On 08.09.14 17:50, Guillaume Gardet wrote:
Le 08/09/2014 16:01, Alexander Graf a écrit :
On 08.09.14 15:26, Guillaume Gardet wrote:
Hi,
Fatcory:ARM repo has new JeOS (E17 and XFCE) images but there are some ghost files remaining.
Pandaboard and Beagleboard boots u-boot but then hangs after "Starting kernel ...". Beagle should use a newer u-boot managing FDT for Beagle. Is there any known problem with Factory Kernel for OMAP3/OMAP4 boards? Phew, I haven't tried. But the QEMU beagle emulation I mentioned earlier could be very useful in finding out.
Maybe. I will try to find out without qemu. I prefere real hardware. ;) I will update JeOS-beagle to use FDT once u-boot get updated in Factory.
Well, the nice thing about qemu is that you can attach gdb to the system. Of course if you have a JTAG you can try to debug it on real hardware too ;).
Arndale : Does boot u-boot but fails with a "Wrong Image Format" which should be fixed by SR #248024 (already accepted by Alex, thanks). I fixed it manually before the SR were accepted but I get lots of "cpufreq: __target_index: Failed to change cpu frequency: -22" errors logged but I finaly get a prompt. Yes, you can work around this by echo'ing "performance" into the governor sysfs file. I haven't quite figured out what's going wrong here.
Ok. It seems that the CPU voltage cannot be adjusted ("exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1100000"). Maybe we are missing a power chip driver in the kernel?
Maybe - I have no idea about power chip drivers :). Can you take a look?
Serial console and USB2 work, but eth0 seems to have some problems. Second boot seems to be broken (I fallback to a dracut prompt). I though I had fixed that one. The problem is that dracut doesn't include all modules required to access the SD card. So I added them to INITRD_MODULES in /etc/sysconfig/kernel in config.sh.
Can you please check on first boot whether the line was properly updated?
There is no /etc/sysconfig/kernel file on firstboot.
O_o. There should be. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org