On 9/11/19 8:31 PM, Freek de Kruijf wrote:
Op woensdag 11 september 2019 20:26:41 CEST schreef Freek de Kruijf:
I did have the same problem as Michael. After a "zypper dup --no-r" the system did not boot anymore. I used the serial connection with the RPi1 and there was no output at all.
So I did check the content of the first partition on the SD. It did lack the 6 files present in: raspberrypi-firmware-2019.09.04-1.1.noarch.rpm On my desktop I unpacked these files and put them on the first partition. After that the system boots again.
The question is: why were these files removed in the upgrade?
I found also the answer: they are wrongly placed in /boot/vc/ instead of /boot/efi/ .
I can confirm that manually copying the files fixed booting. Thanks. And as Freek I also suspect /boot/vc/ is wrong path because package raspberrypi-firmware-2019.09.04-1.1.noarch is installed but 1. partition is mounted on /boot/efi/. Ciao, Michael. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org