-----Original Message----- From: Michael Ströder <michael@stroeder.com> Sent: 11 September 2019 16:17 To: Guillaume Gardet <Guillaume.Gardet@arm.com>; openSUSE ARM ML <opensuse-arm@opensuse.org> Subject: Re: [opensuse-arm] RPI1 does not boot after Tumbleweed upgrade
On 9/11/19 3:53 PM, Guillaume Gardet wrote:
From: Michael Ströder <michael@stroeder.com> Sent: 11 September 2019 13:55
On 9/11/19 1:47 PM, Guillaume Gardet wrote:
-----Original Message----- From: Michael Ströder <michael@stroeder.com> Sent: 11 September 2019 13:34
I'm running Tumbleweed on RPI1 (armv6). It does not boot after last upgrade to kernel from 5.2.10 to 5.2.13. During upgrade there were no error messages.
Did you update the kernel only, or the whole distribution (maybe including firmware)?
I did the usual full upgrade with zypper dup -l --no-allow-vendor-change --no-recommends
Did you run out of space, maybe?
No. There's plenty of space on the partitions: - The firmware partition still has 15MB available and 1.5M used. - On the OS partition (where's /boot) 4.9GB are still available.
If the rainbow screen is not display, this means that the firmware is not loaded/started properly. IIRC, there was a firmware update with latest snapshot.
Can I check whether the firmware files are complete?
I read again your 1st email and it seems that you are missing the firmware files on the 1st partition of your SD card. My list: total 6340 drwxr-xr-x 3 root root 2048 Sep 8 21:15 EFI -rwxr-xr-x 1 root root 28432 Sep 7 13:21 bcm2708-rpi-b-plus.dtb -rwxr-xr-x 1 root root 28173 Sep 7 13:21 bcm2708-rpi-b.dtb -rwxr-xr-x 1 root root 27950 Sep 7 13:21 bcm2708-rpi-cm.dtb -rwxr-xr-x 1 root root 28634 Sep 7 13:21 bcm2708-rpi-zero-w.dtb -rwxr-xr-x 1 root root 27898 Sep 7 13:21 bcm2708-rpi-zero.dtb -rwxr-xr-x 1 root root 29520 Sep 7 13:21 bcm2709-rpi-2-b.dtb -rwxr-xr-x 1 root root 31325 Sep 7 13:21 bcm2710-rpi-3-b-plus.dtb -rwxr-xr-x 1 root root 30706 Sep 7 13:21 bcm2710-rpi-3-b.dtb -rwxr-xr-x 1 root root 29504 Sep 7 13:21 bcm2710-rpi-cm3.dtb -rwxr-xr-x 1 root root 44472 Sep 7 13:21 bcm2711-rpi-4-b.dtb -rwxr-xr-x 1 root root 52296 Sep 4 12:07 bootcode.bin -rwxr-xr-x 1 root root 1476 Nov 30 2018 config.txt -rwxr-xr-x 1 root root 6736 Sep 4 12:07 fixup.dat -rwxr-xr-x 1 root root 6092 Sep 4 12:07 fixup4.dat drwxr-xr-x 2 root root 16384 Sep 8 21:01 overlays -rwxr-xr-x 1 root root 2877892 Sep 4 12:07 start.elf -rwxr-xr-x 1 root root 2762820 Sep 4 12:07 start4.elf -rwxr-xr-x 1 root root 8 Sep 8 21:16 startup.nsh -rwxr-xr-x 1 root root 443036 Jul 18 12:21 u-boot.bin You can get them from the raspberrypi-firmware package: http://download.opensuse.org/ports/armv6hl/tumbleweed/repo/oss/noarch/raspbe... You can use ark or 7zip (any other archive extractor) to extract the files from this RPM. I tried the latest JeOS-raspberrypi image for RPi1 from http://download.opensuse.org/ports/armv6hl/tumbleweed/images/openSUSE-Tumble... and I have no problem. Cheers, Guillaume
I have some RPi1 on my desk, I will try to have a look by the end of the week.
Thank you.
Ciao, Michael.
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.