[opensuse-arm] Latest Tumbleweed for Raspberry Pi 2 fails to boot
First I upgraded Tumbleweed on my RPi2, which gave me an system that does not boot anymore. After that I installed openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2019.01.08- Snapshot20190121.raw.xz on that system, which gives more or less the same problem. See the first few lines below. The output on the console is: [ 0.356882] Initramfs unpacking failed: junk in compressed archive [ 0.487556] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.495835] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.505224] Hardware name: BCM2835 [ 0.508660] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.516411] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.523641] [<c0dfdad4>] (dump_stack) from [<c0482508>] (panic+0x108/0x29c) [ 0.530612] [<c0482508>] (panic) from [<c1601790>] (mount_block_root+0x260/0x30c) [ 0.538099] [<c1601790>] (mount_block_root) from [<c1601a24>] (prepare_namespace+0x158/0x1a0) [ 0.546628] [<c1601a24>] (prepare_namespace) from [<c1601328>] (kernel_init_freeable+0x3f8/0x410) [ 0.555506] [<c1601328>] (kernel_init_freeable) from [<c0e15e30>] (kernel_init+0x10/0x11c) [ 0.563775] [<c0e15e30>] (kernel_init) from [<c04011cc>] (ret_from_fork+0x14/0x28) [ 0.571343] Exception stack(0xef12bfb0 to 0xef12bff8) [ 0.576394] bfa0: 00000000 00000000 00000000 00000000 [ 0.584573] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.592750] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.599378] CPU2: stopping [ 0.602091] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.611479] Hardware name: BCM2835 [ 0.614890] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.622637] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.629863] [<c0dfdad4>] (dump_stack) from [<c04433dc>] (handle_IPI+0x3f4/0x41c) [ 0.637261] [<c04433dc>] (handle_IPI) from [<c040217c>] (__irq_svc+0x5c/ 0x94) [ 0.644394] Exception stack(0xef145f60 to 0xef145fa8) [ 0.649446] 5f60: 00000000 00000000 2dff7000 40000093 ffffe000 c1805dd4 c1805e1c 00000004 [ 0.657625] 5f80: 00000000 c171d558 c18f982f 00000000 c1963ab8 ef145fb0 c043b948 c043b94c [ 0.665800] 5fa0: 40000013 ffffffff [ 0.669293] [<c040217c>] (__irq_svc) from [<c043b94c>] (arch_cpu_idle+0x30/0x64) [ 0.676694] [<c043b94c>] (arch_cpu_idle) from [<c04b9074>] (do_idle+0x1fc/ 0x2a4) [ 0.684095] [<c04b9074>] (do_idle) from [<c04b9400>] (cpu_startup_entry+0x24/0x2c) [ 0.691670] [<c04b9400>] (cpu_startup_entry) from [<0040326c>] (0x40326c) [ 0.698461] CPU3: stopping [ 0.701173] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.710561] Hardware name: BCM2835 [ 0.713970] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.721718] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.728943] [<c0dfdad4>] (dump_stack) from [<c04433dc>] (handle_IPI+0x3f4/0x41c) [ 0.736342] [<c04433dc>] (handle_IPI) from [<c040217c>] (__irq_svc+0x5c/ 0x94) [ 0.743474] Exception stack(0xef147f60 to 0xef147fa8) [ 0.748527] 7f60: 00000000 00000000 2e009000 40000093 ffffe000 c1805dd4 c1805e1c 00000008 [ 0.756706] 7f80: 00000000 c171d558 c18f982f 00000000 c1963ab8 ef147fb0 c043b948 c043b94c [ 0.764880] 7fa0: 40000013 ffffffff [ 0.768373] [<c040217c>] (__irq_svc) from [<c043b94c>] (arch_cpu_idle+0x30/0x64) [ 0.775772] [<c043b94c>] (arch_cpu_idle) from [<c04b9074>] (do_idle+0x1fc/ 0x2a4) [ 0.783172] [<c04b9074>] (do_idle) from [<c04b9400>] (cpu_startup_entry+0x24/0x2c) [ 0.790744] [<c04b9400>] (cpu_startup_entry) from [<0040326c>] (0x40326c) [ 0.797532] CPU1: stopping [ 0.800243] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.809632] Hardware name: BCM2835 [ 0.813042] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.820790] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.828015] [<c0dfdad4>] (dump_stack) from [<c04433dc>] (handle_IPI+0x3f4/0x41c) [ 0.835414] [<c04433dc>] (handle_IPI) from [<c040217c>] (__irq_svc+0x5c/ 0x94) [ 0.842546] Exception stack(0xef143f60 to 0xef143fa8) [ 0.847599] 3f60: 00000000 00000000 2dfe5000 40000093 ffffe000 c1805dd4 c1805e1c 00000002 [ 0.855778] 3f80: 00000000 c171d558 c18f982f 00000000 c1963ab8 ef143fb0 c043b948 c043b94c [ 0.863952] 3fa0: 40000013 ffffffff [ 0.867446] [<c040217c>] (__irq_svc) from [<c043b94c>] (arch_cpu_idle+0x30/0x64) [ 0.874845] [<c043b94c>] (arch_cpu_idle) from [<c04b9074>] (do_idle+0x1fc/ 0x2a4) [ 0.882244] [<c04b9074>] (do_idle) from [<c04b9400>] (cpu_startup_entry+0x24/0x2c) [ 0.889816] [<c04b9400>] (cpu_startup_entry) from [<0040326c>] (0x40326c) [ 0.896622] Rebooting in 90 seconds.. [ 91.909884] Reboot failed -- System halted -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi,
-----Original Message----- From: Freek de Kruijf <freek@opensuse.org> Sent: 26 January 2019 22:12 To: Mailinglist openSUSE ARM <opensuse-arm@opensuse.org> Subject: [opensuse-arm] Latest Tumbleweed for Raspberry Pi 2 fails to boot
First I upgraded Tumbleweed on my RPi2, which gave me an system that does not boot anymore.
I have the same problem with my Chromebook ARM which also uses kernel-lpae. Did you reported this bug to bugzilla.opensue.org? As a workaround, you can boot previous kernel (4.19.x) and install kernel-default instead of kernel-lpae. @Andreas, could it be the EFI enablement for armv7 which could break lpae? Guillaume
After that I installed openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2019.01.08- Snapshot20190121.raw.xz on that system, which gives more or less the same problem. See the first few lines below.
The output on the console is: [ 0.356882] Initramfs unpacking failed: junk in compressed archive [ 0.487556] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.495835] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.505224] Hardware name: BCM2835 [ 0.508660] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.516411] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.523641] [<c0dfdad4>] (dump_stack) from [<c0482508>] (panic+0x108/0x29c) [ 0.530612] [<c0482508>] (panic) from [<c1601790>] (mount_block_root+0x260/0x30c) [ 0.538099] [<c1601790>] (mount_block_root) from [<c1601a24>] (prepare_namespace+0x158/0x1a0) [ 0.546628] [<c1601a24>] (prepare_namespace) from [<c1601328>] (kernel_init_freeable+0x3f8/0x410) [ 0.555506] [<c1601328>] (kernel_init_freeable) from [<c0e15e30>] (kernel_init+0x10/0x11c) [ 0.563775] [<c0e15e30>] (kernel_init) from [<c04011cc>] (ret_from_fork+0x14/0x28) [ 0.571343] Exception stack(0xef12bfb0 to 0xef12bff8) [ 0.576394] bfa0: 00000000 00000000 00000000 00000000 [ 0.584573] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.592750] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.599378] CPU2: stopping [ 0.602091] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.611479] Hardware name: BCM2835 [ 0.614890] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.622637] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.629863] [<c0dfdad4>] (dump_stack) from [<c04433dc>] (handle_IPI+0x3f4/0x41c) [ 0.637261] [<c04433dc>] (handle_IPI) from [<c040217c>] (__irq_svc+0x5c/ 0x94) [ 0.644394] Exception stack(0xef145f60 to 0xef145fa8) [ 0.649446] 5f60: 00000000 00000000 2dff7000 40000093 ffffe000 c1805dd4 c1805e1c 00000004 [ 0.657625] 5f80: 00000000 c171d558 c18f982f 00000000 c1963ab8 ef145fb0 c043b948 c043b94c [ 0.665800] 5fa0: 40000013 ffffffff [ 0.669293] [<c040217c>] (__irq_svc) from [<c043b94c>] (arch_cpu_idle+0x30/0x64) [ 0.676694] [<c043b94c>] (arch_cpu_idle) from [<c04b9074>] (do_idle+0x1fc/ 0x2a4) [ 0.684095] [<c04b9074>] (do_idle) from [<c04b9400>] (cpu_startup_entry+0x24/0x2c) [ 0.691670] [<c04b9400>] (cpu_startup_entry) from [<0040326c>] (0x40326c) [ 0.698461] CPU3: stopping [ 0.701173] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.710561] Hardware name: BCM2835 [ 0.713970] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.721718] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.728943] [<c0dfdad4>] (dump_stack) from [<c04433dc>] (handle_IPI+0x3f4/0x41c) [ 0.736342] [<c04433dc>] (handle_IPI) from [<c040217c>] (__irq_svc+0x5c/ 0x94) [ 0.743474] Exception stack(0xef147f60 to 0xef147fa8) [ 0.748527] 7f60: 00000000 00000000 2e009000 40000093 ffffe000 c1805dd4 c1805e1c 00000008 [ 0.756706] 7f80: 00000000 c171d558 c18f982f 00000000 c1963ab8 ef147fb0 c043b948 c043b94c [ 0.764880] 7fa0: 40000013 ffffffff [ 0.768373] [<c040217c>] (__irq_svc) from [<c043b94c>] (arch_cpu_idle+0x30/0x64) [ 0.775772] [<c043b94c>] (arch_cpu_idle) from [<c04b9074>] (do_idle+0x1fc/ 0x2a4) [ 0.783172] [<c04b9074>] (do_idle) from [<c04b9400>] (cpu_startup_entry+0x24/0x2c) [ 0.790744] [<c04b9400>] (cpu_startup_entry) from [<0040326c>] (0x40326c) [ 0.797532] CPU1: stopping [ 0.800243] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-1-lpae #1 openSUSE Tumbleweed (unreleased) [ 0.809632] Hardware name: BCM2835 [ 0.813042] [<c04469a0>] (unwind_backtrace) from [<c043f270>] (show_stack+0x1c/0x28) [ 0.820790] [<c043f270>] (show_stack) from [<c0dfdad4>] (dump_stack+0xac/ 0xd8) [ 0.828015] [<c0dfdad4>] (dump_stack) from [<c04433dc>] (handle_IPI+0x3f4/0x41c) [ 0.835414] [<c04433dc>] (handle_IPI) from [<c040217c>] (__irq_svc+0x5c/ 0x94) [ 0.842546] Exception stack(0xef143f60 to 0xef143fa8) [ 0.847599] 3f60: 00000000 00000000 2dfe5000 40000093 ffffe000 c1805dd4 c1805e1c 00000002 [ 0.855778] 3f80: 00000000 c171d558 c18f982f 00000000 c1963ab8 ef143fb0 c043b948 c043b94c [ 0.863952] 3fa0: 40000013 ffffffff [ 0.867446] [<c040217c>] (__irq_svc) from [<c043b94c>] (arch_cpu_idle+0x30/0x64) [ 0.874845] [<c043b94c>] (arch_cpu_idle) from [<c04b9074>] (do_idle+0x1fc/ 0x2a4) [ 0.882244] [<c04b9074>] (do_idle) from [<c04b9400>] (cpu_startup_entry+0x24/0x2c) [ 0.889816] [<c04b9400>] (cpu_startup_entry) from [<0040326c>] (0x40326c) [ 0.896622] Rebooting in 90 seconds.. [ 91.909884] Reboot failed -- System halted
-- fr.gr.
member openSUSE Freek de Kruijf
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op maandag 28 januari 2019 08:28:49 CET schreef Guillaume Gardet:
Hi,
-----Original Message----- From: Freek de Kruijf <freek@opensuse.org> Sent: 26 January 2019 22:12 To: Mailinglist openSUSE ARM <opensuse-arm@opensuse.org> Subject: [opensuse-arm] Latest Tumbleweed for Raspberry Pi 2 fails to boot
First I upgraded Tumbleweed on my RPi2, which gave me an system that does not boot anymore.
I have the same problem with my Chromebook ARM which also uses kernel-lpae. Did you reported this bug to bugzilla.opensue.org?
No, not yet. Should I?
As a workaround, you can boot previous kernel (4.19.x) and install kernel-default instead of kernel-lpae.
I did not think of using the previous kernel. Instead I am using Leap 15.0 now on that system. Reinstalling the honeypot on it is not so much work. One of the messages after "zypper dup --no-r" was about the non existence of a file /boot/.../fonts/unicode.pf2. This file is in /boot/, so I created the fonts folder and a link to this file. Did not help.
@Andreas, could it be the EFI enablement for armv7 which could break lpae?
Guillaume
When a new image is available I will try to use Tumbleweed again. -- fr.gr. member openSUSE Freek de Kruijf P.S. No need to reply to my address; to the list is enough. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op maandag 28 januari 2019 08:28:49 CET schreef Guillaume Gardet:
Hi,
-----Original Message----- From: Freek de Kruijf <freek@opensuse.org> Sent: 26 January 2019 22:12 To: Mailinglist openSUSE ARM <opensuse-arm@opensuse.org> Subject: [opensuse-arm] Latest Tumbleweed for Raspberry Pi 2 fails to boot
First I upgraded Tumbleweed on my RPi2, which gave me an system that does not boot anymore.
I have the same problem with my Chromebook ARM which also uses kernel-lpae. Did you reported this bug to bugzilla.opensue.org?
Yes. https://bugzilla.opensuse.org/show_bug.cgi?id=1123350 -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (2)
-
Freek de Kruijf -
Guillaume Gardet