On 23.11.14 10:03, lists wrote:
On Sun, 23 Nov 2014 08:46:25 +0100 Alexander Graf <agraf@suse.de> wrote:
Am 23.11.2014 um 06:37 schrieb lists <lists@lazygranch.com>:
On Sat, 22 Nov 2014 14:25:31 -0800 lists <lists@lazygranch.com> wrote:
On Sun, 23 Nov 2014 01:09:20 +0400 "Matwey V. Kornilov" <matwey.kornilov@gmail.com> wrote:
2014-11-23 0:00 GMT+03:00 Zack Piper <zack@apertron.net>:
On Sun, Nov 23, 2014 at 12:50:44AM +0400, Matwey V. Kornilov wrote: > 2014-11-22 23:44 GMT+03:00 Zack Piper <zack@apertron.net>: >> The BeagleBone Black JeOS image, I have not been using the boot >> switch button, I have tried it, no LEDs lightup. > > Which version? 13.1 13.2 Factory? > >> Another qustion, does the openSUSE image automatically activate >> a tty-over-USB at all? > > No > > > -- > With best regards, > Matwey V. Kornilov > http://blog.matwey.name > xmpp://0x2207@jabber.ru Oops, sorry, I am using 13.2.
Hm, I've tried this couple hours ago, it worked. However, first boot takes several minutes.
Is there a guide on enabling tty-over-USB?
It is disabled in config, I don't know why.
I see a new image (26.3 of JEOS 13,2) has been uploaded. I'm downloading it now, will flog it and report my findings. Note there is no sha256 for the download.
However just to be clear, on rev 26.2, the USB was totally not functional. It would not recognize usb devices plugged into it. lsusb only detected the usb chip on the SBC,
There is some confusion on the interwebs about which serial cable to get. I can say the FTDI one from Adafruit works fine. But the ethernet connection worked on the initial installation, so if somebody got lucky, they wouldn't need the serial cable. You would be installing the OS in the blind, which is why I mentioned luck.
The 26.3 rev has issues. The serial port doesn't work well. This problem wasn't evident in the 26.2 rev. USB still doesn't work.
Looks like it's working to me ;). The serial port issues usually come from a loose cable. If you press against the serial pin connectors they should go away.
Alex
I have a SD card with Debian and it works just great on the serial port. No hardware problems on my end.
I just loaded Angstrom. Serial output at the end of the message. Are you using JEOS?
Yeah.
I find the serial port failing to display characters on the JEOS 13.2 rev 26.3. The data is sent, but don't get echoed.
How do you see this is happening? I'll get a new BBB tomorrow that I'll slam 13.2 onto. Then I can let you know whether it works for me ;). Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org