Am 27.04.2014 17:26, schrieb Freek de Kruijf:
I downloaded the image from http://download.opensuse.org/repositories/devel:/ARM:/13.1:/Contrib:/Raspber... Used the command "xzcat [image].raw.xz | dd bs=4M of=/dev/sdc; sync" to write the image to the SD card. While the SD card was still plugged in, I gave the command # parted /dev/sdc --script -- resize 1 1049kB 185MB which changed the FAT partition to 185MB, see the output below. # parted /dev/sdc --script print Model: SD/MMC Card Reader (scsi) Disk /dev/sdc: 3980MB Sector size (logical/physical): 512B/512B Partition Table: msdos
Number Start End Size Type File system Flags 1 1049kB 185MB 184MB primary fat16 boot, lba, type=0e 2 212MB 976MB 764MB primary ext4 type=83
Running this SD card in the Raspberry Pi does not bring up the network, although I do see activity on the network.
Note that YaST firstboot only comes up on HDMI (and thus needs a USB keyboard), so even with attached UART cable you'd just see an indication that it is starting. My work on getting an upstream-based JeOS image stalled unfortunately, but just yesterday I manually set up an SD card with latest 3.15.rc2+ kernel and Factory u-boot.bin and rootfs - apart from a shutdown timeout issue after zypper dup, things worked impressively great! Cheers, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org