Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set. I see in the boot text there is a way to interrupt the automatic boot, which I presume is a way to set parameters. Could someone give me what such a line would look like for forcing the mpurate? --------------------------------------- Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM Reading boot sector Error: reading boot sector fat load failed, trying ext2 Loading u-boot.bin from mmc U-Boot 2011.09 (Sep 08 2012 - 02:13:25) OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #67dc00029ff80000016849a90401601a Net: No ethernet found. Hit any key to stop autoboot: 0 The user button is currently NOT pressed. SD/MMC found on device 0 Loading file "uEnv.txt" from mmc device 0:1 (xxa1) ** File not found uEnv.txt Loading file "boot.scr" from mmc device 0:1 (xxa1) 711 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 80200000 ## Error: "kerneladdr" not defined ## Error: "ramdiskaddr" not defined Loading file "uImage" from mmc device 0:1 (xxa1) 4242344 bytes read Loading file "initrd" from mmc device 0:1 (xxa1) 12464100 bytes read ## Booting kernel from Legacy Image at 88000000 ... Image Name: Linux-3.7.9-0-omap2plus Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4242280 Bytes = 4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12464036 Bytes = 11.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org