See $SUBJECT - the Leap 15.0 JeOS image fails to boot. openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz dd the .raw to a 16GB micro SD card on a linux desktop computer. Check the config.txt: mount /dev/sd_usb3_uSD2 /mnt -r /mnt/boot/vc/config.txt contains arm_control=0x200 (Ugh, mount point not empty) mount /dev/sd_usb3_uSD1 /mnt/boot/ -r /mnt/boot/config.txt contains arm_control=0x200 The last 2 blocks of the micro SD card are zeroes. Powerup: Green LED flashes briefly, colourwheel screen shows + disappears, stuck, with screen showing Net: No ethernet found. starting USB... USB0: Core release: 2.80a scanning bus 0 for devices... (After over an hour I gave up; it'd be useless anyway if it took that long to boot.) RPi3B+ with USB keyboard + mouse connected, monitor connected, Ethernet not connected, boot from micro SD card. This image is about 6 weeks old and doesn't boot. Can that be made to work? Does anyone know how? Thanks muchly, Volker -- Volker Kuhlmann http://volker.top.geek.nz/ Please do not CC list postings to me. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org