Hello, Sad Clouds. On 24.04.14 1:08 you wrote:
Hello, could I ask if OpenSuse 13.1 works with beaglebone? I followed instructions on https://en.opensuse.org/HCL:BeagleBone_Black However I get as far as "Starting kernel" and then nothing else happens. Any ideas? U-Boot 2013.04 (Mar 17 2014 - 15:34:07) I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 mmc0 is current device SD/MMC found on device 0 1948 bytes read in 5 ms (379.9 KiB/s) Running bootscript from mmc0 ... ## Executing script at 80200000 kerneladdr=0x80200000 ramdiskaddr=0x81000000 mmc0 is current device 4500264 bytes read in 571 ms (7.5 MiB/s) 65308180 bytes read in 8153 ms (7.6 MiB/s) 21959 bytes read in 13 ms (1.6 MiB/s) ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 65308116 Bytes = 62.3 MiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f885c6 Starting kernel ... Hi,
It worked some time ago, but you need fetch images from home:matwey:beaglebone -- Best regards! Posted using Hotdoged on Android -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org