gpio_regulator has to be included into initrd to make mmc working. 25.11.2017 21:27, Matwey V. Kornilov пишет:
Hm. It refuses to boot after KIWI deployed. For some reason dracut-generated initrd failed to obtain /dev/mmcblk? devices.
14.11.2017 15:05, Matwey V. Kornilov пишет:
Now It is booting.
Now, I cannot figure out how to configure networking:
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 532 link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff inet6 fe80::251:82ff:fe11:2200/64 scope link valid_lft forever preferred_lft forever 3: wan@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff 4: lan0@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff 5: lan1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff
2017-11-14 14:48 GMT+03:00 Matwey V. Kornilov <matwey.kornilov@gmail.com>:
mSD card is enabled in kernel dtb file only in 4.14.
https://github.com/torvalds/linux/commit/9be778f6c6d8f90ff2fad88d1770e2a7843...
2017-11-14 14:09 GMT+03:00 Matwey V. Kornilov <matwey.kornilov@gmail.com>:
Well, 4.13.12-1-default has issues with mmc-driver, so KIWI cannot find boot device.
[ 9.651177] sdhci: Secure Digital Host Controller Interface driver [ 9.651182] sdhci: Copyright(c) Pierre Ossman [ 9.652213] sdhci-pltfm: SDHCI platform and OF driver helper [ 9.655798] xenon-sdhci d00d0000.sdhci: failed to get IRQ number [ 9.655809] xenon-sdhci d00d0000.sdhci: sdhci_pltfm_init failed -6
I will see, if different version of dtb file helps.
-- With best regards, Matwey V. Kornilov
-- With best regards, Matwey V. Kornilov
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org