[opensuse-arm] cubox-i / leap 42.3: problems with automatic module loading after upgrade
Hi, Just asking if this is only me or it's a wider problem: I recently updated my cubox-i with zypper, pulling in kernel-default-4.4.114, and after reboot the box boots, but several drivers are missing, so there is no wired ethernet, no mmcblk, etc. After booting and waiting for a while, dmesg starts to complain about driver detection did not finish in time (sadly I don't have the backtrace at hand, it already went out of the buffer of the serial console). For now I worked around the problem this way: - download the repo-oss (ie. non-update) kernel-default-4.4.76 rpm on an other machine, copied it to an usb stick - install the old kernel-default from the usb stick - copy the /boot from the root fs to the usb stick - use the other machine to update the /boot on the mmcblk device where u-boot reads it So is this only me or do other cubox-i users see the same? Thanks, Miklos
Hi, On 17.03.2018 17:30, Miklos Vajna wrote:
Hi,
Just asking if this is only me or it's a wider problem: I recently updated my cubox-i with zypper, pulling in kernel-default-4.4.114, and after reboot the box boots, but several drivers are missing, so there is no wired ethernet, no mmcblk, etc.
Maybe related - I run TW on my cubox-i but since a couple of kernel versions, usb storage does no longer work for me. So I'm currently still using kernel-default 4.10.13-3.ge5d11ce-default . Best, Tom -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 16.04.18 08:19, Thomas Bechtold wrote:
Hi,
On 17.03.2018 17:30, Miklos Vajna wrote:
Hi,
Just asking if this is only me or it's a wider problem: I recently updated my cubox-i with zypper, pulling in kernel-default-4.4.114, and after reboot the box boots, but several drivers are missing, so there is no wired ethernet, no mmcblk, etc.
Maybe related - I run TW on my cubox-i but since a couple of kernel versions, usb storage does no longer work for me. So I'm currently still using kernel-default 4.10.13-3.ge5d11ce-default .
FYI: on current TW (kernel 4.20.2-1-default), the usb storage works again. Best, Tom -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi Thomas,
On Wed, Feb 13, 2019 at 09:03:49AM +0100, Thomas Bechtold
FYI: on current TW (kernel 4.20.2-1-default), the usb storage works again.
Thanks a lot for the update. I finally played with this today, and actually Leap 15.0 is fine already on cubox-i with usb storage, so problem solved. :-) Regards, Miklos
participants (2)
-
Miklos Vajna -
Thomas Bechtold