-aarch64 process therein.
Anyone an idea what's going on here?
That's an interesting problem! Could you share the qemu command line you used to boot your guest? If possible, could you try Tumbleweed as host to check if the problem still exists with a more recent software stack? Thanks, Guillaume
Hey Guillaume, Find attached the xml of the VM I created and manage via virt-manager. This server is currently in usage, I will try to make some time on the weekend to check Tumbleweed and report back. Stay tuned, phoenix On 12/1/23 09:17, Guillaume Gardet wrote:
Hi Phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Friday, December 1, 2023 9:09 AM To: arm@lists.opensuse.org Subject: Only one CPU on RockPi 5B
Hello! I have an interesting problem on my Radxa RockPi 5B (Rockchip RK3588) SOC: I have Leap Micro 5.5 running (Kernel 5.14.21-150500.55.36-default) and VMs cannot have more than one vCPU.
When I boot a VM (here: Leap 15.5) with e.g. 2 vCPUs, I get the following error message:
[ 0.003395][ T1] psci: failed to boot CPU1 (-22) [ 0.003409][ T1] CPU1: failed to boot: -22
And then after some time the system boots, but only with one CPU:
# cat /proc/cpuinfo processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdh p cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 0
I also observe that one full core is constantly busy on the hypervisor, or more specifically by the qemu-system-aarch64 process therein.
Anyone an idea what's going on here?
That's an interesting problem!
Could you share the qemu command line you used to boot your guest? If possible, could you try Tumbleweed as host to check if the problem still exists with a more recent software stack?
Thanks, Guillaume
Hey Guillaume, Finally managed to test this on Tumbleweed and there i have two CPUs. So the issue appears to be only limited to Leap Micro 5.5 and not being present on Tumbleweed. Hardware: Radxa RockPi 5B (Rockchip RK3588) TW 20231205 Kernel: 6.6.3-1-default Should I open a bug for this issue? Best, phoenix On 12/1/23 09:40, Felix Niederwanger wrote:
Hey Guillaume,
Find attached the xml of the VM I created and manage via virt-manager.
This server is currently in usage, I will try to make some time on the weekend to check Tumbleweed and report back.
Stay tuned, phoenix
On 12/1/23 09:17, Guillaume Gardet wrote:
Hi Phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Friday, December 1, 2023 9:09 AM To: arm@lists.opensuse.org Subject: Only one CPU on RockPi 5B
Hello! I have an interesting problem on my Radxa RockPi 5B (Rockchip RK3588) SOC: I have Leap Micro 5.5 running (Kernel 5.14.21-150500.55.36-default) and VMs cannot have more than one vCPU.
When I boot a VM (here: Leap 15.5) with e.g. 2 vCPUs, I get the following error message:
[ 0.003395][ T1] psci: failed to boot CPU1 (-22) [ 0.003409][ T1] CPU1: failed to boot: -22
And then after some time the system boots, but only with one CPU:
# cat /proc/cpuinfo processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdh p cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 0
I also observe that one full core is constantly busy on the hypervisor, or more specifically by the qemu-system-aarch64 process therein.
Anyone an idea what's going on here?
That's an interesting problem!
Could you share the qemu command line you used to boot your guest? If possible, could you try Tumbleweed as host to check if the problem still exists with a more recent software stack?
Thanks, Guillaume
Hi phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Thursday, December 7, 2023 4:58 PM To: arm@lists.opensuse.org Subject: Re: Only one CPU on RockPi 5B
Hey Guillaume,
Finally managed to test this on Tumbleweed and there i have two CPUs. So the issue appears to be only limited to Leap Micro 5.5 and not being present on Tumbleweed.
That's good news!
Hardware: Radxa RockPi 5B (Rockchip RK3588) TW 20231205 Kernel: 6.6.3-1-default
Should I open a bug for this issue?
Yes please. And Cc me. Thanks, Guillaume
Best, phoenix
On 12/1/23 09:40, Felix Niederwanger wrote:
Hey Guillaume,
Find attached the xml of the VM I created and manage via virt-manager.
This server is currently in usage, I will try to make some time on the weekend to check Tumbleweed and report back.
Stay tuned, phoenix
On 12/1/23 09:17, Guillaume Gardet wrote:
Hi Phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Friday, December 1, 2023 9:09 AM To: arm@lists.opensuse.org Subject: Only one CPU on RockPi 5B
Hello! I have an interesting problem on my Radxa RockPi 5B (Rockchip RK3588) SOC: I have Leap Micro 5.5 running (Kernel 5.14.21-150500.55.36-default) and VMs cannot have more than one vCPU.
When I boot a VM (here: Leap 15.5) with e.g. 2 vCPUs, I get the following error message:
[ 0.003395][ T1] psci: failed to boot CPU1 (-22) [ 0.003409][ T1] CPU1: failed to boot: -22
And then after some time the system boots, but only with one CPU:
# cat /proc/cpuinfo processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdh p cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 0
I also observe that one full core is constantly busy on the hypervisor, or more specifically by the qemu-system-aarch64 process therein.
Anyone an idea what's going on here?
That's an interesting problem!
Could you share the qemu command line you used to boot your guest? If possible, could you try Tumbleweed as host to check if the problem still exists with a more recent software stack?
Thanks, Guillaume
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
See https://bugzilla.opensuse.org/show_bug.cgi?id=1217903 and I added you in the CC. Thanks! On 12/7/23 18:59, Guillaume Gardet wrote:
Hi phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Thursday, December 7, 2023 4:58 PM To: arm@lists.opensuse.org Subject: Re: Only one CPU on RockPi 5B
Hey Guillaume,
Finally managed to test this on Tumbleweed and there i have two CPUs. So the issue appears to be only limited to Leap Micro 5.5 and not being present on Tumbleweed.
That's good news!
Hardware: Radxa RockPi 5B (Rockchip RK3588) TW 20231205 Kernel: 6.6.3-1-default
Should I open a bug for this issue?
Yes please. And Cc me.
Thanks, Guillaume
Best, phoenix
On 12/1/23 09:40, Felix Niederwanger wrote:
Hey Guillaume,
Find attached the xml of the VM I created and manage via virt-manager.
This server is currently in usage, I will try to make some time on the weekend to check Tumbleweed and report back.
Stay tuned, phoenix
On 12/1/23 09:17, Guillaume Gardet wrote:
Hi Phoenix,
-----Original Message----- From: Felix Niederwanger <felix.niederwanger@suse.de> Sent: Friday, December 1, 2023 9:09 AM To: arm@lists.opensuse.org Subject: Only one CPU on RockPi 5B
Hello! I have an interesting problem on my Radxa RockPi 5B (Rockchip RK3588) SOC: I have Leap Micro 5.5 running (Kernel 5.14.21-150500.55.36-default) and VMs cannot have more than one vCPU.
When I boot a VM (here: Leap 15.5) with e.g. 2 vCPUs, I get the following error message:
[ 0.003395][ T1] psci: failed to boot CPU1 (-22) [ 0.003409][ T1] CPU1: failed to boot: -22
And then after some time the system boots, but only with one CPU:
# cat /proc/cpuinfo processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdh p cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 0
I also observe that one full core is constantly busy on the hypervisor, or more specifically by the qemu-system-aarch64 process therein.
Anyone an idea what's going on here?
That's an interesting problem!
Could you share the qemu command line you used to boot your guest? If possible, could you try Tumbleweed as host to check if the problem still exists with a more recent software stack?
Thanks, Guillaume
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
participants (2)
-
Felix Niederwanger -
Guillaume Gardet