Hello, I try to add a new ARM board (JeOS-socfpgade0nanosoc) to factory ARM. Now I have some problems to get the image [1] to work on the target. It cannot find a boot device during first startup (see appended serial console output). To debug that I did a setenv append kiwidebug=1 saveenv on u-boot console and by that the boot process should start a console. But problem 1: [1483747199.877840] Starting boot shell on /dev/tty2 [1483747200.888525] Searching for boot device... [1483747233.661872] Failed to find boot device ! Press Enter for maintenance (or press Control-D to continue): after that no input is accepted, neither Enter nor Control-D. I tried to reconfigure my serial terminal to test with CR, LF and CRLF line endings, all the same result. I guess that it has to do with the console on /dev/tty2, which is not the serial console. How can this be changed? Problem 2: The system immediately restarts with the latest images when it reached that point, that was not the case one week ago or so. How to debug or change that? Br, Frank [1] https://build.opensuse.org/package/show/home:frank_kunz:branches:openSUSE:Fa... Serial output: U-Boot SPL 2017.01-rc3 (Jan 06 2017 - 14:29:12) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete Trying to boot from MMC1 U-Boot 2017.01-rc3 (Jan 06 2017 - 14:29:12 +0000) CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A4 or SX/C4, version 0x0 BOOT: SD/MMC Internal Transceiver (3.0V) Watchdog enabled I2C: ready DRAM: 1 GiB MMC: dwmmc0@ff704000: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Terasic DE0-Nano(Atlas) Net: Error: ethernet@ff702000 address not set. No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Found U-Boot script /boot.scr 2767 bytes read in 11 ms (245.1 KiB/s) ## Executing script at 02100000 switch to partitions #0, OK mmc0 is current device 7667392 bytes read in 545 ms (13.4 MiB/s) 41831930 bytes read in 2871 ms (13.9 MiB/s) 17507 bytes read in 73 ms (233.4 KiB/s) ## Loading init Ramdisk from Legacy Image at 07000000 ... Image Name: Initrd Created: 2017-01-07 21:42:27 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 41831866 Bytes = 39.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 06f00000 Booting using the fdt blob at 0x6f00000 reserving fdt memory region: addr=0 size=1000 Loading Device Tree to 03ff8000, end 03fff462 ... OK Starting kernel ... setterm: cannot (un)set powersave mode: Inappropriate ioctl for device Sat Jan 7 00:00:00 UTC 2017 [1483747200.768671] Searching for boot device... [1483747233.594935] Failed to find boot device ! KIWI Log: KIWI .profile contents: kiwi_align='1048576' kiwi_bootkernel='custom' kiwi_bootloader='uboot' kiwi_bootprofile='default' kiwi_cmdline='loglevel=3 splash=silent plymouth.enable=0 rootflags=size=100% console=ttyS0,115200n8' kiwi_cpio_name='initrd-oemboot-suse-tumbleweed' kiwi_delete='Mesa cracklib-dict-full fillup gdbm info insserv make mingetty openSUSE-release pam pam-modules perl perl-Bootload er permissions python python-base' kiwi_displayname='openSUSE' kiwi_drivers='crypto/*,drivers/acpi/*,drivers/acpi/dock.ko,drivers/ata/*,drivers/block/brd.ko,drivers/block/cciss.ko,drivers/bl ock/loop.ko,drivers/block/virtio_blk.ko,drivers/cdrom/*,drivers/char/hw_random/virtio-rng.ko,drivers/char/lp.ko,drivers/dma/*,d rivers/firmware/edd.ko,drivers/gpio/*,drivers/gpu/*,drivers/gpu/drm/*,drivers/hid/*,drivers/hwmon/*,drivers/ide/*,drivers/input /keyboard/*,drivers/input/mouse/*,drivers/md/*,drivers/message/fusion/*,drivers/mmc/*,drivers/mmc/card/*,drivers/mmc/host/*,dri vers/net/*,drivers/parport/*,drivers/phy/*,drivers/regulator/*,drivers/scsi/*,drivers/staging/hv/*,drivers/thermal/*,drivers/us b/*,drivers/virtio/*,fs/binfmt_aout.ko,fs/binfmt_misc.ko,fs/btrfs/*,fs/exportfs/*,fs/ext2/*,fs/ext3/*,fs/ext4/*,fs/fat/*,fs/fus e/*,fs/hfs/*,fs/isofs/*,fs/jbd/*,fs/jbd2/*,fs/mbcache.ko,fs/nls/nls_cp437.ko,fs/nls/nls_iso8859-1.ko,fs/nls/nls_utf8.ko,fs/over layfs/*,fs/quota_v1.ko,fs/quota_v2.ko,fs/squashfs/*,fs/udf/*,fs/vfat/*,fs/xfs/*,lib/crc-t10dif.ko,lib/crc16.ko,lib/libcrc32c.ko ,lib/zlib_deflate/zlib_deflate.ko,net/packet/*' kiwi_firmware='ofw' kiwi_fsmountoptions='noatime,nobarrier' kiwi_iname='initrd-oemboot-suse-tumbleweed' kiwi_iversion='2.7.1' kiwi_language='en_US' kiwi_loader_theme='openSUSE' kiwi_oemataraid_scan='true' kiwi_oemmultipath_scan='true' kiwi_oemskipverify='true' kiwi_oemswap='true' kiwi_oemswapMB='500' kiwi_profiles='default,custom' kiwi_revision='0845f334f23450ad03841febae8ddd10cb3b4a0b' kiwi_sectorsize='512' kiwi_splash_theme='openSUSE' kiwi_startsector='2048' kiwi_strip_delete='/etc/services /etc/udev/hwdb.bin /lib/firmware/brcm/*-pcie.bin /lib/firmware/radeon /lib/i686/nosegneg /lib/ modules/*/kernel/crypto /lib/modules/*/kernel/drivers/infiniband /lib/modules/*/kernel/drivers/isdn /lib/modules/*/kernel/drive rs/md /lib/modules/*/kernel/drivers/media /lib/modules/*/kernel/drivers/net /lib/modules/*/kernel/drivers/scsi /lib/modules/*/k ernel/net /lib/modules/*/kernel/sound /usr/bin/busybox /usr/bin/curl /usr/bin/diff /usr/bin/fbiterm /usr/bin/gawk /usr/bin/host /usr/bin/journalctl /usr/bin/rsync /usr/lib*/gconv /usr/lib/genisoimage /usr/lib/grub2 /usr/lib/ldscripts /usr/lib/perl5 /usr/ lib/rpm /usr/lib/systemd/catalog /usr/lib/systemd/system/busnames.target.wants /usr/lib/systemd/system/local-fs.target.wants /u sr/lib/systemd/system/multi-user.target.wants /usr/lib/systemd/system/poweroff.target.wants /usr/lib/systemd/systemd-backlight /usr/lib/systemd/systemd-bus-proxyd /usr/lib/systemd/systemd-coredump /usr/lib/systemd/systemd-localed /usr/lib/systemd/systemd -logind /usr/lib/systemd/systemd-machined /usr/lib/systemd/systemd-networkd /usr/lib/systemd/systemd-timesyncd /usr/lib/systemd /user /usr/lib/systemd/user-generators /usr/lib/udev/hwdb.d /usr/lib/wicked /usr/lib64/ldscripts /usr/sbin/wicked /usr/share/X1 1/locale /usr/share/backgrounds /usr/share/fbiterm /usr/share/fonts /usr/share/grub2/backgrounds /usr/share/help /usr/share/icu /usr/share/info /usr/share/kbd /usr/share/locale /usr/share/misc/magic /usr/share/pci.ids /usr/share/pci.ids.d /usr/share/spla shy /usr/share/tc /usr/share/wicked /usr/src/packages /var/adm /var/cache/zypp /var/log/* usr/share/bash-completion usr/share/b ash/helpfiles usr/share/emacs usr/share/sgml usr/share/zoneinfo usr/share/zsh' kiwi_strip_libs='libaio libdevmapper libdmraid-events-isw libdrm libfontenc libfreetype libgcc_s libjpeg libkmod libkms libnsl libnss_compat libnss_dns libnss_files libply-boot-client libply-splash-graphics libpng libresolv librt libselinux libsepol libs plashy libsplashycnf libsysfs libutempter libutil' kiwi_strip_tools='arch ata_id atftp atftpd awk basename bash bc blkid blockdev blogd btrfs btrfsck btrfsctl btrfstune b U-Boot SPL 2017.01-rc3 (Jan 06 2017 - 14:29:12) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete Trying to boot from MMC1 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org