Op donderdag 4 april 2019 21:01:07 CEST schreef Freek de Kruijf:
I searched on the Internet for the answer. Did not find even the question.
Is there any support for a Raspberry Pi camera, bcm2835, on a Rasphberry Pi in an openSUSE system?
Started with the latest Tumbleweed image for the Raspberry Pi 3B (aarch64). This one contains kernel version 4.20.13-1.1. Did find some information, even found that the kernel module bcm2835-v4l2 is present in the kernel-default package. Also found that gpu_mem in /boot/efi/config.txt needs to be at least 128. Did give the command "modprobe -i bcm2835-v4l2 which indeed loaded the module together with other modules. However got the warning: bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. And the error messages: bcm2835-v4l2: error -1 while loading driver bcm2835-camera: probe of bcm2835-camera failed with error -1 After removing this module and installing it again I got: vchiq: module is from the staging directory, the quality is unknown, you have been warned. vchiq: vchiq_init_state: slot_zero = ffff00000cb75000, is_master = 0 bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase vchiq: could not load vchiq bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. The visible result is that the device /dev/video0, which should appear, is not present. Is there anything I can do to improve the situation? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org