[opensuse-arm] Try to use Leap15 cubietruck image
Hi, I tried to update my 42.3 cubietruck to leap 15, but it seems the current image does not work, it's end up on on "[ OK ] Reached target Remote File Systems.". I tried this several times with different SD cards - always the same (sha256 on the image is OK). The tumbleweed image boots fine, it stops for a while on the same stage on the first boot, but has an additional line on the serial console: ... "[ OK ] Reached target Remote File Systems." Starting dracut pre-mount hook..." then it continues with expanding the disk. Here the full serial output from the leap15 boot: U-Boot SPL 2018.03 (Apr 12 2018 - 15:19:29 +0000) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2018.03 (Apr 12 2018 - 15:19:29 +0000) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubietruck I2C: ready DRAM: 2 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment Failed (-5) Loading Environment from MMC... *** Warning - bad CRC, using default environment Failed (-5) Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) SCSI: Target spinup took 0 ms. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c50000 Warning: usb_ether using MAC address from ROM , eth1: usb_ether starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 2576 bytes read in 21 ms (119.1 KiB/s) ## Executing script at 43100000 switch to partitions #0, OK mmc0 is current device 6956352 bytes read in 725 ms (9.1 MiB/s) 22721440 bytes read in 1520 ms (14.3 MiB/s) 52901 bytes read in 240 ms (214.8 KiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Using Device Tree in place at 43000000, end 4300fea4 Starting kernel ... Welcome to openSUSE Leap 15.0 dracut-044-lp150.13.3 (Initramfs)! [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Local File Systems. [ OK ] Listening on Journal Socket. [ OK ] Reached target Swap. [ OK ] Created slice System Slice. Starting dracut cmdline hook... [ OK ] Reached target Slices. Starting Create list of required st�.|ce nodes for the current kernel... [ OK ] Reached target Timers. [ OK ] Listening on Journal Audit Socket. Starting Journal Service... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Paths. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Sockets. Starting Load Kernel Modules... [ OK ] Started Journal Service. [ OK ] Started Create list of required sta�.|vice nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting dracut pre-trigger hook... [ OK ] Started dracut pre-trigger hook. Starting udev Coldplug all Devices... Mounting Kernel Configuration File System... [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted Kernel Configuration File System. [ OK ] Reached target System Initialization. [ OK ] Reached target Basic System. Starting dracut initqueue hook... [ OK ] Found device /dev/disk/by-uuid/fe3ad73f-0035-4969-9a3f-479234fd9162. [ OK ] Reached target Initrd Root Device. [ OK ] Started dracut initqueue hook. Starting dracut pre-mount hook... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Any ideas what to do ? Best regards Karsten -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (1)
-
Karsten Keil