Op maandag 26 november 2018 13:08:36 CET schreef Freek de Kruijf:
Op zondag 25 november 2018 22:53:41 CET schreef Andreas Färber:
My suggestion to you Freek would be to join us in IRC on Freenode's #opensuse-arm channel and we'll try to figure this out together.
I downloaded the Upstream Pine64 image, did put it on a 16 GB micro-SD, and started the Banana Pi M64 with it. It did boot, which I followed on the serial console, USB-TTL serial cable. However the Ethernet device did not come up. I did a reboot and now the Ethernet device comes up and gets addresses. Also zypper ref works. I inspected repository Factory-Contrib-Pine64 and u-boot-pine64plus is installed. There I also found u-boot-bananapim64, should that one be installed? Also journalctl gives only lines of 80 characters and 40 lines. I installed xterm and used resize to give the command "COLUMNS=132;LINES=41;export COLUMNS LINES;", which solved that problem. Pleased with the results so far.
Using IRC would be my first time. Will search how to use it.
So far I failed to use IRC. Nickname is freek. Tried also using the Because the installed openssh-7.8p1-1.1 does not allow ssh access I replaced it by openssh-7.9p1-198.1, which I found somewhere on OBS. I also did a "zypper dup --no-r" which replaced kernel-default from 4.19.2-1 to 4.18.15-1. Symbolic links in /boot all point to these new files. However "uname -a" still shows "4.19.2-1-default". Anyway it works and it uses the same aarch64 repository as for the Raspberry Pi 3B except for the u-boot... package. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org