[opensuse-arm] Latest Raspi JeOS image
Hi, I'm trying to use openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber..., write to SD card with xzcat as described in HCL:Raspberry_Pi Is this a working image file? For me, the boot process hangs at "Loading kernel" (no progress after several minutes) Same hardware (including same SD card) boots raspian 2014-12-24 version perfectly. FWIW it's an early model B (type 0002) My image file (.raw.xz) has md5sum f61450a3eb30ff5419463d153271fe0c, but I can't find an expected sum to compare with. Also, xzcat reports no issues when copying to SD card. If this image file is no good, can someone point me to the last good one? Many thanks Richard (MQ) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Richard (MQ) wrote:
I'm trying to use openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber..., write to SD card with xzcat as described in HCL:Raspberry_Pi
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I used with success: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... I don't know any details about the repo structure details though. Ciao, Michael.
On 28/01/15 21:21, Michael Ströder wrote:
Richard (MQ) wrote:
I'm trying to use openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber..., write to SD card with xzcat as described in HCL:Raspberry_Pi
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I used with success:
http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp...
I don't know any details about the repo structure details though.
Ciao, Michael.
Many thanks Michael, I'll give this a try and report back. -- Cheers Richard (MQ) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 01/29/2015 08:55 AM, Richard MQ wrote:
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too. OpenWRT works, so the Pi should be OK. greetings Kai Dupke Senior Product Manager Server Product Line -- Sell not virtue to purchase wealth, nor liberty to purchase power. Phone: +49-(0)5102-9310828 Mail: kdupke@suse.com Mobile: +49-(0)173-5876766 WWW: www.suse.com SUSE Linux GmbH - Maxfeldstr. 5 - 90409 Nuernberg (Germany) GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Jennifer Guild, Graham Norton,HRB 21284 (AG Nurnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
greetings Kai Dupke Senior Product Manager Server Product Line
-- Jim McDonough jmcdonough@suse.de jmcd@samba.org +49 911 74053 3944
On 10/02/15 14:55, Jim McDonough wrote:
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
Thanks Jim, Mine's also a B - it's more-or-less the same as the top left image in http://raspi.tv/2014/the-raspberry-pi-family. Please can I confirm (because my original posting has been cut in this sub-thread, and I think there was a typo in teh line quoted above from Kai Dupke) that you have had success on yours with: openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz md5sum: f61450a3eb30ff5419463d153271fe0c This is the only recent image I have been able to locate from a source that I can trust. -- Many thanks Richard -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Am 10.02.2015 um 21:19 schrieb Richard (MQ):
On 10/02/15 14:55, Jim McDonough wrote:
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
Thanks Jim,
Mine's also a B - it's more-or-less the same as the top left image in http://raspi.tv/2014/the-raspberry-pi-family.
Please can I confirm (because my original posting has been cut in this sub-thread, and I think there was a typo in teh line quoted above from Kai Dupke) that you have had success on yours with:
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz md5sum: f61450a3eb30ff5419463d153271fe0c
This is the only recent image I have been able to locate from a source that I can trust.
Hi, Richard. With the OS-Version Build36.2 as you mentionned above, I had no problems to put it on a stick. Monitor was a HDMI-type- Also "firstboot" executed correctly. With YAST I configured root-PW. language, keyboard. After a reboot I used YAST2 again in order to configure the static IP etc, as I was familiar wirh the "standard" OS-Versions since 20 years. Further infos I found in the paper "HCL:Raspberry Pi". Also I installed my favorite Midnight-Commander. Open problems (my be others to come in the future): 1. Unable to open X-Window 2. could not adjust a standard FBAS-Terminal, as I offen intend to use a 7"-Monitor in text-mode (with debian-squeeze configuration was done in "/boot/conf.txt) 3. When closing with "poweroff" or "shutdown -h now" system restarted. Wish you all the best and good luck Edgar, DJ3PU, Munich -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 10/02/15 14:55, Jim McDonough wrote:
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
Thanks Jim,
Mine's also a B - it's more-or-less the same as the top left image in http://raspi.tv/2014/the-raspberry-pi-family.
Please can I confirm (because my original posting has been cut in this sub-thread, and I think there was a typo in teh line quoted above from Kai Dupke) that you have had success on yours with:
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz md5sum: f61450a3eb30ff5419463d153271fe0c Yes, This is the image I used. I'm not sure how to check from inside
On 02/10/2015 03:19 PM, Richard (MQ) wrote: the boot ed image to be totally sure...and I was hoping to not wipe this out yet. But my shell history shows that was the last one I dd'ed onto an sdcard
This is the only recent image I have been able to locate from a source that I can trust.
-- Jim McDonough jmcdonough@suse.de jmcd@samba.org +49 911 74053 3944
On 02/11/2015 07:20 AM, Jim McDonough wrote:
On 10/02/15 14:55, Jim McDonough wrote:
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
> Is this a working image file? > > For me, the boot process hangs at "Loading kernel" (no progress after > several > minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
Thanks Jim,
Mine's also a B - it's more-or-less the same as the top left image in http://raspi.tv/2014/the-raspberry-pi-family.
Please can I confirm (because my original posting has been cut in this sub-thread, and I think there was a typo in teh line quoted above from Kai Dupke) that you have had success on yours with:
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz md5sum: f61450a3eb30ff5419463d153271fe0c Yes, This is the image I used. I'm not sure how to check from inside
On 02/10/2015 03:19 PM, Richard (MQ) wrote: the boot ed image to be totally sure...and I was hoping to not wipe this out yet.
But my shell history shows that was the last one I dd'ed onto an sdcard Additionally, I never connected to a display.
This is the only recent image I have been able to locate from a source that I can trust.
-- Jim McDonough jmcdonough@suse.de jmcd@samba.org +49 911 74053 3944
On 11/02/15 12:25, Jim McDonough wrote:
On 02/11/2015 07:20 AM, Jim McDonough wrote:
On 10/02/15 14:55, Jim McDonough wrote:
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
>> Is this a working image file? >> >> For me, the boot process hangs at "Loading kernel" (no progress after >> several >> minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
Thanks Jim,
Mine's also a B - it's more-or-less the same as the top left image in http://raspi.tv/2014/the-raspberry-pi-family.
Please can I confirm (because my original posting has been cut in this sub-thread, and I think there was a typo in teh line quoted above from Kai Dupke) that you have had success on yours with:
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz md5sum: f61450a3eb30ff5419463d153271fe0c Yes, This is the image I used. I'm not sure how to check from inside
On 02/10/2015 03:19 PM, Richard (MQ) wrote: the boot ed image to be totally sure...and I was hoping to not wipe this out yet.
But my shell history shows that was the last one I dd'ed onto an sdcard Additionally, I never connected to a display.
This is the only recent image I have been able to locate from a source that I can trust.
OK thanks everyone. it looks as if 36.2 should work, even though it isn't playing nicely for me. I'll try downloading it at work... -- Cheers Richard -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 12/02/15 06:42, Richard (MQ) wrote:
OK thanks everyone. it looks as if 36.2 should work, even though it isn't playing nicely for me. I'll try downloading it at work...
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz I wish people would publish a check sum with these image files... -- Richard -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On Thu, 12 Feb 2015 08:28:09 +0000 Richard MQ <osl2008@gmail.com> wrote:
On 12/02/15 06:42, Richard (MQ) wrote:
OK thanks everyone. it looks as if 36.2 should work, even though it isn't playing nicely for me. I'll try downloading it at work...
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I wish people would publish a check sum with these image files...
Richard, When you are on the download page: http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber... there is a link on the right that says "details". If you click on that it will give you all sorts of information including several kinds of checksums for the file. Bill -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 12/02/15 15:31, Bill Merriam wrote:
On Thu, 12 Feb 2015 08:28:09 +0000 Richard MQ <osl2008@gmail.com> wrote:
On 12/02/15 06:42, Richard (MQ) wrote:
OK thanks everyone. it looks as if 36.2 should work, even though it isn't playing nicely for me. I'll try downloading it at work...
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I wish people would publish a check sum with these image files...
Richard,
When you are on the download page: http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber... there is a link on the right that says "details". If you click on that it will give you all sorts of information including several kinds of checksums for the file.
D'oh! -- Richard (MQ) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On Thu, 12 Feb 2015 20:07:49 +0000 "Richard (MQ)" <rmq2008@gmail.com> wrote:
On 12/02/15 15:31, Bill Merriam wrote:
On Thu, 12 Feb 2015 08:28:09 +0000 Richard MQ <osl2008@gmail.com> wrote:
On 12/02/15 06:42, Richard (MQ) wrote:
OK thanks everyone. it looks as if 36.2 should work, even though it isn't playing nicely for me. I'll try downloading it at work...
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I wish people would publish a check sum with these image files...
Richard,
When you are on the download page: http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber... there is a link on the right that says "details". If you click on that it will give you all sorts of information including several kinds of checksums for the file.
D'oh!
There is, BTW, a very nice extension for Firefox called DownThemAll which can download from more than one mirror at the same time and check the checksum when the download finishes. Bill -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 02/12/2015 09:28 AM, Richard MQ wrote:
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I got a different md5sum with a fresh download from the effective download url: http://ftp5.gwdg.de/pub/opensuse/repositories/devel:/ARM:/13.2:/Contrib:/Ras... md5sum: f61450a3eb30ff5419463d153271fe0c Not sure what's wrong, might be a sync issue? greetings kai -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Richard MQ <osl2008@gmail.com> writes:
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I wish people would publish a check sum with these image files...
http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber... Andreas. -- Andreas Schwab, SUSE Labs, schwab@suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 12/02/15 16:00, Andreas Schwab wrote:
Richard MQ <osl2008@gmail.com> writes:
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I wish people would publish a check sum with these image files...
http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber...
Thanks Andreas, I didn't know of this feature - and the sum matches my original f6...0c So it's user error, again, on my part - though I still don't see what I am doing wrong. -- Richard (MQ) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Richard (MQ) wrote:
On 12/02/15 16:00, Andreas Schwab wrote:
Richard MQ <osl2008@gmail.com> writes:
Very interesting - I downloaded at work and got a different md5: now d41d8cd98f00b204e9800998ecf8427e File name still openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz
I wish people would publish a check sum with these image files...
http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber...
I didn't know of this feature - and the sum matches my original f6...0c
So it's user error, again, on my part - though I still don't see what I am doing wrong.
One of my first errors was messing up the dd command when copying the image on the SD card (using a partition as target instead of the whole raw device). Ciao, Michael.
Hi, Am 28.01.2015 um 21:56 schrieb Richard (MQ):
I'm trying to use openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber..., write to SD card with xzcat as described in HCL:Raspberry_Pi
Is this a working image file?
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build30.7.raw.xz was working fine for me. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 29/01/15 12:20, Andreas Färber wrote:
Hi,
Am 28.01.2015 um 21:56 schrieb Richard (MQ):
I'm trying to use openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber..., write to SD card with xzcat as described in HCL:Raspberry_Pi
Is this a working image file?
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build30.7.raw.xz was working fine for me.
Thanks Andreas Do you know where I can find this? is there a old-versions repo anywhere? Many thanks Richard -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 29/01/15 12:20, Andreas Färber wrote:
Hi,
Am 28.01.2015 um 21:56 schrieb Richard (MQ):
I'm trying to use openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber..., write to SD card with xzcat as described in HCL:Raspberry_Pi
Is this a working image file?
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build30.7.raw.xz was working fine for me.
Regards, Andreas
Thanks Andreas, Do you know where I can find this image file? The only file visible at http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspber... is Build 36.2, and googling for Build 30.7 comes back with only this thread! Best regards Richard -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (9)
-
Andreas Färber -
Andreas Schwab -
Bill Merriam -
Edgar Dombrowski -
Jim McDonough -
Kai Dupke -
Michael Ströder -
Richard (MQ) -
Richard MQ