Hi there, finally found the time to check I used an image called openSUSE-Tumbleweed-ARM-JeOS-odroid.armv7l-20160303.0.0-Build9.1.raw Ethernet wasn't connected, but it looks as if the kernel doesn't support the exynos again.. U-Boot 2016.03-rc2 (Feb 26 2016 - 21:53:43 +0000) CPU: Exynos4412 @ 1 GHz Model: Odroid based on Exynos4412 Board: Odroid based on Exynos4412 Type: u3 DRAM: 2 GiB LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling LDO21@TFLASH_2.8V: set 2800000 uV; enabling MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment Net: No ethernet found. Hit any key to stop autoboot: 0 2732 bytes read in 136 ms (19.5 KiB/s) ## Executing script at 42000000 switch to partitions #0, OK mmc0 is current device 7286136 bytes read in 4429 ms (1.6 MiB/s) 32449885 bytes read in 16362 ms (1.9 MiB/s) 53476 bytes read in 424 ms (123 KiB/s) Kernel image @ 0x40007fc0 [ 0x000000 - 0x6f2d78 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 32449821 Bytes = 30.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 40800000 Booting using the fdt blob at 0x40800000 Using Device Tree in place at 40800000, end 408100e3 Starting kernel ... Greetings Dieter On Thu, 25 Feb 2016 13:51:51 +0100, Guillaume Gardet wrote:
Hi Dieter,
Could you try the latest image from:
http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Odro...
Guillaume
Le 29/01/2016 14:47, Dieter Thalmayr a écrit :
Hi there,
Guillaume Gardet helped me to get an odroid u3 running with a SUSE anything younger than a 12.3. Actually, we used an image that can be found at
http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Odro...
That image is "factory".
We had many issues with the uboot bootloader, but after months and close to one dozen tries the bootloader boots the kernel.
But then: ----snip ---- U-Boot 2016.01 (Jan 25 2016 - 22:47:58 +0000)
CPU: Exynos4412 @ 1 GHz Model: Odroid based on Exynos4412 Board: Odroid based on Exynos4412 Type: u3 DRAM: 2 GiB LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling LDO21@TFLASH_2.8V: set 2800000 uV; enabling MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment
Net: No ethernet found. Hit any key to stop autoboot: 0 2721 bytes read in 135 ms (19.5 KiB/s) ## Executing script at 42000000 autoboot=if test -e mmc 0 boot.scr; then; run boot_script; elif test -e mmc 0 I; baudrate=115200 boardname=odroidu3 boot_fit=setenv kerneladdr 0x42000000;setenv kernelname Image.itb;run loadkerne} boot_script=run loadbootscript;source ${scriptaddr} boot_uimg=setenv kerneladdr 0x40007FC0;setenv kernelname uImage;run check_dtb;r; boot_zimg=setenv kerneladdr 0x40007FC0;setenv kernelname zImage;run check_dtb;r; bootargs=Please use defined boot bootcmd=run autoboot bootdelay=0 check_dtb=if run loaddtb; then setenv fdt_addr ${fdtaddr};else setenv fdt_addr;; check_ramdisk=if run loadinitrd; then setenv initrd_addr ${initrdaddr};else set; console=console=ttySAC1,115200n8 consoleoff=set console console=ram; save; reset consoleon=set console console=ttySAC1,115200n8; save; reset dfu_alt_info=Please reset the board dfu_alt_system=uImage fat 0 1;zImage fat 0 1;Image.itb fat 0 1;uInitrd fat 0 1;2 fdtaddr=40800000 fdtcontroladdr=bae47f70 fdtfile=exynos4412-odroidu3.dtb fileaddr=42000000 filesize=aa1 initrdaddr=42000000 initrdname=uInitrd kernel_args=setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootwa} loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} boot.scr loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} ${fdtfile} loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} ${initrdname} loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} ${kernelname} mmcbootdev=0 mmcbootpart=1 mmcrootdev=0 mmcrootpart=2 scriptaddr=0x42000000 soc_id=4412 soc_rev=2.0
Environment size: 2090/4092 bytes switch to partitions #0, OK mmc0 is current device 7420680 bytes read in 4206 ms (1.7 MiB/s) 68337422 bytes read in 31408 ms (2.1 MiB/s) 53476 bytes read in 464 ms (112.3 KiB/s) Kernel image @ 0x40007fc0 [ 0x000000 - 0x713b08 ] ## Loading init Ramdisk from Legacy Image at 44007fc0 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 68337358 Bytes = 65.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43f07fc0 Booting using the fdt blob at 0x43f07fc0 Using Device Tree in place at 43f07fc0, end 43f180a3
Starting kernel ...
--- snap ---
and afterwards only the sad sound of the ventilator.
Does anybody have an idea what goes wrong? What can I do to get more information
Plus, I would be very interested in building an image on my own. Is there somewhere a howto that can help me with the first steps?
Although I have to admit that I am only a high-hearted amateur if it comes down to real technics..
Greetings
Dieter
-- magnum opus GmbH Tel: 08441/ 7978 107 Eichendorffstr. 19a Fax: 08441/ 7977 114 D-85276 Pfaffenhofen/Ilm http://www.magnum-opus.de GF: Dieter Thalmayr, Dieter Jäger RG: Neuburg / Donau · HRB 91.238 Ust-IdNr DE227355001 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org